SITC of Air conditioning Machines

Amount

SITC of 7.5 TR wireless concealed type Split air conditioner unit with R-410A/R-22 refrigerant along with charging the required amount, having nominal cooling capacity 90000 BTU/Hr having multiple rotary/scroll compressor as per OEM standard and multiple IDU as per OEM standard with rated power supply 1-Phase, 230V, 50 Hz for IDU and 1 no. ODU with rated power supply 3-Phase,400V, 50Hz with air discharge not less than 1000 cfm/IDU.( Make: Carrier/Hitachi/Mitsubishi-Heavy).

SITC of 2.0 TR wireless concealed type Split air conditioner unit with R-410A refrigerant along with charging the required amount, having nominal cooling capacity 24000 BTU/Hr having rotary compressor as per OEM standard and IDU as per OEM standard with rated power supply 1-Phase, 230V, 50 Hz for IDU and ODU with air discharge not less than 800 cfm/IDU.( Make: Daikin/Hitachi/Mitsubishi-Heavy).

REFRIGERANT PIPING:- Installation & commissioning of hard/ soft copper refrigerant piping, complete with fittings Elbows, Bends, supporting arrangement on walls for concealed split A.C.

Gas Line CU, pipe 5/8" for 7.5 TR. Concealed Split A.C. with 5/8". thick nitrile tube insulation.

Liquid Line CU, pipe 3/8" for 7.5 & 2.0 TR. Concealed split A.C. with 5/8" thick nitrile tube insulation.

Gas Line CU, pipe 3/4" for 2.0 TR. Concealed Split A.C. with 3/4". thick nitrile tube insulation.

Supply & drawing 6 core 2.5 sq mm unarmoured copper control cable between indoor & outdoor unit of concealed split Acs (Make:KEI/POLYCAB/FINOLEX)

DRAIN PIPING Providing& fixing PVC piping compete with fittings, supports as per specifications duly insulated with 9mm. Thick nitrile rubber tube insulation.

32 mm. Dia

Charges for scaffolding arrangements for 5 storey building incl. lifting indoor & outdoor unit.

Supply & fixing flexible double canvass connection for IDU of concealed Split Acs.

S&F Al continous powder coated grill without VCD.(Make: Dynacraft/Premier/Ravister)

Charges for fabrication of trap door made of Aluminium channel and Aluminium composite panel board.

Charges for fabrication of drop ceiling and painting. The drop ceiling should be made of 12.5mm thick Gypsum board incl. GI perimeterchannel of 0.55mm flush (having two flangesand web of 20mm,30mmand 27mm respectively) along with perimeter of ceiling with GI intermediate channel of 0.9 mm thick(of size 45mm x 15mm) placed at 750mm centre with GI ceiling angle( of size 25mm x 10mm and 0.55 mm thick) fixed to the ceiling with GI cleat and steel expansion fastner ceiling section (with 0.55 mm thick of size 51.5 mm x 26mm) fixed to the intermediate channelswith the help of connection clipperpendicular to the intermidiate channel of 300mm centre to centre 12.5mm thick gypsum plastered board are to be fittedunder ceiling section as above by machine screws.The boards are to be joinedand finished with joining compound, paper tapes and application of top coat etc as per direction of E.I.C.

Charges for fabrication of MS structure for installing the ODUs, to be fabricated from 6mm thick MS angle measuring 45x45 mm for constructing base and 4 nos 50mmx50mmx6mm angle iron leg for grouting on RCC roof incl. Making holes and filling with concrete along with painting the MS structure by two coats approved paint over 01 coat of R.O primer.

ELECTRIC REFRIGERATION

YOUNG ENGINEERING ENTERPRISE