Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹66.7 L
EMD Value
₹1.3 L
Closing Date
2 Sept 2023, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Drinking Water and Sanitation Department
Ranaganath
Providing FHTC to 130 households of Bachenahatti & Boganapalya Habitation in Bachenahatti village in Bachenahatti Grama Panchayat/Providing FHTC to 26 households of Doddipalya Habitation in Bachenahatti village in Bachenahatti Grama Panchayat in Magadi taluk, Ramanagara District through SVS
RWSSD/2023-24/WS/WORK_INDENT3342
RWSSD/2023-24/WS/WORK_INDENT3342
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
RWSSD Division Office Ramanagaar
11 documents required · 11 mandatory
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To qualify for award of this contract, each Tenderer in its name should have in the last five years (2018-19 to 2022-23) satisfactorily completed (at least 90 % of the contract value), as prime contractor, at least One Water supply project of value not less than 50% of the estimated cost of amount put to tender Note: Successful completion certificate shall be submitted which ought to be issued by an officer not below the rank of Executive Engineer
To qualify for award of this contract, each Tenderer in its name should have in the last five years (2018-19 to 2022-23) Executed in any one Finacial Year,the minimum quantities of work (Usually 50% of the peak annual rate of construction) Note: the quantity could be in one or more contracts. However it has to be in one financial year
PRED/PWD CLASS III & ABOVE REGISTRATION LICENCE COPY MUST UPLOAD
Tenderer who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than total tender value.
To qualify for award of this contract, each Tenderer in its name should have in the last five years (2018-19 to 2022-23) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of One times the estimated cost of amount put to tender. Income Tax Returns Filed, Audited statement, Profit & Loss Statement, Balance Sheet certified by the ICAI registered Chartered Accountant must be submitted for the relevant years along with compulsory UDIN Id No. (Note Annual turnover for the past five/relevant financial years should be certified by an ICAI registered Chartered Accountant. The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number legible.)
liquid assets and /or availability of credit facilities of not less than 30% of the estimated cost of amount put to tender (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc & shall submit the certificate in the prescribed format only issued by Nationalised/Scheduled Bank for the particular work.As Per ANNEXURE-II
All Rates are excluding GST, Contractor should quote without GST & it will paid seperately
Litigation details of the bidder and tied firm with the details of the parties concerned and the amount involved should be furnished in Annexure-III.
The Bidder Should Declare Clearely wheather the bidder has not been black listed / banned / debarred by any Central/ State / UT Government Department or Undertaking / Organization should be furnished in Annexure-IV
The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Engineer in charge, not below the rank of Executive Engineer or equivalent.
Each of the documents uploaded to the e-portal should be self-attested by the contractor or an authorized representative in case of firm/company and notary certified.
The Copy of the PAN card with GSTIN Registration Certificate.
₹1,670
₹1.3 L
19 Aug 2023
19 Aug 2023
4 Sept 2023
28 Aug 2023
Providing FHTC to 130 households of Bachenahatti & Boganapalya Habitation in Bachenahatti village in Bachenahatti Grama Panchayat/Providing FHTC to 26 households of Doddipalya Habitation in Bachenahatti village in Bachenahatti Grama Panchayat in Magadi taluk, Ramanagara District through SVS
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for: CC Road Surface
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
Supply and delivery at site of brand new Electrofusion Coupler as per IS 2021-2022 with latest amendments 63 mm Dia
Supply and delivery at site of brand new Electrofusion Coupler as per IS 2021-2022 with latest amendments 75 mm Dia
Supply and delivery at site of brand new Electrofusion Coupler as per IS 2021-2022 with latest amendments 90 mm Dia
Supply and delivery at site of brand new Electrofusion TEE as per IS 2021-2022 with latest amendments 63 mm Dia
Supply and delivery at site of brand new Electrofusion TEE as per IS 2021-2022 with latest amendments 75 mm Dia
Supply and delivery at site of brand new Electrofusion TEE as per IS 2021-2022 with latest amendments 90 mm Dia
Supply and delivery at site of brand new Electrofusion Elbow as per IS 2021-2022 with latest amendments 63 mm Dia
Supply and delivery at site of brand new Electrofusion Elbow as per IS 2021-2022 with latest amendments 75 mm Dia
Supply and delivery at site of brand new Electrofusion Elbow as per IS 2021-2022 with latest amendments 90 mm Dia
Supply and delivery at site of brand new Electrofusion Reducer as per IS 2021-2022 with latest amendments 75X63 mm dia
Supply and delivery at site of brand new Electrofusion Reducer as per IS 2021-2022 with latest amendments 90X63 mm dia
Supply and delivery at site of brand new Compression MTA as per IS 2021-2022 with latest amendments 63 mm Dia
Supply and delivery at site of brand new Compression MTA as per IS 2021-2022 with latest amendments 75 mm Dia
Supply and delivery at site of brand new Compression MTA as per IS 2021-2022 with latest amendments 90 mm Dia
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 63 mm Dia
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 80 mm Dia
Providing Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80 mm Dia
Supplying and fixing kinetic AIR VALVE PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865 of gr...
Supplying and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, desi...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design,over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20(Grade), coa...
Providing and fixing 3 layers polypropylene random copolymer pipes confirming to IS 15801-2008 UV Stabilized and antimicrobial fusion welded having thermal stability of hot and cold water supply inclu...
PP Mail threaded brass adopter
PP Femail threaded brass adopter
Medium Duty GI pipe of 32mm dia
Approved make electro fusion saddle comply with BS EN 12201 - 3:2011, PN-12.5 rating and food grade raw material as per BS 6920 for effect on water quality intended for human consumption. Material of ...
Flow control Valve 10 LPM: Providing, & fixing Flow control valve using food grade materials SS 316 ball /1/2" [15mm] including cost of all materials, labour charges, HOM and testing complete as per o...
Providing and fixing brass bib cock of approved quality :15 mm nominal bore
Supply and Fixing of RCC demarcation stones of 30 cms x 15 cms and 90 cms deep using 1:2:4 cc and 6mm dia rods for verticals and stirrups and rendered smooth , including engraving letters "KWB and Arr...
Supply and fixing pot rest slab of size 0.45 x 0.30 x 0.20 meters with central dip for resting the pot including two line dressing and edges rounded and with all lead.
Supply and fixing of HDPE water meter box to protect the water meter of class 'B: multijet type of size 15 to 32mm including HDPE box with base dia 300mmxlid dia 200mmxheight 250mm with openable lid a...
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...
Providing and fixing ball valve(brass) of approved quality, high or low pressure with plastic float complete as per specification.20mm nominal bore
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 80 mm Dia
Labour charges for making flanged joints including cost of jointing materials comprising of rubber insertion, bolts and nuts including giving hydraulic test to the required pressure as per ISS with al...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cle...
Providing plastering in CM 1:3 proportion after removing old plaster of existing RCC over head tanks, including smooth finishing, minimum 2% of approved quality water proofing compound, curing, scaffo...
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to RCC structures like floor and walls of reservoirs, sewe, effluent and water treatment plants,...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Painting New Letter and Figures of any Shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“i) Hindi ( Matras commas and the l...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anch...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregat...
Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine agg...
Providing and laying in position Reinforced cement concrete for top slab of water tank over the staging above the ground level. The granite/trap/ basalt crushed graded coarse aggregates and fine aggre...
Providing T.M.T steel reinforcement for R.C.C work inclding Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work sp...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80 mm Dia
Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends:[WS&UW CSR 2021-22, Vol :V, Chapter No: 8, Item No:24, SOR CODE:B073] 80 X 90O
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fore...
Painting New Letter and Figures of any Shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“i) Hindi ( Matras commas and the l...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtr. intervals for a height of 75...
Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtr. intervals for a height of 75...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
49308-KW-3.docx
Tender Document • 0.27 MB
Notn-02.pdf
Others - Notification • 2.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .