SPL REPAIR TO INTERNAL ROADS IN THE AREA OF AGE B/R-IV UNDER GE(SOUTH) MEEREUT CANTT

Amount

Material and labour for repair to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth and making good by filling in screened & graded road metal, watering and well ramminng (including supplly of road metal) and making goodby applying tack coat at 5 kg per 10sqm putting in premix bitumenous macadam, well rammed and sealed with binder 9.8Kg per sqm , blinded with 0.09 cum off stone chipping, 6.3mm size and again will rammed (including supply or premix macadam,binder and chippings) depth of potholles exc 30mm complete all as specified and directed.

Material and labour for premix bituminous macadam mixed with paving bitumen @ 4% binder( Viscosity grade VG-10 ) content any penetration laid / rolled and compacted to required gradient and camber (consolidated thickness n exc 75mm) with 8 to 10 ton power roller complete all as specified and directed.

Material and labour preparing surfaces by brushing in black top with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt, aggregates etc and applying evenly a priming/tack coat with bituminous primer at the rate 05 Kg per 10 Sqm complete all as specified and directed.

Material and labour for bituminous premixed semi dense asphaltic concrete 30mm thick (consolidated thickness) with 5.5% of binder contents paving bitumen (VG-10) viscosity grade by weight of total mixed in hot mix plant, transported to site on tippers and laid with mechanical paver and rolled to a uniform smooth surface with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed.

Supply and fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions, complete al as specified and directed.

Material and labour for cleaning the road surface of dirt, seal oil/grease and foreign material etc and applying 2.50 mm thick road marking strips (rectro reflective) of white/yellow colour using Hot Themoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profiles shoe, glass beads dispenser, propane tank heater and profile shoe heater driven by experienced operator on road surfaces complete all as specified and directed make of paint STP or Equvaliant as approved by GE.

Supply and fix in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomere 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

Supply and fix in repairs Traffix convex mirrors body colour black in polycabonate/stainless steel with dome size in 30 inches and diameter in 36 with pole as suitable height for ground requirement and excavatioin , PCC and etc as directed by GE.

Material and labour for 150mm reinforced concrete pipes, class NP2, laid and jointed complete with collors complete all as specified and directed.

Demolition of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs aprons, etc (each layer) complete all as specified and directed.

Material and labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

Material and labour 75mm thick cement concrete 1:4:8 type D-2 using (40mm graded stone agg) as in sub base complete all as specified and directed.

Material and labour 80mm thick PCC tile (interlocking type) with grey cement and pigment over 25mm thiick sand cushioning, interlocking tiles jointed fillled with sand and compacted with mechanicall plate vibrator complete all as specified and directed. (sand for cushoing will be measured & paid separately).

Material and labour sand for cushioning, interlocking tiles joint to be filllled with sand, incluidng spreading and levelling in layers n.exc 25mm thick complete all as specified and directed.

Supply and fix pre-cast cement concrete block mansonry 1:2:4 type B-1 (using 20mm graded stone aggregates) with solid blocks exc 10 cm in width and setting in cement mortaar 1:6 complete all as specified and directed.

Supply and fix in repairs yellow and black plastic speed bump made up of ABS materials to highly reflective reflector moulled in EMMA material weled with ABS base plate through ultrasonic wwelding processes of size 350mm length and width of 263 mm with working width of 250mm, height 53mm and weight appx 1200gram complete all as specified and directed.

SA construction co.

Arun Construction Co.

Punit Jain

G. K. CONSTRUCTION