SPECIAL REPAIR TO BUILDING NO P-59 OTM ACCN AT TATTOO GROUND MIL STN UNDER GE 970 EWS.

Amount

Dismantling plain or corrugated steel sheeting of any gauge & thickness including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/blankets of any thickness and type, complete all as specified and directed.

M&L for hangers 6mm dia GI (upto 1200mm length) adjusting level, fixed to roof slabs by means of ceilling cleats made out of GI flat 40mm x 3mm size, 60mm long and expansion hold fasteners 12.5mm dia, 40mm long and anodised aluminium snap grid frame work of size 605mm x 605mm as in false ceiling and including 4mm thick Non asbestos fibre cement building boards, fixed or laid/inserted to timber/GI/Aluminium framework with screws and preparation of surfaces and appliying two coats of oil bound distemper, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description, not otherwise provided for, complete all as specified and directed.

M&L for mild steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections, post) including distance pieces, cleats etc, confirming to Fe-290 Gde E-165, complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings etc, with ends of bars shoulders and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work, confirming to Fe-290 Gde E-165, complete all as specified and directed.

S&F rolled mild steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, confirming to Fe 410-W (Grade E-250) Quality-B, completed all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of old painted steel surfaces and applying one coat of sythetic enamel paint, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles, completed all as specified and directed.

M&L for brick work with sub class "B" bricks straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

All as per ser item No 16.00 here-in-above but except bricks.

Demolition of cement concrete (un-reinforced) in any description and any position, complete all as specified and directed by the Engineer-in- Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding/backing and removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on stone masonary surfaces or fair faces of brick work, finished the surface even and fair to receive tiles, complete all as specified and directed.

M&L for non skid ceramic colored tiles 7 to 8mm thick (square/retangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors, set and jointed in neat cement slurry and pointed in colored cement to match the shade of tiles, complete all as specified and directed.

M&L for non skid ceramic colored tiles 7 to 8mm thick (square/retangular), area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

All as per ser item No 23.00 here-in-above but on vertical surfaces/Skirting.

M&L for glazed ceramic colored tiles of size 350mm x 450mm x 7mm thick, as on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for Johnson endura paving colored tiles of size 300mm x 300mm x 10mm thick as in floors or on vertical surfaces, laid over and including 15mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for marble work 18 to 20mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra etc, complete all as specified and directed.

Edge moulding to 18 -20mm thick stone of counters vanities etc including machine polishing to edge to give high gloss finish, complete all as specified and directed.

M&L for machine cut kota stone slab flooring, 20-25mm thick, laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

All as per Ser item No 30.00 here-in-above but on verticle surfaces.

M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate) as in floors or sub base of floors, complete all as specified and directed.

Taking down cement plaster from brick or concrete or stone surfaces including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on ceiling surfaces, finished the surface even and fair without using extra cement, complete all as specified and directed.

M&L for preparation of wall surfaces and applying one coat (2-3mm thick) wall care putty, complete all as specified and directed.

M&L for preparation of new palstered surfaces of walls and applying two coats of oil bound distemper over a coat of wall primer, complete all as specified and directed.

M&L for preparation of new wall surfaces and applying two or more coats (@ 1.67 ltr/10 Sqm) acrylic smooth exterior paint of required shade over and including priming coat of exterior primer (@ 2.20 Kg/10 Sqm), complete all as specified and directed. Note:- Shade of paint shall be decided by Engr-in-Charge.

M&L for preparation of new palstered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each including cutting holes for taking out hold fast and making good disturbed surface with existing surface, complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each with shutter including cutting holes for taking out hold fast and making good disturbed surface with existing surface, complete all as specified and directed.

Taking down shutter and refixing in same opeing of any description, area of shutter exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

S&F Box type steel window (Factory made) outer frame made out ERW tube 'P' section 65mm x 45mm x 25mm and shutters of ERW tube 'P' section 50mm x 35mm x 20mm openable (double) shutter with glazed openable shutter on external side and wire gauzed openable shutters on internal side with steel pintal hinges, steel handle 100mm long, mild steel tower bolt 02 Nos on each shutter, stopper of 'Z' section and its locking arrangement at mild steel hook and eye including 0.36mm dia nominal dia of stainless steel wire cloth average width of aperature 1.40mm dia and 3mm thick sheet glass, complete all as specified and directed. Notes:- The quoted rates shall be deemed included with the following. (a) Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat tar on the ends of steel frame in contact with bricks/concrete surface. (b) 04 Nos MS steel Lugs of 20 x 5mm MS flat 20cm long over all welded to frames. (c) PCC block for embedding lugs. (d) For the pupose of measurement & payment double shutter with frame shall be considered as one unit.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening at site, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site, complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel, size 100mm, complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel, size 75mm, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed & skeleton shutters for door open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. sizes of members of shuttered as specified in SSR Part- I Section -8 Clause 8.20 (a), complete all as specified and directed.

S&F factory made second class hard wood, 35mm thick plain framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and fixed at site, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10cm width and girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation old wood and wood based materials of any description not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F 150mm size hasp and stapple aluminium anodised with fixing bolts and sliding bolt of extruded section, complete all as specified and directed.

S&F extruded aluminium alloy 'D' type handles, anodised 75mm long ISI marked, complete all as specified and directed.

S&F extruded aluminium alloy 'D' type handles, anodised 150mm long ISI marked, complete all as specified and directed.

S&F aluminium anodised, barrel tower bolt of extruded section, 150mm length of bolt.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section, complete all as specified and directed.

S&F 300mm size mild steel brass ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in filling for holdfasts, complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

M&L for 15mm bore GI water tube, medium grade with all fittings and fixtures, complete to walls and ceiling or laid in floors, complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

M&L for 20mm bore GI water tube, medium grade with all fittings and fixtures, complete to walls and ceiling or laid in floors, complete all as specified and directed.

Dismantling water tank of capacity exc 500 ltrs but not exc 1000 ltrs and removing from site including necessary connected accessories, complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tank (three layered) cylindrical vertical with closed top, hoisted and fixed in position with connecting, complete all as specified and directed by Engr-in-charge.

S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball (minimum weight 210 gram), screwed for 20mm iron pipe and fixed, complete all as specified and directed by Engr-in-charge.

S&F in repalcement chromium plated tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, complete all as specified and directed.

S&F in repalcement vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests and connection to trap and including 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and making good distrubed surfaces, complete all as specified and directed.

S&F in repalcement vitreous china white wash down water closet pan (pedestal pattern), white (ETWC) with plastic water closet seat cover and 'P' or 'S' trap including connection to drain or outgoing pipe and to PVC flush pipe, antisyphonic pipe, 10 Ltrs capacity PVC flushing cistern low level, valve less, symphonic action type complete with inlet ball valve including brackets and CP jet sprey with 15mm dia size and 1 mtr long flexible tube and including MS chromium plated hinging device, complete all as specified and directed.

S&F in replacement vetreous china wash hand basin, white, flat back of size 600mm x 480mm including brackets & including cutting for and pinning in ends of brackets and waste coupling of PTMT of 32mm size (half or full threaded) (Minimum weight 45 gms), complete all as specified and directed.

S&F in replacement CP soap dish of size 160mm x 160mm x 90mm, fixed with chromium plated brass screws, complete all as specified and directed.

S&F 15mm size PVC connection with PTMT nuts at both side, length 450mm long, complete all as specified and directed.

S&F in replacement low density PVC waste pipe of 32mm bore, 600mm long, complete all as specified and directed.

S&F in repalcement 15mm bore bib tap, long nose/ body, cast copper alloy CP fancy type with capstan head, screwed down, screwed for brass, weight not less than 450 gms, complete all as specified and directed.

S&F in replacement 15mm bore stop/angle cock, cast copper alloy CP, fancy type, high presure with capstan head handle, weight not less than 450 gms, screwed both ends for iron pipe of for unions, complete all as specified and directed.

S&F in replacement brass CP wall or basin mixer for mixing hot & cold water, screwed down for 15mm bore iron pipe and fixed, complete all as specified and directed.

S&F in replacement 20mm bore Gun-metal, globe or gate valve, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified and directed.

Taking up or down 75/100mm bore CI/PVC pipes (incl all fittings), with spigot and socket ends and lead joints incl burning out joints and removing, complete all as specified and directed.

S&F 110mm bore UPVC, SWR pipes, single socketed in any length with rubber ring joint, laid in trenches or in floor, complete all as specified and directed.

All as per item no 82.00 above but 75mm bore pipe.

S&F 110mm bore UPVC, SWR pipes, single socketed in any length with rubber ring joint, fixed to wall with suitable mild steel clamps, complete all as specified and directed

All as per Ser item No 84.00 above but 75mm bore pipe.

S&F UPVC bends (any radius) of 110mm bore.

S&F UPVC bends (any radius) of 75mm bore.

S&F 110mm bore UPVC SWR branch pieces, single (equal or unequal), Single 'Y', complete all as specified and directed .

All as per item no 88.00 above but 75mm bore.

S&F 110mm bore UPVC trap 'P' or 'S' , complete all as specified and as directed .

S&F 75mm bore UPVC vent cowl.

S&F in replacement PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed.

S&F in replacement grating doom 100mm dia of PTMT (Minimum weight 25 gms), complete all as specified and directed.

S&F in replacement PTMT grating doom with or without waste hole 125mm dia, complete all as specified and directed.

S&F in replacement 25mm dia 1.6mm thick aluminium powered coated conduit decorated type curtain rod including pair of MS bracket, finials (latto) at ends including fixing on wall with screws, complete all as specified and directed.

S&F in replacement sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in replacement CP shower rose with or without swivel joints of any size including fixing to 15mm bore GI pipes or unions etc, complete all as specifiea and directed.

M&L for lagging to 15mm bore GI pipes used in internal water supply or plumbing all round with 40mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/Cum, confirming to IS-9842, provided with chicken mesh wire netting 25 gauge, 20mm mesh and with with 0.01mm aluminium foil, complete all as specified and directed.

M&L for lagging to 20mm bore GI pipes used in internal water supply or plumbing all round with 40mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/Cum, confirming to IS-9842, provided with chicken mesh wire netting 25 gauge, 20mm mesh and with with 0.01mm aluminium foil, complete all as specified and directed.

M&L for preparation of surfaces of sunken slab and applying 15mm thick cement plaster in CM 1:3 with integral water proofing compound on floor & side wall. The surface shall be cured and allowed to dry then applying Epoxy Resin coating Polymer modified cementation coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturers instructions on floor as well as on side wall and sunken floor shall be filled with graded cinder concrete upto top level to receive top flooring, complete all as specified and directed.

M&L for 50mm thick sand cushioning for laying interlocking paver blocks incl watering and consolidation as required, complete all as specified and directed.

M&L for 60mm thick interlocking paver block, made with electro vibro technology with rubber/ PVC moulded of any shape and size, confirming to IS-15658-2006 of M-35 Grade with grey cement and pigment, laid over sand cusioning, complete all as specified and directed by Engineer in Charge. Note:- Sand cusioning shall be measured and paid separetly.

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in floors, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection etc, laid in alternate ways and including joints filling with sealing compound Grade "A", finished the surface even and smooth without using extra cement, complete all as specified and directed.

S&F 0.36mm nominal dia of stainless steel wire cloth, average width of aperature 1.40mm and fixed with SS wire staples etc, completed all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc, complete all as specified and directed.

M&L for second class soft wood clean sawn, as in framed work and scantlings, complete all as specified and directed by the Engineer-in-Charge.

Dismantling timber scantlings 40 Sqcm and over in section, in any position (Framed work), complete all as specified and directed by the Engineer-in-Charge.

M&L for rough cast plastering including 15mm thick rendering in CM 1:3, complete as specifed in SSR Part-I clause 14.22 as given. Notes : Rough cast finish : After applying under coat of cement mortar 1:3 not less than 10mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate which is generally of size between 6 to 12mm depending on texture required mixed with coarse sand and cement in the ratio 1:1 shall be applied.

Taking down carefully copper/ aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches, ceiling rose, pendents, regulators, socket, lamp holders etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good distrubed surface with existing surface, complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm copper conductor (multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade wiring in PVC conduit of suitable size with all fittings accessories and including PVC insulated electric cable 1100 volts 1.5 sqmm (multi stranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6mm thick MS sheet concealed on wall or on surface as per site requirement and making good distrubed surface of wall, covered with 3 mm thick plastic laminated sheet for one light point/ fan point/ bell point, complete all as specified and directed.

All as per Ser item No 115.00 above but for one 3 pin 5 Amp socket outlet on the same board with other switches.

All as per Ser item No 115.00 above but for one 3 pin 5 Amp socket outlet on the independent board.

All as per Ser item No 115.00 above, but for one socket outlet 15 Amp on the independent board with 2.5 sqmm copper conductor multistranded PVC insulated and sheathed electric cable 1100 Volt grade including PVC insulated and unsheathed electric cable 1100 volt 2.5 Sqmm copper stranded conductor as continious earth wire connected to common earth dolly, complete all as specified and directed.

S&F ceiling rose 3 terminal, size 65mm x 50mm, surface bakelite, complete all specified and directed.

S&F switch piano, flush type, 5 Amp, one way, complete all specified and directed.

S&F stepped type electronic fan regulator, flush type, complete all specified and directed.

S&F switch socket combination outlet 5 and 15 Amp, 5 in 1, flush type, complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 Amps, flush type, complete all as specified and directed.

S&F switch socket combination outlet 2 in 1, 3 pin, 5 Amps, flush type, complete all as specified and directed.

S&F in replacement sheet metal enclosure, factory made, double door shutter type for DB SPN, 240 Volts, 8 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and directed.

S&F in replacement sheet metal enclosure, factory made, double door shutter type for DB SPN, 240 Volts, 12 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and directed.

S&F in replacement sheet metal enclosure, factory made, double door shutter, modular type for DB VTPN, 415 Volts, 4 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and directed.

S&F in replacement MCCB 4 pole 160 Amp, 36 KA breaking capacity with adjustable thermal setting and adjustable magnetic setting 430 V, 50 Hz AC supply, complete all as specified and directed.

S&F MCB SPN 63 Amps, 230 Volts 'C' curve, 50 Hz, AC, 10 KA, complete all as specified and directed.

S&F MCB SPN 40 Amps, 230 Volts 'C' curve, 50 Hz, AC, 10 KA, complete all as specified and directed.

S&F 240 Volt, 10 KA, 'B' curve MCB of single poles and current carrying capacity 40 Amps, complete all as specified and directed.

S&F MCB SP 06 to 32 Amps, 230 volts 'B' curve, 50 Hz, AC, 10 KA, complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected with GI wire 4mm dia by means of lugs, bolts, nuts, check nuts, washers of galvanised iron or steel, GI protection pipe of 15mm bore, light grade including earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, 20mm bore GI watering pipe medium grade, GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B-1 duly reinforced with TMT bars 8mm dia at the rate of 150mm center to centre spacing in both way with suitable lifting handle and pit/ chamber in PCC 1:3:6 type C-1, for pit cover and connecting to main switch board / Main DB’s including testing on completion, complete all as shown in electric plate No-5 of SSR part-I and directed.

M&L for sub main wiring using FRLSH insulated unsheathed, multistandard coper conductor FR PVC cable 2 runs of size 6 Sqmm for phase and neutral and 1x 6 Sqmm for earthing drawn through rigid PVC conduit of suitable size, fixed on wall/ground/ceiling etc, complete all as specified and directed. Notes :- (a) Phase should be red/yellow/blue, neutral should be black and earthing wire should be green in colour. (b) Two runs of cable for phase/neutral and one run of cable for earth including conduit will be measured and padid as one unit length.

S&F in replacement LED lights fitting 1x20W, 220V, AC decorative box type with driver including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F in replacement LED bldg security light fitting 60 Watt, 230 Volt, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and including GI bracket of 40mm bore pipe medium grade, 1.2 mtr long, bent to shape, fixed with MS clamps, nuts and bolts of suitable, complete all as specified and directed.

S&F in replacement lamp holder, PVC/polycarbonate type with back plate, suitable for batten fittings etc, complete all as specified and directed.

S&F in replacement LED 9 Watt bulb, complete all as specified and directed.

Supply & laying XLPE insulated, sheathed, armoured, heavy duty LT 1100 Volts grade power cable with aluminium conductor, cross sectional area 50 Sqmm 3.5 Core, laid in trenches or fixed in poles/walls through pipe with suitable clamps including taking out the existing UNSV cable etc, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation, laying cables and getting out in hard / dense soil, complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm thick, complete all as specified and directed.

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point, complete all as specified and directed.

M&L for dry river sand, laid in trenches for cable protection, as 15cm thick below the cable and 8cm thick above the cable after laying, complete all as specified and directed. Note :- Punned thickness of sand shall be measured & paid.

M&L for sub class 'B' brick covering protection to the eletric cable, laid dry, flat, transversally along the length of cable on sand cushioning with width equal to length of brick, complete all as specified and directed.

M&L for cutting chases, pinning in marking good to facing where required in brick wall, stone concrete block or slab, walls and pointing in cement mortar 1:3 to ends or edges of landings, steps, sunsheds, shelves, lintels etc and cutting chases for required size for concelaed conduit and marking good, cutting exc 20cm grith etc, complete all as specified and directed.

S&F steel ventilators with centre hung shutter including hinges, steel peg stay, complete all as specified and directed.

M/S BHAT AND CO

SOFI CONSTRUCTIONS

M/S B A Traders

M/S Tajamul Ah Buchh

JK BUILDERS AND ENGINEERS

M/S Manzoor and Co

M/s Lal Enterprises

HAJI ZAHOOR HUSSAIN GANIE

M/s Muzaffar Ahmad Mir