REPAIR/MAINTENANCE TO EXTERNAL WATER SUPPLY AND ALLIED WORKS AT RS AREA REPAIR/REPLACEMENT OF INTERNAL WATER SUPPLY AND ALLIED WORKS FOR BLDG NO R-01 TO R-19 R-20 TO R-39 AT RS AREA UNDER GE (NW) NAVY NAGAR, COLABA, MUMBAI

Amount

Supply and fixing in repair of steel water tubing, galvanised, Medium grade with all fittings such as nipple, union, socket, elbow, bends, fixed to wall including work to be done up to 15 th floor in high rise buildings in any length including breaking the existing brick wall for replacement of concealed corroded GI pipe fixed on wall and making good the disturbed surfaces to match with existing structure complete all as specified and directed by Engineer-in-charge of following sizes :- Note- Work shall be executed in high rise bldg upto 15 th floor.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

80 mm bore

Supply & fix in repair PVC (LLDPE) rectangular loft tank of net capacity 275 Ltrs with gross capacity of tank at least 5% in excess of minimum net capacity including providing 03 Nos adopter with washer for inlet/outlet/ overflow pipe as per manufacturerer s instruction and overall dimension as 995-1200mm length, 620-820mm width, 285-485mm height, 300mm internal dia of hand hole, minimum wall thickness 2.75mm ( weight of tank 11 Kgs) with lid cover complete all as specified and directed by Engineer-in- Charge.

Supply and fix in repair PVC profile suitable for 275 ltrs loft tank including fixing of aluminium channel around the profile complete all as specified and directed by Engineer-in- Charge.

Supply and fix in repair bronze pressure reducing valve suitable for 25 mm bore GI pipe with diaphram cover, spring clamps, cast iron body scatting and adjustable screws and stop valve of chromium plated carbon steel strainer including screws of stain less steel for domestic water supply, suitable for inlet pressure as per IS-7939, including GI pipe connection as required, the work to be carried out from G+14 floor on plain wall with necessary bamboo scaffolding and safety equipment complete all as specified and directed by Engineer-in-Charge.

Supplying and laying in repair of CPVC pipes 15 mm nominal bore SDR 11 & Plain CPVC SDR 11 fittings such as nipple, union, socket, elbow, bends, tee, adopter e.t.c fixed to wall/floors/ceiling in short piece/length complete all as specified and directed by Engineer-in-charge. Note- Work shall be executed in high rise bldg upto 15 th floor.

Ditto- as per item No-5 above but 20 mm bore

Supply and fix in repair concealed CP stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends suitable for GI tubing 15 mm bore or 20 mm outer dia CPVC pipe complete all as specified and directed by Engineer-in-charge.

Supply and fix in repairs angle cock for GI tubing 15 mm bore or 20 mm outer dia CPVC pipe complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair CP stop cock cast copper alloy , screwed down with crutch or butterfly handle suitable for GI tubing 15 mm dia bore or 20 mm outer dia CPVC pipe complete all as specified and directed by Engineer-in-charge.

Supply and fix in repairs CP bib tap cast copper alloy, with crutch or butterfly handle screwed down both ends for GI tubing 15 mm bore or 20 mm outer dia CPVC pipe complete all as specified and directed by Engineer-in-charge.

Dismantling of existing connection and taking out pressure reducing valve of size 25 mm bore cleaning servicing and refixing at existing location in high rise buildings (G+14) including provision of fittings, i.e. union, elbow, bend, nipple, etc. complete all to make the line functional all as specified and directed by Engineer-in-charge. Note:- (a) All safety measures shall be taken by the worker/plumber while carrying out the work. (b) Rate of scaffolding shall be included in the quoted rate.

Supply and fix in repair brass float valve (ISI marked) high pressure with polythelene float (flat) and fly nut complete screwed for GI pipe 15mm bore including necessary GI fittings such as elbow, reducer, nipple etc complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair brass float valve (ISI marked) high pressure with polythelene float (flat) and fly nut complete screwed for GI pipe 20 mm bore including necessary GI fittings such as elbow, reducer, nipple etc complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair brass float valve (ISI marked) high pressure with polythelene float (flat) and fly nut complete screwed for GI pipe 25 mm bore including necessary GI fittings such as elbow, reducer, nipple etc complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair brass float valve (ISI marked) high pressure with polythelene float (flat) and fly nut complete screwed for GI pipe 30 mm bore including necessary GI fittings such as elbow, reducer, nipple etc complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair gun-metal, gate valve(ISI marked) in existing line in position with iron wheel head of class I, made out of brass, screwed both ends for GI pipe with union, complete all as directed of the following all as specified and directed by Engineer-in-charge :-

15 mm bore

25 mm bore

40 mm bore

50 mm bore

80 mm bore

M& L for Cleaning of loft tanks of capacity 275 ltrs in existing position by mechanised pressure, cleaning using PVC tank cleaning solution and draining out the water by wet vaccum pump, rinsing with clean drinking water and providing sticker showing the date of cleaning complete all as specified and directed by Engineer-in-charge. Note :Any damage to pipe and PVC tank during cleaning shall be made good by the contractor at his own cost.

Supply and fixing 125 mm dia shower rose, brass chromium plated with swivel joints and fixing to 15 mm bore GI water tubing complete all as specified and directed by Engineer-in-charge.

S&F in repairs Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT (min weight 40 gms) any colour complete all as specified and directed by Engineer-in-charge

M&L Checking of over head tanks of any capacity, making arrangement of mosquito proofing of the tank from overflow side with new GI tank nipples, socket, barrel nipple, elbow, MS wire net, locking the existing tank cover to avoid entry of lizards, mosquitos inside the tank, tightening of all inlet and out let connections to make the tank no leaking of water complete all as specified Note: Rates are deemed to include cost of wire mesh, barbed wire, nut, bolt, washer for titghtening of lid cover and anti-mosquto net proofing.

S & F Fire extinguisher water CO2/stored pressure type 9 ltr capacity (IS:15683) complete all as specified and directed by Engineer-in-charge

S & F Fire extinguisher Dry chemical powder type (ABC), 6 Kg capacity (IS: 15683) capacity complete all as specified and directed by Engineer-in-charge

S & F Fire extinguisher CO2 4.5 Kg capacity (IS-15683) complete all as specified and directed by Engineer-in-charge

Disconnecting carefully water and electric connection from storage type gyser of 25 ltrs capacity of any make and dismantling for repair/maintenance by taking out siphon /geyser assembly, thermostat, heating elements, indication lamps and all necessary accessories and cleaning, de-scaling the inner tank by using de-scaling chemical compound including soldering, brazing the inner tank if required, re-assembling the geysers after cleaning & servicing including replacement of flexible 3 core cable of size 2.5 sqmm with copper conductor up to 1.5 mtr long and refixing in existing position complete all as specified and directed by Engineer-in-charge. Note:- (i) Heating element, thermostat, indication lamp, safety valve & Siphon/geyser assembly shall be measured and paid under relevant items. (ii) The rate quoted is deemed to include the cost of soldering /brazing/control wiring of geyser, air release valve and glass wool supirior quality if required.

Supply and fixing in repair heating element of capacity of 1500 Watts of triangle type/circular type for 25 Ltr geysers complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs of Thermostat suitable for 25/50 ltrs capacity water storage geyser with automatic thermal cut out including testing, complete all as specified complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs of copper Geyser / siphon Assembly with rubber paking for 25/50 ltrs capacity water geyser with automatic thermal cutout including testing, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs of CP Safety valve brass of 15 mm dia,for geyser all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs of indication lamps suitable for 25/50 ltrs water storage geyser all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs of inner copper water storage tank of capacity 25 ltrs for water storage geyser all as specified and directed by Engineer-in-charge.

supply and fixing in repairs PVC flexible connection pipe heavy duty 15 mm size with PTMT nuts on both ends of length 450 mm with two washers, suitable for cold water connection to geyser all as specified and directed by Engineer-in-charge.

Material & Labour for attending complaints for repairs of internal and external water supply in old/New Navy Nagar area, removal of airlock, tightening of leaking pipes/valves inside or outside the bldgs, repair to concealed/open pipe line, Complaints of Raw water pipe line and fittings and other work pertains to internal water supply all as directed. Note:- (a) Complaints should be taken from complaint cell or also through telephone by JE E/M and AGE W/S by your representative every day including sunday and holiday. (b) Complaints should be attended immediately and shall report the JE E/M / Engineer-in-charge after completion within 6 Hours. (c) In case the nature of job is such that the work cannot be completed within a period of 6 hours then the same shall be brought to the notice of the GE/Engr-in-charge and the period for the completion of the complaints shall be decided by the GE/Engr-in-charge. (d) Contractor representative /Engineer will report to JE E/M in charge or AGE E/M at forenoon and afternoon daily to collect routine urgent works till completion of the CA . (e) The transportation /T&P required for the work shall be arranged by the contractor and no extra cost will be paid for the same. (f) Contractor should provide regular team attending complaints. (g) The labour for the New itemes which are 'Supply and fix' type, will not be paid under this item. (h) The work to be carried out from G+14 floor on plain wall with necessary bamboo scaffolding complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs of CP mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs & wall flanges type for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs 15 mm bore PVC bib tap with crutch or Duro or butterfly handle screwed both ends suitable for GI tubing/CPVC pipe or 20 mm outer dia CPVC pipe and fixed including necessary fittings, clamp & saddles (Minimum weight 15mm-90gms/20mm 125gms) complete all as specified and directed by Engr-in-Charge.

S& F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, of size Fe 410-W(GdeE- 250) quality A or all as specified and directed by Engineer-in-Charge. (ii) Cost of making necessary holes in wall making good the disturb surfaces using cement and sand mortar for fixing iron section is deemed to be including in the rate quoted.

S& F in repair 3-layer PP-R Polypropylene random copolymer) pipes green and blue colour SDR 7.4 & SDR 11 UVstablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors or shaft of building up to G+15 all specfied and directed by Enginner-in-charge of following sizes:- etc.

S& F in repair 3-layer PP-R Polypropylene random copolymer) gate valve (ISI Marked)with iron wheel head screwed both ends for iron pipe including fittings i.e. union, socket etc complete all as specified of following sizes :- etc.

Excavation in trenches not exceeding 1.5 mtr wide not exceeding 1.5 mtr in depth and getting out in soft/loose soil all as specified.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms in any type of soil all as specified.

Removing excavated material exc 250 M but n.exc 500 M and depositing where directed all as specified.

Cleaning of PVC and RCC water storage tank in high rising buildings(G+14) by mechanical high pressure spray and remove all foreign matter completly and soaking out the water/dirt with a high pressure wet vaccum pump and removing spoils out side of MD land and complete all as specified and as directed by Engineer-in-charge. Note: Rate include the painting of two coats of enamel paint with visible colour about date of cleaning and due date for cleaning complete all as specified.

OH Tank of capacity 5000 Litres

OH Tank of capacity 3000 Litres

OH Tank of capacity 2000 Litres

OH Tanks of capacity 1000 Litres

Supply and fixing in repairs, Installation, Testing & Commissioning of Motor Actuated butterfly Valve (with wheel for manual operation) consisiting of suitable single phase Actuator and ball valve of size 40/50 mm dia with appropriate bracket/mounting including arrangement for two nos. limit switches for open and closed condition and splash proof enclosure complete all as specified and directed by Engineer-in-charge. SpecificationSupply and fixing features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Material of Ball: Stainless Steel Limit Switches : 02 Nos.For open and close status Mounting :Direct on valve

Supply and fixing in repairs, Installation, Testing & Commissioning of Motor Actuated Ball valve (with wheel for manual operation) consisiting of suitable single phase Actuator and ball valve of size 80 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure complete all as specified and directed. SpecificationSupply and fixing eatures Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Material of Ball: Stainless Steel Limit Switches : 02 Nos.For open and close status Mounting :Direct on valve

Supply and fixing in repairs, Installation, Testing and Commissioning of Float type Point Level Sensor magnetic ring type with reed witch including teflon connecting cable complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs, Installation, Testing and Commissioning of OFC Cable to be pulled over head and duly fastened/attached to a PVC coated messenger wire / stay wire of gauge either with the required clamps of suitable size not more than 3 feet apart or with a web between the OFC and messenger wire along with endplates at both ends of the suspended cable complete all as specified and directed. (a) 6F Single mode OFC suitable for outdoor networking applications (i) 6 Fibers type single mode, wavelength 1310, Attenuation 0.38/km (ii) Outer jacket of HDPE sheath (iii) Jelly Filled Core (iv) Wrapped with Corrugated Steel Tape (v) Armoured with a pair of Steel Wire for rigidity (vi) Anti Termite and rodent repellent (vii) Water Proof and moisture resistant

Supply and fixing in repairs, Installation of PVC Coated Suitable Dia GI messenger wire / stay wire of gauge either with the required clamps of suitable size not more than 3 feet apart or with a web between the OFC and messenger wire along with endplates at both ends of the suspended cable complete all as specified and as directed.

Supply and fixing in repair PVC insulated PVC sheathed armoured copper conductor cable of size 4Core x 1.5 Sqmm fixing on walls with saddles complete all as specified and directed by the Engr-in-charge.

Supply and fixing in repair PVC insulated PVC sheathed armoured copper conductor cable of size 4Core x 1.5 Sqmm fixing on walls with saddles complete all as specified and directed by the Engr-in-charge.

Supply and fixing in repairs, Installation Testing & Commissioning of direct acting type release solenoid valve for air release during priming; with follwing specifications : Size: 10 mm, Pressure rating: 10 kg / sq. cm. Type: Normally closed

Supply and fixing in repairs, motor actuated ball valve suitable for 25 mm GI pipe for priming of pump including all necessary GI fittings, testing and commissioning with following specifications: Size: 25 mm Pressure rating: 10 kg / sq. cm.

S&F in repair Rotational moulded multilayer (minimum three layer) polyethylene water storage tank of 5000 Ltrs Capacity confirming to IS12701(1996) hoisting and fixing in position at any location removing existing distmantling RCC/PCC OHT and including making new foundation as well as disconnecting all incoming & out going connection, provision of new tank fittings & connecting it at existing position up to 50 mm GI Pipe connection with nipple, union etc complete all as specified and directed.

S&F in repair Rotational moulded multilayer (minimum three layer) polyethylene water storage tank of 2000 Ltrs Capacity confirming to IS12701(1996) hoisting and fixing in position at any location removing existing distmantling RCC/PCC OHT and including making new foundation as well as disconnecting all incoming & out going connection, provision of new tank fittings & connecting it at existing position up to 50 mm GI Pipe connection with nipple, union etc complete all as specified and directed.

Material and labour for repairs only CP cast copper alloy bib tab/stop valve/angle cock/shower/CP mixer 3-in-1 system of any make and size including necessary fittings, clamp & saddles, washers, tooles complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair Cast iron pipes with spigot and socket ends centrifugally cast class LA, in any length, laid in trenches, on ground, including clamping, nut, bolt, washers and welding work etc of the following sizes complete all as specified and directed :-

300mm bore

250 mm bore

150mm bore

100mm bore

80mm bore

Supply and laying in repair of spigot and socket ductile iron (DI) water tubing, class K-9, cement mortar lining on inner surface and one coat of bituminous paint over exposed surface ISI marked, IS No 8329: 2000, including rubber joint of suitable size laid on roof/floor/trenches with proper alignment as per site requirement and carryout testing against leakage before filling the trenches etc complete all as specified and directed.

350 mm bore

300 mm bore

250 mm bore

200 mm bore

150mm bore

100mm bore

80 mm bore

M & L for CI specials in repair confirming to IS - 1538, spigot /socket or flanged fitting i.e. bend, tee, collar, flanged/ socket /spigot, Tappers and tails pieces etc suitable for 80/100/150/200/250/300 mm bore pipes (joints and jointing material shall be measured and paid seperately)

M & L for DI specials in repair confirming to IS - 9523, spigot /socket or flanged fitting i.e. bend, tee, collar, flanged/ socket /spigot, Tappers and tails pieces etc suitable for 100/150/200/250/300/350 mm bore pipes (joints and jointing material shall be measured and paid seperately)

M & L for Cutting existing ductile iron (DI) pipes and reducing for insertion of DI fittings to required length in position for following sizes :- Note :- Pipe fittings used shall be measured and paid under relevant items of schedule 'A' remaining items like including nut, bolts, washers, rubber gasket, flanges, T&P, welding works etc required shall be deemed to be included in the quoted rate.

350 mm bore

300 mm bore

250 mm bore

200 mm bore

150 mm bore

100 mm bore

80 mm bore

M & L for Cutting existing cast iron (CI) pipes and reducing for insertion of CI fittings to required length in position for following sizes :- Note:- Pipe fittings used shall be measured and paid under relevant items of schedule 'A' remaining items like including nut, bolts, washers, rubber gasket, flanges, T&P, welding works etc required shall be deemed to be included in the quoted rate.

300 mm bore

250 mm bore

200 mm bore

150 mm bore

100 mm bore

80 mm bore

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land complete all as specified and directed by the Engr in charge. Note: The place of disposal shall be find out by the contractor.

M&L cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in support of CI pipes, foundation and hardstanding finishing even and fair without using extra cement mplete all as specified and directed by the Engr in charge.

S&F in repair in Sluice valves flanged end, cast iron body, flanged and drilled and rising type steel spindle with nut, long body, class PN 1.6, conforming to IS14846 of 2000 for following sizes in any position/location including all flange joint with rubber or fiber board gaskets, bolts, nuts, washers, welding etc complete including pumping out accumulated water all as specified and directed of following sizes:- Note :- For Additional manpower, welding, chipping, plastering and any other item required for replacement of the item including making good the disturbed surfaces are deemed to be including in the item rate and no extra payment will be claimed by the contractor to the work.

300 mm bore

250 mm bore

200 mm bore

150 mm bore

100 mm bore

80 mm bore

M&L valve pit chamber in repair of size 1.2 x 1.2 x 1.2m (internal dimension) (above GL 0.30 mtr), 15cm thick foundation using PCC 1:4:8 type D-2 over 15cm thick hardcore of broken stone, 23cm thick brick walls built in cement and sand mortar 1:4, 15mm thick internal and external plaster including top of floor in cement and sand mortar 1:3, 15mm thick, finished even and smooth, without using extra cement, 5 mm thick MS plate cover over complete chamber on 50mm x 50mm x 6mm MS angle frame embeded in PCC 1:2:4 type B-1coping, having rectangular, hinged, opening of size 150 x 100mm with locking arrangements, hold fasts, etc, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of debris outside MD land complete all as specified. Note:- Rates for removing of old plasters, broken stones/bricks, PCC of any type, earth work, MS Chanel, MS Plate e.t.c are deemed to be inclueded in the quoted rated.

Attending the water supply breakdowns of any size/type of pipes in any position/location/depth including necessary excavation, earth work, cutting of pipes, welding, replacement of pipes of any nature, flanges, bends, collars, nut bolts, gasket, run lead joint or any other items required for rectification of break downs, testing and making good to the disturbed surfaces after rectification complete all as specified and directed for the following size of pipe lines :- Note :- (a). Items like run lead joint, CI/DI/MS fittings or pipes, Gasket shall be measured and paid separately under relevant item of schedule 'A (b). Remaining items are shall be deemed to be included in the item rate and no extra payment shall not to be claimed for the completion of break down. (c). After hand over of complaint, contractor shall complete the break down within 6 hrs or other wise panel recovery shall be made 2500/- per breakdown

350/300 mm dia CI/DI/MS pipe line

250/200 mm dia CI/DI/MS pipe line

150/100 mm dia CI/DI/MS/GI pipe line

80 mm dia CI/DI/MS/GI pipe line

M & L for run lead joint in repair with pig lead to repair the joints for following sizes of pipes :-

300 mm bore

250 mm bore

200 mm bore

150 mm bore

100 mm bore

80 mm bore

Material and labour for rubber gasket joint including nut, bolt, washers etc of following sizes complete all as specified and directed

350 mm bore

300 mm bore

250mm bore

200 mm bore

150 mm bore

100 mm bore

Material and labour for bacteriological and chemical analysis of water sample at govt approved lab (Iso 9001:2008)including collecting sample from pumphouse using labed owned sample jar and testing every month all directed and specfied by Engineer-in-charge

Taking down GI tubing fixed to wall at location cleaning and refixing the same with clamping by suitable size of MS clamp, nut, bolt, washers on wall/floor/shaft of bldg including provision of necessary fitting in high rise building (G+14 stories) for the following:- (a) All safety measures shall be taken by the worker/plumber while carrying out the work. (b) Rate of scaffolding shall be included in the quoted rate.

15 mm bore

20 mm bore

25 mm bore

40/50 mm bore

80 mm bore

Supply and Fixing in repairs FRP lid cover on existing PVC tank including complete accessories for closing and locking arrangement as per BMC Specification. Suitable for :

5000 Ltrs PVC tank

3000 Ltrs PVC tank

2000 Ltrs/1000 Ltrs PVC tank

S&F in repair PVC water storage tank 3 layer hoisting and fixing in position at any location removing existing distmantling RCC/PCC OHT and new foundation making as well as disconnecting all incoming & out going connection, provision of new tank fittings & connecting it at existing position up to 50 mm GI Pipe connection complete all as specified and directed.

5000 Ltr capacity

3000 Ltrs capacity

2000 Ltr capacity

1000 Ltr Capacity

Supply and fixing in repair three phase on load change over switch with handle made out of sheet metal enclosure of capacity 250 Amps, 4 pole, side handle, 415 Volts, 50 Hz complete fixing on wall with grouting of base frame and suitable nut bolts all as specified and directed

Supply and fix in repair foot valve threaded type or flanged type in existing location or new position or location in the sump of any capacity including making of flanged joints, nut bolts washers rubber gasket welding work flange joints etc and repair making good to existing PCC surface of following sizes :-

80 mm bore

150 mm bore

200 mm bore

250 mm bore

300 mm bore

Supply and fix in repair of Non return valve confirming to IS 5312-1(2004) including nut, bolts, washer, flanges, gaskets, wleding works etc of the following sizes :-

300 mm dia

250 mm dia

200 mm dia

150 mm dia

100 mm dia

Supply and fix in repair of Butterfly valve confirming to IS 13095: 2020 including nut, bolts, washer, flanges, gaskets, wleding works etc of the following sizes :-

250 mm dia

200 mm dia

150 mm dia

100 mm dia

80 mm dia

Supply and fixing in repairs MS ERW pipe heavy grade, ISI marked for suction and deliver for pump including necessary fittings, flanges, welding, and providing necessary PCC support, pipe may lay in trenches or fixed on wall, make a arrangement to frame the pipe in shape as requred on site by cutting and welding in peases painting with one coat of red oxide primer & two coat of synthetic enamel paint all as specfied and directed by Engineer-in-charge of following sizes :-

300 mm bore

250 mm bore

200 mm bore

150 mm bore

100 mm bore

80 mm bore

Scrapping of paint complete pump and motor, base frame and accessories complete including making new synthetic enamel paint of two coats over a coat of red oxide primer of motor of capacity 15 HP to 75 HP complete all as specified and directed.

Rubbing with emery papers for removing of rusting material on fire fighting Pipe lines, fittings, motors, pumps, cabinet boxes, valve chamber covers, fire brigades and other items relating to complete fire fighting system in buildings up to (G+15 floors), cleaning and painting with two coats red colour synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

R.C. Magla and Co. (BID ID -3409138)

Bob Enterprises (BID ID -3409271)

SHRI SAI ENTERPRISES (BID ID -3404286)

SHREE JAGDISH FURNITURE CO. (BID ID -3405083)