Loading…
Loading…
Tender Value
₹27.7 L
EMD Value
₹55,400
Closing Date
30 Jul 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELECTRICAL
12 conditions · 1 needing a document upload
The tenderer shall posses the valid Electrical Contractor's license and Supervisory License issued by any State/Central Govt. licensing board for the required voltage level or above with their tender paper. Tenders without valid electrical contractor's license & Supervisory license will summarily be rejected.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
23 conditions · 6 needing a document upload
Scanned copy of PAN (Permanent Account Number) and Goods and Services Tax Registration Certificate indicating GSTIN should be uploaded. In case of non-availability / non-applicability of any of these documents, reasons should be furnished under 'Remarks'. GSTIN along with other details required under CGST/SGST/UTGST/IGST Act may also be submitted by the successful tenderer immediately after the award of contract.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Attested copies of the documents pertaining to constitution of the concern (Sole Proprietorship Firm / Partnership Firm /Registered Company/ Registered Trust / Registered Society /HUF etc.) as described in detail at clause no.14 of Tender Form (Second Sheet) of GCC 2022 as well as legal competency of the person signing the tender offer (Power of Attorney) should be uploaded clearly indicating the nature of the firm. Power of attorney shall be submitted even if the person signing on behalf of the tenderer is authorized for that purpose through partnership deed / Memorandum of Understanding / Article of Association or such other document, failing which tender is liable to be rejected. Sole proprietorship firm shall have to submit notarized copy of the affidavit. In case the tender is signed and submitted by the proprietor himself /herseIf, no power of attorney is required. Railway reserves the right to legally scrutinize original copies of such documents as and when required. After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no suchmention is available in tender offer submitted.
The tenderer will have to make payment towards Earnest money deposit (EMD) against this tender through online payment modes like net banking, debit/ credit cards etc. available on IREPS portal (www.ireps.gov.in). The tenderer is required to pay the Earnest Money deposit before he can prepare and submit his bid. Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Earnest Money on submission of Registration Certificate issued by appropriate authority. 100% Govt. owned PSUs shall be exempted from payment of earnest money deposit. Labour Cooperative Societies shall deposit only 50% of above earnest money deposit on submission of necessary documents.
In support of their credentials, the Tenderers should submit along with their tenders document - List of Plant and Machinery available on hand (own/hired) and proposed to be inducted (own/ hired) to be given separately for the subject work .
The Earnest Money and Cost of tender booklet : There is one mode for submssion of EMD through online payment. The bidders will have to make payment towards tender document cost and earnest money against the tender through online payment modes like net banking, debit/ credit cards etc. available on IREPS portal in favour of FA & CAO, ECR, Hajipur payable at Hajipur executed by State Bank of India or any of the Nationalized Banks or Scheduled Bank.
Eligibility criteria for works tender in respect of partnership firms:-
in case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
JOINT VENTURE will not be permitted for the tenders.
Any Conditional offer will be summarily rejected.
Rates are inclusive of all taxes/GST, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
Earnest Money and Tender Document Cost: -All the tenderers / Contractors have to deposit full earnest money and tender document cost as stipulated in the tender document through online modes as permitted in IREPS application.
Upgradation of overhead line under juriction of SSE(Electrical)/Power/NKE.
EL-G-SPJ-14-ET-26-27
EL-G-SPJ-14-ET-26-27
Open
Works - General
180 Days
Samastipur, Bihar
₹0
₹55,400
30 Jul 2026
7 Jul 2026
16 Jul 2026
19 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 27,69,703.41 | ||
| — | 7.00 | — | — | ||
| Provision, Fabrication and comissioning of 11 KV 3 phase Gang Operated Switch on the top portion of pre-erected H- pole/4 pole structure capacity - 400 Amp conforming to IS: 1818 complete with drop out fuse conforming to ISS-9835 (Pt.II) of 1980 along with mounting channel/angle iron insulator etc. all respect including supply of all required material. Balaji Engineers, Jaipuria Brothers Electricals, Rama Engineering Works, and Rashtriya Electrical & Engg Corporation. | — | — | — | 46,970.91 | |
| — | 1.00 | — | — | ||
| Supplying, installation, testing & commissioning of cubicle type LT panel suitable for 415V, 3 Phase, 4 Wire 50 Hz Ac supply system, fabricated with CRCA sheet steel of 1.6mm thick for frame work and covers, 2mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable Amp capacity extensible type TPN bus bars of high conductivity, DMC/SMC bus bar supports. entire panel shall have a common copper earth bar of size 25mm x 5mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Copper bus bars i/c providing following switch gears Incomer - 800A, Four Pole ACB, (Breaking capacity: Icw = Ics = Icu = 50 kA for 1 sec), MDO with MTX 1.5G, having Overload, Short-circuit & instantaneous protection with adjustable current & time delay settings, In-built neutral & earth fault protection, current metering through O-LED display, local fault annunciation through LED indication & pre-trip alarm - 1 No, 3 Phase LED Voltmeter, Cl 1(50 - 520 Vac) - 1 Nos 3 Phase LED Ammeter, Cl 1 - 1 Nos. CT Class 1 (800/5) - 3 Nos Voltmeter Selector Switch (VSS) - 1 No, Ammeter Selector Switch (ASS) - 1 No, RYB LED indicating Lamp - 1 Set On-off Indicating lamp - 1 Set 2A, 10 kA SP MCB for Protection - 4 Nos TPN Copper bus bars of minimum of 800Amps capacity 800A, 4Pole On-load Changeover switch (Manual)- 01 No Outgoing: 1) MCCB: 400A 4Pole, (TM), 36kA breaking capacity (Ics=100% Icu), with factory made Silver plated Copper spreading links & Rotary handle - 3 Nos. 2) MCCB: 250A 4Pole,(TM), 25kA breaking capacity (Ics=100% Icu), with with factory made Silver plated Copper spreading links & Rotary handle - 1 No 3) MCCB: 200A 4Pole, (TM), 25kA breaking capacity (Ics=100% Icu), with factory made Silver plated Copper spreading links & Rotary handle - 3 Nos. 4) MCCB: 100A 4Pole, (TM), 25kA breaking capacity (Ics=100% Icu), with factory made Silver plated Copper spreading links & Rotary handle - 6 Nos. All MCCBs should have variable thermal setting of 80-100% for overload protection. Make of all switchgear items L&T, ABB, Schneider, Siemens, Alstom, CGL. | — | — | — | 8,12,321 | |
| — | 15.00 | — | — | ||
| Earthing arrangement by providing earth electrode of GI pipe 50 mm dia (B class) 4.5 meter long with flange including 6 SWG GI earth wire from earth pipe to connecting point on switch board to distribution board/pole etc. asper site requirement including masonry enclosure as per Tech specification at annexure 'A' relevant ISS & IE rules and site requirements. A suitable CI/MS/RCC cover as approved by Rly. Representative, cover with locking arrangement shall be provided. | — | — | — | 35,100 | |
| — | 15.00 | — | — | ||
| Transportation of 2nd hand rail pole 36 feet long from the point of delivery to site of erection and erection of the same with cement concrete foundation ratio 1:3:6 as per drawing. No EL/T/5-76 (Only rail Pole will be supplied by the railway ). Note:- Transportation of Rail pole will be done by contractor and all charges will be paid by contractor. | — | — | — | 33,568.5 | |
| — | 4.00 | — | — | ||
| Supply, fixing, connection,testing and commissioning of Heat shrinkable cable end terminal joint kit 11KV 50/70/95sq.mm x3 core XLPE outdoor type complete with jointing materials model no. XSOS-12 Make- 3M, Raychem (TE Connectivity), Yamuna Densons, VIKCHEM. | — | — | — | 51,808 | |
| — | 23.00 | — | — | ||
| Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 120 sq.mm size of 3 core, XLPE aluminium conductor cable of 11 KV grade. Make- 3M, Raychem (TE Connectivity), Yamuna Densons, VIKCHEM. | — | — | — | 4,62,300 | |
| — | 1000.00 | — | — | ||
| "Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminium solid/stranded conforming to IS-7098 Part ll, Alu. alloy messenger of approved make in air with necessary material as per specification of 3x150 + 1x120 sq.mm. size for 11KV. Make- KEI, Rhino, V-Marc, Havells, Grandlay, RPG, Unicab, Polycab, Goldmedal." | — | — | — | 13,06,000 | |
| — | 35.00 | — | — | ||
| Supplying & fixing of aerial bunch cable accessories suspension clamp i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required size. | — | — | — | 14,945 | |
| — | 15.00 | — | — | ||
| Supplying &fixing of aerial bunch cable accessories tension clamp (dead end) i/c required attachment for single core cable of approved make in air with clamp, necessary material as per specification for required size. | — | — | — | 6,690 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
ACS01to11_new.pdf
ATTACHMENT
PDFformateundertaking.pdf
ATTACHMENT
ANX-VVA.pdf
ATTACHMENT
Up-GradationNKE.pdf
ATTACHMENT
Mandateform.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .