PROVN OF RECEIPT AND DESPATCH OFFICE CUM INSPECTION SHED FOR DRY RATION WITH TOILET AT 372 COY ASC SUPPPLY DEPOT AREA AND SECIAL REPAIRS TO ROOF, FALSE CEILING, PLINTH PROTECTION, JOINERY AND SANITARY FITTINGS IN BLDG NO. T 73 ASHOK ROAD UNDER GE S

Amount

Excavation over areas not exc 1.5m deep & getting out in soft / loose soil complete all as specified and as directed.

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 Mtr in depth and getting out in any type of soil complete all as specified and as directed.

M&L for moorum/Red bajri filling in floors or paving, laid in layers n exc 15cm thick spread, levelled and rammed including watering complete all as specified and as directed.

M&L for hardcore of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface using broken stones or boulders, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated soil exc. 50m but n exc 100m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) as in fdn, filling & mass concrete complete all as specified and directed.

M&L for RCC M-25 design mix (using 20 mm graded stone aggregates) as in column footings, base of column and plinth beams etc complete all as specified and directed.

M&L for RCC M-25 design mix (using 20 mm graded stone aggregates) as in columns complete all as specified and directed.

M&L for RCC M-25 design mix (using 20 mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC M-25 design mix (using 20 mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC M-25 design mix (using 20 mm graded stone aggregates) as in chajjas complete all as specified and directed.

M&L for form work to sides of columns footing as in fair finished surfaces of concrete complete all as specified and directed.

M&L for form work to sides & soffits of plinth beam and sides of footings getting for fair finished surfaces of concrete complete all as specified and directed.

M&L for form work to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. for fair finished surfaces of concrete flat complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; n exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat complete all as specified and directed.

M&L for form work to chullah hoods, chajjas, troughs & similar items including edges Rough finished surfaces of concrete flat complete all as specified and directed.

M&L for random rubble stone walling, brought up to course, well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified and directed.

Demolition of brick work and stone/ boulder masonary built in cement mortar and lime mortar complete all as specified and directed.

M&L for for brick work built in cement mortar (1:6) with sub class 'B' bricks old size straight or curved on plan exc 6m mean radius complete all as specified and directed

All as per item No 20 as above but except bricks Note:- Serviceable bricks obtained from Srl item No.19 above shall be re-used in this item.

M&L for brickwork with sub-class `B' brick old size, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L for rendering 20mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:6) finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of concrete surfaces in CM (1:3) as in ceiling complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brickwork or concrete surfaces in cement mortar 1:4 complete all as specified and directed.

M&L for two coat cement plaster ,first coat 10mm thick in CM 1:6 and second coat with 5mm thick in CM 1:4 mixed with WPC finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately)

M&L for applying three coats of white wash on new Ceiling surface including preparation of surface complete all as specified and directed.

M&L for applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coat of oil bound distemper over a coat with alkali resistant primer incl. preparation of new wall surfaces of walls etc complete all as specified & directed.

M&L for prepration of new plastered surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer, properly making of v shape crakes and filling of all crakes with crakes seal of walls complete all as specified and directed by Engr-in-charge. Make Asian ACE or equivalent make as approved by GE

M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with elaps complete all as specified and directed.

M&L for TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

All as per Srl item No 31 above but TMT bars 5mm dia and over including 10mm dia as in stirrups complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregates) as in benching (padding etc), floor finishes, etc complete all as specified and directed.

M&L for non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

M&L for glazed ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in vertical surfaces such as skirting, dado, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rendering in cement mortar 1 : 4 complete all as specified and directed.

M&L for glazed ceramic tiles of size 450mmx300mmx7mm thick as in vertical surfaces such as skirting, dado, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rendering in cement mortar 1 : 4 complete all as specified and directed.

M&L for non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

S&F steel ventilators with top hung shutter including hinges,steel peg stay, complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet reinforced with M.S Square tube complete all as specified and directed.

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour sheet on back face complete all as specified and directed.

S&F 125mm butt hinges heavy weight, cold rolled mild steel, fixed with screws or welded complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and directed.

S&F sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square but 0.5 sq.m in each pane complete all as specified and directed.

Dismantling false ceiling any description or in any thickness, including cover fillets complete allas specified and directed

M&L for suspended false ceilling comprising of 600x600x7mm thick vinyl face, cinyl covered edges and washable metallized polyster foil backing, weight @ 5.6Kg/m2 suspended false ceilling comprising of non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sourrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm center to centre including hangers 6mmm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified. Make : ArmGyp-FB Ceilings (Armstrong) Model : Sleet (Alpha Lite)

M&L for 75mm thick PCC 1:3:6, type C-2 (using 20mm graded stone aggregates) as in plinth protection surface finished even and smooth without using extra cement provided with construction joint 10 x 20mm filled with bitumen and sand mortar 1:3 complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F mild steel rolled section conforming to Fe-290 (Gde E-165), angle or tee section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats and other connecting plates etc. complete all as specified and directed.

S&F pre- coated galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa (AZ 150) as in roof covering/ clading to wall, including crimping sheet at end fixed with self tapping screws complete all as specified and directed. Make:- JSW (Colourn) or equivalent as approved by GE

S&F pre- coated galvalume aluminum zinc coating GI based steel sheet of 0.50 mm thick of any colour having tensile strength of 550 mpa (AZ 150) as in ridges of roof covering profile type and plain sheet as in valley gutter etc, fixed with self tapping screws complete all as specified and directed. Make:- JSW (Colourn) or equivalent as approved by GE

S&F mild steel for wind ties for roof including securing bolts, posts including all necessary drilling, bolting or reveting, painting etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specfied and directed.

M&L for for applying two coat synthetic enamel paint over a coat of red oxide over new steel surfaces of any description, over 10cm in width or grith, not otherwise described complete all as specified and directed.

M&L for for applying two coat synthetic enamel paint over a coat of red oxide over new steel surfaces of any description, not exc 10cm in width or grith complete all as specified and directed.

S&F kitchen sink made of stainless steel 1mm thick with plugs, washers, coupling & down take waste piple ; including bedding in CM on to dwarf wall or including fixing cantilever brackets & connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F vitreous China wash down water closet pan (pedestal pattern), coloured, with and including CP health faucet, coloured plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, ( excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern 10 ltr capacity, low level, white, with intel, ball valve, float & handle including brackets etc complete all as specified and directed.

S&F vitreous China urinal half stall type white with grating and union for discharge pipe , waste pipe (excluding flushing cistern,flush pipe ) complete all as specified and directed.

S&F vitreous China WHB white flat back size 550mmx400mm including S&F angle iron brackets, C.P swan neck pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F Bib taps 15 mm bore, cast copper alloy chromium plated with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed.

S&F angular/ stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F PVC connections 15mm bore and 450mm long with PTMT/Brass nuts of length 450mm complete all as specified and directed.

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position complete all as specified and directed.

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F soap dish, vitreous China white, approximate sixe 160x160x90mm complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed.

S&F GI tubing `medium grade' galvanised with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore complete all as specified and directed.

S&F GI tubing `medium grade' galvanised with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore complete all as specified and directed.

M&L for cutting chases, pinning in making good to facings where required abd pointing in cement mortar1 : 3 to ends of or edges of landing steps, cills sun shades, shelves, lintels e.t.c and cutting chases for concealed water tubing or conclealed conduit wiring e.t.c and making good cutting n. exc 10 Cm girth in brick wall complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls complete all as specified & directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F 110mm PVC(SWR) vent cowl complete all as specified and directed.

S&F 110mm PVC (SWR), Junction single, (Single T) equal or unequal), fixed with solvent cement, with oval access door, complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F 75mm PVC(SWR) bends any radius complete all as specified and directed.

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 110 mm bore drain pipe complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregates) as in bedding under & haunching against the side of pipe after they are laid and tested for 110mm dia internal of pipe complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregates) as in manhole cover slabs set in cement mortar 1 : 4 complete all as specified & directed.

M&L for cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregates) as in coping complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregates) as in surface channels & drains complete all as specified and directed.

M&L for extra for forming fair finished drain or channel n exc 30 CM inner girth in cement concrete using extra cement including forms , moulds , mitred ,stopped end etc complete all as specified and directed..

Add or deduct for fair finished drain or channel each 25 mm girth or part thereof over or under 30 cm in cement concrete,using extra cement,including form, moulds,mitred/stopped ends etc complete all as specified & directed.

Supply only integral water proofing compound, ISI marked complete all as specified and directed.

M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items and all as specified as under:-

10mm thick plastering in CM(1:4) mixed with WPC @ 3% by weight of cement applied over roof slab Note:-WPC shall be measured and paid separately

The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing & dusting and a groove shall be cut for cast iron drain outlets

Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm

Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane

Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces

S&F aluminium window with and including aluminium powder coated frame of aluminium section 101.60x44.50 x1.5 mm thick with shutters double shutter (one with glass and one with wire gauge) having styles of aluminium section 84.50 x 44.50 x 1.5 mm thick and rail of aluminium section 84.50x44.50x1.5mm thick including jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handles etc including providing and fixing 4.8mm thick tinted glass and one shutter with stainless wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staple secured with rubber beading ,Including Aluminium chequred Deco grill of 50x50 mm mesh with suitale aluminum section screwed fixed complete all as specified and directed

S&F glazed aluminum door powder coated of any colour consisting of frame of 63mm x 38 mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 84.50 x 44.50 mm , bottom rail & lock rail size is 110 x 44 .50 mm & style of door shutter is 84.50 x 44.50mm glazed with 5mm thick tinted /colour glass of approved make with handles 2 Nos in each door, hinges to be fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangement,floor spring and floor door stopper incl. necessary joining cleats , glazing clips etc complete (Al. section thickness 2 mm } ) confirming to IS complete all as specified and directed. Make - Jindal Aluminum / Man Industries or equivalent as approved by GE.

S&F in repair 25 mm bore SS Pipe curtain rods including SS Brackets & Decorative dome, suitable for door/widows curtain with fancy type powder coated ms dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as directed by Engr-in-Charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position and removing to store. complete all as directed by Engr-in-Charge.

M&L Mild Steel Rolled tubular sections as in main and cross beams, hip and jack rafters; purlins Posts where connected to common rafters and angle cleats or other connecting plates incl wind ties etc Fe410 Gde E-250) Quality A complete all as specified and directed

S&F MS framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

S&F expanded metal, not exceeding 4 kg per Sqm in weight, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.90mm dia or fixing with galvanised steel staples fixed complete to wood or iron members complete all as specified and directed.

Taking down cement plaster on brick wall etc including racking out joints hacking for key, scrubbing down with water as described.

M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished fair and even complete all as specified.

M&L for one coat of synthetic enamel paint on old painted wood/wood based surface of any desription over 10cm width or girth incl preparation surfaces such as removing all splashes, drops, dirt and leaving premisesin a clean state complete all as specified and directed

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:1 complete all as specified and directed.

Demolition of cement concrete not exc 15 cm thick below or above ground level as in floors, paving etc including removal of demolished material from work site complete all as specifed and directed.

Taking down chowkat with shutter n.exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specifed and directed.

Taking down chowkat with shutter exc 1.5 Sqm but n.exc 4 Sqm each complete all as specifed and directed.

Taking down shutters of any description n. exc 1 Sqm each etc complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each etc complete all as specified and directed.

S&F second class hard wood plain, solid, straight, chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints complete all as specified and directed..

M&L for preparing surface of wood and wood based material and steel and iron work of any description and girth and treating ends of post, back of chowkats etc, area exc. 0.1 sqm and n.exc. 0.5sqm, with tar or coal tar or black paint complete all as specified and directed.

S&F 30mm thick second class hard wood factory made glazed and skeleton shutters , open rebated and prepared to receive glass, guaze, etc.(with sash bars), edges of framing plain chamfered or rounded fitted with cut and metered beads for securing glass etc . complete all as specified and directed.

S&F 30 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specified & directed.

S&F 35mm thick second class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc divided into panels with plain or mitered shash bars any numbers of panels, edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc,complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F mild steel door consisting of MS angle iron frame of 40x40x5mm with MS shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet,sheet welded with 14X 3 mm thick flat all around of panel,30X30X5 mm tee fixed in between shutter partition, welded to with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm long including MS angle iron frame 40mm x40mmx5 mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width 0.8 to 1.2 m and ht 1.9 to 2.10 M.]

S&F galvanised mild steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire stapels complete all as specifed and directed.

S&F in repair galvanised mild steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire stapels complete all as specifed and directed.

S&F aluminium barrel tower bolt,of extruded section, with bright bolt and fixed 125mm long complete all as specifed and directed.

S&F alluminium alloy anodised,sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet,cast ortruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 300mm long complete all as specifed and directed.

S&F 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as specifed and directed.

S&F 125 mm size aluminium handles, cast type, anodised complete all as specifed and directed.

S&F mild steel bands,straps, supports or stays for rainwater pipes, soil/waste or vent pipes including bolts, if required, hold fast and similar small articles conforming to Fe 290 Gde E-165 complete all as specifed and directed.

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding, removal servicable tiles to store and rubbish off the premises complete all as specifed and directed.

M&L for non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

S&F GI tubing `medium grade' galvanised with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore including taking up or down steel tubing and connections complete all as specfied and directed.

S&F GI tubing `medium grade' galvanised with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore including taking up or down steel tubing and connections complete all as specfied and directed.

S&F in repairs 15 mm dia bib tap cast copper alloy (fancy type), chromium plated, 'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specfied and directed.

S&F in repair vitreous China WHB white flat back size 550mmx400mm including S&F ms brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repairs stop valve, cast copper alloy, fancy type,chromium plated with long shank and cup (Concealed type), screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe all as directed.

S&F in repairs gun metal globe or gate valve with iron wheel screwed bothedns for iron pipe of 20 mm dia all as directed.

S&F in repairs 1000 ltr capacity of rotational moulded polyethyline water storage tank (Cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position incl S&F 20mm dia GI Pipe medium grade washout pipe 450mm long with plug & 20mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified and directed.

S&F in repairs vitreous China squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including P or S trap, etc complete all as specified and directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), coloured, with and including plastic water closet seat cover, coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, including cp jet spray, fixing bolts, flushing cistern and flush pipe and connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend etc. complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames complete all as specified and directed..

S&F in repairs 110mm dia PVC(SWR) pipes single soketed in any length with adhesive joint fixed to wall including ms clamps complete all as specified and directed..

S&F in repairs110mm dia PVC(SWR) pipes single soketed in any length with adhesive joint fixed to floor or trenches including fittings complete all as specified.

S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .

S&F in repair 110mm PVC(SWR) bends any radius with acess door complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors with fittings complete all as specified and directed.

S&F in repair 75mm PVC(SWR) bends any radius with acess door complete all as specified and directed.

S & F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant etc complete all as specified and directed.

S & F in repairs for 110 mm dia PVC ( SWR) floor trap with grating including jointing with solvant etc complete all as specified and directed.

S&F in repair 110mm PVC(SWR) vent cowl complete all as specified and directed..

S&F in repair 75mm PVC(SWR) vent cowl complete all as specified and directed..

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste pipe and waste coupling complete all as specified and as directed.

Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc., complete all as specifed and directed

Taking down main switches/DBs/ changeover/AC box of any capacity complete all as specifed and directed

M&L for concealed point wiring for one light/fan point controlled by one switch with 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, , including of junction and terminal boxes, all fittings such as tees, bends, elbows, etc. of external diameter 20mm all as per site requirements including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete allas specified and directed. Make– Havells/Polycab/Finolex

All as per Srl item No.148 above but for 5 Amp independent socket point controlled by one switch

All as per Srl item No.148 above but for one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.148 here-in-before but for power point wiring with 2.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continious earth lead.

S&F switch piano type flush, single pole, one way 5A, 230V complete all as specifed and directed. Make:-Havells Reo series/Anchor/Plaza.

S&F socket outlet, 5 pin, 5 Amp, flush type, 230V complete all as specifed and directed. Make:-Havells Reo series/Anchor/Legrand.

S&F ceiling rose, surface backlite, three terminal complete all as specifed and directed. Make:-Havells Reo series/ Anchor/Plaza.

S&F lamp holder insulated with back plate with 9 watt LED bulb suitable for Angle/Batten fitting complete all as specified and directed. Make-Anchor /L&T/Havells Reo. Make of bulb - Havells/Bajaj/CG

S&F switch piano type flush, single pole, one way 15A, 230V complete all as specifed and directed. Make:-Havells Reo series/Anchor/Plaza.

S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specifed and directed. Make:-Havells Reo series/Anchor/Plaza.

S&F sub main wiring with two single core FR PVC insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge. Make of wire -Havells/Polycab/Finolex

S&F testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specifed and directed. Make:- Havells/C&S/ABB

S&F testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specifed and directed. Make:-Havells/C&S/ABB

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar incl TW board of suitable size complete all asspecified and directed. Make:- Havells/C&S/ABB

S&F electronic double space rotary veriable speed type regulator 80 Watt complete all as specifed and directed. Make -Havells Reo series/Anchor/Plaza.

M&L LED 18 watt fitting for surface mounted lumanaires batten with extrued PVC housing and robust long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brightness complete all as specifed and directed. Make:- Havells LHEXBLP7PN1W018 LED 4 feet or eqvt in PhIlips/Wipro

S&F box type LED fitting 1x9 Watt 2 feet box type complete all as specifed and directed. Make:-Havellls /Wipro/CG all as specified and directed by Engr -in -Charge

S&F exhaust fan 250 MM sweep PVC body incl Lovers complete incl making holes in any constucion complete all as specified and directed. Make - Havells/CG/Bajaj

S&F ceiling fan 1200 mm sweep 5 star rating confirming to IS metallic white colour with, single phase connecting with existing point for suitable wire with all accessories complete all as specified and directed. . Make - Havells ES-50/Crompton HS Plus/Orient ECCO Tech/Bajaj Excel Star.

S&F ENDURA SLIM PRO PLUS 2 X 2 ultra slip recess mounted luminaire with high brightness LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling complete all as specified and directed. Make-Havells cat Part No LHECDIL5PP1W036, 3000K or equivalent in CG/Wipro

Supply, laying and testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified and directed

M&L for bricks of old size as in cable protection covers complete all as specified and directed

M&L for clean, dry sand filled in trenches/ducts for cushioning of cables complete all as specified and directed.Note :- The depth of cushion after punning shall only be measured.

M&L for the GI tubing of size 25 mm bore, medium grade, ISI marked complete all as specified and directed . Make - Jindal/swastik

M&L for provn of earthing complete with MS galvanized earth plate electrode 600x600x6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below normal GL) with top edge of plate not less than 1.5 M below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of CI or steel incl excavation, PCC (1:3:6) type C-1 chamber with CI cover 10 mm thick, 15 mm dia light grade , GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia, medium grade, lugs, main earthing lead upto main switch/DB incl charcoal dust, salt etc all as shown in electrical plate No. 3 of SSR part-I 2009 specification complete all as specifed and directed.

M K Construction

maharaja construction and suppliers