CA NO. CWE BLY / GE(E) / 51 OF 2022-23 SPL REPAIR TO BLDG NO P-11 OF FD WKSP COY, PROVN OF MT SHED OF HQ INF BDE AND ADDN/ALTN OF SECURITY WALL WITH CONCERTINA COIL AT COMPO ASC PL AT SHAHJAHANPUR CANTT UNDER GE (E) BAREILLY

Amount

Dismantling asbestos cement (corugated or semicorrugated etc ) sheets, in roof covering complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling ceiling board (plywood etc) any thickness, including cover fillets and frame complete all as specified and directed.

S&F 6 mm thick E Board non asbestos fibre cement building board fixed/inserted to timber/GI/Aluminium frame work placed in false ceiling grid made of Anodised aluminium snap grid size 605x605mm frame work for false ceiling and as per specification and drawing as in false ceiling all as specified, including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed Note Cost of Scafolding upto height as required at site for fixing of false ceiling included in quoted rate.

Taking down chowkat with shutter not exc 1.5 sq.m each etc complete all as specified and directed.

S & F for powder coated composite window with double shutter for glazed and gauzed side with pressed steel frame including stainless steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and 5 mm thick glass including grill of 10mm square bar @10mm c/c fixed with flat iron frame of 20x5 mm and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 complete all as specified and directed and shown on Drg No TD-88 sh 1/2 and 2/2 Note :- Measurements shall be taken and paid compositely i.e. frame, glazed and gauged etc.

S&F steel ventilators for industrial buildings, fixed type, with glazing bars and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 complete all as specified and directed , complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm below or above ground level.

M&l 100 mm thick PCC 1:2:4, Type B2, using 40 mm graded aggregate as in paving/path finished fair and even complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M & L applying two coats of distemper oil emulssion white or tinted on newly plastered wall surfaces including preparation and clearance of surfaces to distempering, complete all as specified and directed.

M & L complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulssion, white or tinted including clearcolle on surfaces for prepatory to distempering, complete all as specified and directed

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed

M & L for complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed.

S&F in repair sliding door gate of size 3m x 4m including bottom & top rail with both side supporting MS column door shutter weld with anlge iron of 65 x 65 x 6 mm with three horizontal support and two coloum support to each shutter bottom and top rail be storng enough to carry weight of shutter including rollers, hadle, sliding bolt, 0.63 mm th S Sheet to cover door alongwith top portion covered with fibre sheet transparent of size 3m x 2m with supporting frame of angle iron 50x50x6mm complete all as specified including primer and two coat if synthetic enamel paint complete all as specified and directed

S&F in repair steel rolling shutters made of 1.00mm thick lath, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; errected in position as indicated, but gear operated type with bevel gear box and crank handle complete push pull or manual type complete all as specified and directed.

S&F for Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed

M&L appoxy polyurethene flooring 4 mm thick including surface cleaning appoxy primer appoxy levelling screed and top of coat of appoxy self levelling with P.U. top coat over existing surface including minor up and down / crakes willl be the part of this item complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint on old decorated steel surfaces exc 10 cm width or girth including preparation of surfaces , complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening complete all as specified and directed as per specification & drawing

S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100 mm size cadmium coated Stainless steel butt hinges medium weight fixed to frame complete all as specified and directed.

S&F 150mm size aluminium handles,cast type,anodised all as directed.

S&F 150 mm long,aluminium,anodised, barrel tower bolts of extruded section all as described.

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia pillar tap , 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including Stainless steel brackets complete all as specified and directed.

S&F in repairs 15 mm dia bib tap fancy type chromium plated with cast copper alloy with crutch & butterfly handle screws down for brass ferrul and fixed complete all as specified and directed.

S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified and directed

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed

S&F in repair chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed.

S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed.

S&F in repairs, PVC low level flushing cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .

S&F in repairs gun metal globe or gate valve with iron wheel screwed bothedns for iron pipe of 15 mm dia complete all as specified and directed.

S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified and directed

S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed

S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).

S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 complete all as specified and directed.

M&L 3.0 mm thick figured glass, pin headed type and glazing with oil putty/ steel pins in squares n. exc 0.5sqm each pane complate all as specified and directed.

S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I Incl.dismentling of existing tank complate all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

M & L 9 to 10 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specfied and directed.complete all as specified and directed.

S&F in repairs vitreous china urinals,flat back of size 465mmX355mmX265mm,white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches, RCC Coping etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, and formwork complete all as specified and directed

S&F rolled mild steel in section, angle or tie sections fixed independently without connecting plates etc (cut to ordinary length i.e. within 20 mm of the length indicated) as in posts and struts in fencing including cutting tops to shape as directed , drilling holes , notching for wire etc ,flat iron fillets ( for securing wire etc ) including all necessary drilling , bolting or riveting, etc and similar work , MS flat iron of any size complete all as specified and directed

M&L Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair galvanised, 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, complete all as specified and directed. ( each line wire to be measured).

M&L for punched tape concertina coil made out of low carbon strip dully electro galvanised two protect dia of wire not less than 2.59 mm dia of coil 450mm(appx) when closed with all necessary clips & RBT wire (each coil contains 100 RM of wire) to connect with angle or brackets etc with all accessories complete all as specified and directed (one coil opened & spread in length of 5m)

M&L brick work with fly ash ' B' bricks of old size bricks having comprise n less than 75 4/4 , straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. .

M&L broken glass coping on top of walls set in cement mortar 1:3 complete all as specified and directed. .

M&L applying two coats of exterior emulsion paint over and including 1mm thick wall care putty and one coat of primer including preparation of surfaces, complete all as specified and directed

Dismentling wrought iron or mild steel work of such as grill/roof purlin etc not otherwise provided for complete all as specified and directed

Excavation in trenches n.exc 1.5m wide and not exc 1.5 m depth for foundation etc or for shafts, well cess pits manholes, pier holes, laying of cable etc and gettiong out in soft/loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation of mass concrete complete all as specified and directed

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Spreading,levelling,watering and well ramming the earth filling under floor not exc. 25cm thick in layers complete all as specified and directed.

M & L hardcore of broken stone or boulders of gauge exc.63mm but not exc 100mm ,deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specifed and as directed

Returning , filling in including spreading, leveling, watering and well ramming in laying not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

M&L 100 mm thick PCC 1:2:4 type B1 using 20 mm graded aggregate as in flooring and finished the surface even and smooth without using extra cement complete all as specifed and as directed

Excavating in post holes ( or similar hoels ) each n exc 0.5 cum getting out, returining, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm , watering, and removing surplus soil to a distance n exc 50 mtr complete all as specified and directed.

M&L plain cement concrete in foundation type C-2, 1:3:6 ( 40 mm gde stone aggregate) as in filling and mass concrete complete all as specified and directed.

S&F mild steel rolled section conforming to Fe-410 (Gde E-250), as in main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats and other connecting plates etc. complete all as specified and directed.

S&F rolled mild steel in plates (plain or chequerred) channel, square cut or notched (Ordinary and counter shunk) forming holes, without any attachment of Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 of Fe-410-W (Gde-E-250) quality 'A' complete all as specified and directed.

M & L 75mm thick PCC 1:3:6 type C-2 as in sub base, Floors, Paving, plinth protection, finished even and fair complete complete all as specified and directed

M&L for forming construction joint 30mm deep X 10mm wide filled with sealing compound Grade 'A', complete all as specified and directed.

E/M PORTION Taking down carefully, old unserviceable aluminium point wiring (light, fan, socket, bell, buzzer or power) complete including unserviceable fittings such as switch, socket, ceiling rose, lamp holder, light fittings, bakelite sheet, terminal box, etc. and making good to disturbed surfaces of wall/floor and ceiling etc. and removal, complete all as specified and as directed by E-In-C Note:- Existing CFL/FTL fittings are not to be removed and rates are inclusive of taking down & refixing of existing CFL/FTL fitting at any location as directed by Engg-In-Charge. Disturbed surfaces shall be made good by plastering and applying two coats of white wash or OBD to match the existing surface finishes.

Taking down carefully by unscrewing from DB box MCB SP/SPN/TPN of sizes & any capacity complete all as specified and directed.

Taking down carefully sub main wiring of any size complete all as specified and directed.

S&F Point wiring in concealed PVC conduit using stranded copper conductor cable of size 1.5 Sqmm, PVC insulated unsheathed FRLS cable complete with all fittings and accessories but using existing sunken cast iron or pressed steel terminal box for mounting of switches, sockets, fan regulators etc but providing new cover 3mm thick laminated,(Hylem) sheet top cover fastened with chromium plated screws and 1.5 Sqmm PVC insulated stranded copper conductor FRLS cable as continues earth wire connected to common earth dolly all as directed and as specified for the following :- NOTE: for wiring in ceiling portion conduit shall be fixed with surface of ceiling/with trusses etc.

One light/fan point controlled by one switch complete all as specified and directed.

One 3-pin socket outlet 5 Amp on independent board complete all as specified and directed.

One 3 pin socket outlet 5 Amp on same board complete all as specified and directed.

All per Srl item No. 88 here-in-before, but with 2.5 Sqmm copper conductor cable complete all as specified for One 3 pin socket outlet 15 Amp on independent board complete all as specified and directed.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as an earth continuity conductor complete all as specified and directed.

S &F switch piano flush type polycarbonate SP one way 5 Amps complete all as specified and directed.

S &F switch piano flush type polycarbonate SP one way 5 Amps complete all as specified and directed.

S&F socket out let 3 pin 5 Amp multipurpose, flush type 240 volt complete all as specified and directed.

S&F socket out let 3 pin 15 Amp multipurpose, flush type 240 volt complete all as specified and directed.

S&F ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete all as specified and directed.

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for pendent fitting and including LED 9Watt Lamp of complete all as specified and directed.

S&F MCB SP 6 to 32 Amps 10 KA C series complete all as specified and directed.

Supply and fix MCB SPN 32 to 40 Amps complete all as specified and directed.

Supply and fix in replacement MCB DB Single pole and neutral 8 way sheet steel phM&L OFF LOAD change over switch 415V in sheet metal enclosures 3 pole of capacity 200 Amps complete all as specified and direcrted.

Supply and fix in replacement MCB DB Single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar with IP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and direcrted.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete with 1.5 sqmm complete all as specified and directed.

Taking down old unsv buildig security light fitting, Supply and fixing new energy saving LED light fitting 35 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and directed

Supply and fixing LED luminaire 600 mm x 600 mm 40 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete all as specified and directed

S & F in replacement LED flood light 70 W 230 V AC outdoor type with thermal management in multiple optics and equipped with IP-66 protection with impact and corrosion resistant complete all as specified and directed

M&l for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 3.15mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 5 of SSR-2009 (Part-I).

Taking down and refixing after repair & re-winding and painting of unserviceable of Ceiling fan/exhaust fan of any size any capacity such as replacement of bearing, shaft, bushes,capacitor, blade, locking pins, louvers ,nut bolt and washers complete & Spray painting with synthetic enamelled paint of approved colour (as approved of Engr-In-Charge) with mounting bracket and grouting the foundation bolt in wall and making connection complete all as specified and directed

Supply and laying PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100V grade, cross-sectional area 16 sqmm 4 core complete all as specified and directed

Material and labour for river fine sand, washed and screened dry for cushioning to underground cable in trenches below and around underground cable including spreading and leveling punning complete all as specified and directed

M&L for laying bricks, sub class 'B' for protection of cable, in trenches, laid in dry flat across the cable with length of whole bricks complete all as specified and directed.

MCCB 4 Pole .415 V. fixed type 63 Amps with breaking capacity 16 KA complete all as specified and directed

S&F sheet metal TPN distribution board vertical type doubl door with insulated bus bar arrangement IP 43 protection 4 way 415 V complete all as specified and directed. Note : Tenderers may note that amount of credit Rs. 1,18,715.00 will be deducted from the total amount arrived, at the time of acceptance of tender.

M/S DEEN ENTERPRISES

Builders Harpal

M/S ARORA ENTERPRISES

TEAM ACC INFRABUILD PRIVATE LIMITED