ADDITION AND ALTERATION TOBOUNDARY WALL NEAR NAMRADA BUILDING AT VIKRAM ENCLAVE HALDIA UNDER GE (I) (CGN) KOLKATA

Amount

Dismantling mild steel work of any description not otherwise provided for all as specified and as directed by the Engr-in-Charge.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete all as specified and as directed by the Engr-in-Charge.

Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed by the Engr-in-Charge.

Demolition of cement concrete in any description or any position not otherwise specially provided for complete all as specified and directed..

Demolition of Reinforced concrete slab complete all as specified and as directed.

Material and labour for Silver Sand filling under floors or in foundation including watering and consolidation and ramming complete all as specified and as directed.

M & L hardcore of 40 to 53 mm stone agregate and stone dust in voids compacted in layers deposited, spread and levelled in layers exc. 15 cm thick, watered and rolled/rammed to a true surface

Material and labour for pre-cast RCC (1:2:4) type B-1 (using 20 mm graded aggregate), drain cover slab, set in cement mortar (1:4) including all necessary form work complete all as directed

M&L for broken glass coping on top of walls in CM (1:3) all as specified and as directed.

Material and labour for Providing cement concrete type B-1,1:2:4 (using 20 mm graded stone aggregate) as in benching concrete,coping ,hold fast etc complete all as specified and directed.

M & L for brick work with fly ash bricks of class designation 7.5 as per IS 12894: 2002, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L RCC M-30 design mix (20mm graded stone aggregate) as in foundation, incl rafts footing foundations beams, plinth beam & mass concrete complete all as specified and as directed.

M&L RCC M-30 design mix (20mm graded stone aggregate) as in Column pillar, posts & struts complete all as specified and as directed.

M&L RCC M-30 Design mix (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50M span complete all as specified and as directed.

Formwork to side of concrete foundation footing bases of columns, raft and raft beams,sides and soffits (if any) of foundation & plinth beams and similar work vertical or better comolete all as specified and as directed.

Formwork for side of pillars, posts, struts & column similar work vertical or better complete all as specified and as directed.

Formwork for side and soffits of floor or roof beams, beam haunching, girders, bressummers, lintals, cantilevers, shelves including supports, overhang etc also splays between floors and beams etc. complete all as specified and as directed.

Material and labour for rendering 15 mm thick, set in cement mortatr (1:4), as on brick/concrete surface etc finish even and smooth without using extra cement complete all as directed.

Supply and fixing for mild steel TMT bars, 10mm dia and above , cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed)not less than 0.90 mm dia complete all as specified and directed.

M&L TMT bars 5mm dia and over upto and incl 10mm dia in stirrups cut to length bent to shape required incl cranking bending spirally for hoping & stirrups for col, hooking ends and binding with mild steel wire (annealed) n less than 0.9mm dia or securing with clips complete.

Material and labour for fabrication of MS angle iron post or posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by the Eng-in-Charge.

Supply & Fixing for 2.24mm dia 2 strand galvanised steel barbed wire with 2mm dia barbs at 75mm spacing and staining and fixing to any type of standard railing strainning both including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pin etc after and including dismantling of existing unserviceable barbed wire complete all as specified and as directed by the Engr-in-Charge.

Material and labour for preparation on new plastered surfaces of wall and applying two coats of anti fungal weather proof paint over a coat of primer complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by the Engr-in-Charge.

Material and labour applying two coats of synthetic enamel paints over one coat of red oxide primer on steel surfaces n exe 10cm in width or girth including preparation of surfaces complete all as specified.

Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour preparation of old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds,etc and applying one coat of anti fungal weather proof paint on walls complete all as specified and directed.

Supply & Fixing in repair stainless steel concerntina coil fencing with punched tape concerntina coil 600mm dia 10 mtr openable length (total length 90mtr), having 50 nos round per 6 mtr length upto 3 mtr heigth of wall with 9 horrizsontal RBT reinforced barbed wire, stud tied with GI satples and GI clips to retain horrizontal, including nessesary bolts or GI barbed wire tied with angle iron complete all as specified and as directed

Supply only liquid integral water proofing compound complete all as specified and as directed by the Engr-in-Charge.

BHARAT TRADING CORPORATION (BID ID -3216327)

SANJAY KUMAR SUPAN (BID ID -3216354)