REPAIR TO JOINERY, GI AND SANITARY FITTINGS AND MISC B/R WORKS AND REPAIR TO PATH HARDSTANDING AND RELATED WORKS IN ADM AREA AND OTM ACCN GRC UNDER GE KAMPTEE.

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposal of rubbish outside of MD land complete all as specified and as directed .

M&L for brick work with fly ash bricks old size , straight or curved on plan exc 6 m mean radius , built in cement mortar 1:6 complete all as specified and as directed.

All as per item No 2 here-in-above but half brick wall in CM 1:4 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

All as item No 6 above but as in skirting/dado etc with 10mm backing in cement mortar 1:4 complete all as specified and as directed .

M&L for coloured/printed glazed ceramic tiles 300x450x6 to 7mm thick, in walls skirting/dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and as directed.

M&L for Machine cut Kota stone slab flooring 18-25 mm thick over cement 20mm thick screed bed or bedding in CM 1:6 laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishing complete, all as specified and directed.

S&F pre-polished granite 20mm thick fixed on platform/shelves over 20mm thick screed bed in cement mortar 1:6 including necessary moulding etc complete all as directed.

S & F for green/white marble 18-20 mm thick of, machine cut as in riser, dado platform etc set and jointed in white cement slurry over 10mm thick rendering in cement mortar (1:3) and pointed in white cement including cutting, polishing (mirror type)or use in shelf and cupboard etc complete all as specified

Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

S & F for Solid PVC Double door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet reinforced with M.S. tube, complete all as specified and as directed.

S & F for Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel with particle board core design with 2mm thick plain colour PVC Prelam PVC Sheet on back face, complete all as specified and as directed.

S & F for Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

Taking down shutters only of any description area not exc 1.00 sqm each complete all as specified and directed.

Taking down shutters only of any description area exc 1.00 sqm but not exc 2.00 sqm complete all as specified and directed.

S&F steel windows with side hung shutters factory made incl box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.

All as per item No 20 above but without glazing bars complete all as specified and directed.

S&F steel ventilator factory made with top hung shutter including hinges steel peg stay with glazing bars ,complete all as specified and as directed.

S&F framed work such as grills, etc with ends of bars shouldered and or reverted or forged into spikes, framed guard bars and similar work conforming to Fe- 290-0 Gde-E-165 complete all as specified and as directed.

M&L for Second class hardwood plain, solid, straight chowkat and frame wrought framed rebated on the solid rounded chamfered put together with glue pinned at joint complete all as specified and directed.

S&F, factory made kiln seasoned chemical treated 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides face is covered with both side decorative face veneer with lapping/frame to match complete all as specified and directed.

S&F 30mm thick 2nd class HW glazed and skeleton door shutters, open rebated without sash bar and prepared to receive wire gauge edges cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I section and clause 8.20 (a) fitted to chowkats or frames of any number of panels complete all as specified and directed.

S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm wood grain colour (or match with shutter) PVC sheet reinforced with MS square tube opening as per drawing complete all as specified and as directed.

S&F factory made solid panel PVC door wire gauzed i.e. panel will be of wire gauze both side pre-laminated PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S tubes. The wire gauge shall be stretched to tighten firmly partly wired and partly panelled shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S. tube shall be covered with heat moulded wood grain colour PVC 'C' channels having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour pvc sheet for top rail, panelling of wood grain colour pvc sheet to be fitted in the M.S. framed welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined the together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

M&L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, complete all as specified and as directed.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws complete all as specified and as directed.

S&F fixing aluminium grill for windows in approved design/ pattern , fixed with aluminium beading complete all as specified and directed.

S&F brass mortise lock (4 levers), vertical type, size 100mm long including all fitting arrangements complete all as specified and as directed.

S & F heavy duty double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel complete all specified and directed.

S&F for sheet glass 5.50 mm thick tinted quality and glazing exc 0.5 sqm in each punel complete all as specified and directed by Engineer-in-Charge exc 0.50 sqm in each panel

S&F pre laminated particle board 12 mm thick exterior grade decorative choice 1mm thick lamination both sides fixed with necessary Aluminium beading complete all as specified and directed.

S&F 100mm long stainless steel butt hinges. heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F 100mm long butt hinges med wt cold rolled mild steel and fixed complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and as directed.

S&F in repair 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair 300 mm long Aluminium sliding door bolts, bolt type bolt 16 mm dia with and including fixing with of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F in repair floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair door closer hydraulically regulated, designation No 2, universal type, aluminium (Die cast body) suitable for door shutters complete all as specified and directed.

S&F mild steel Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete. complete all as specified and as directed.

S&F 100mm long fancy type butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and as directed.

S&F 200mm long fancy type brass skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt 12mm dia complete all as specified and as directed.

S&F 250 mm long fancy type brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F fancy type brass door spring ordinary rat tail rod pattern springs including roller and roller plate of mild steel 300mm long complete all as specified and as directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane in each pane including taking down old broken glasses complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane including taking down old broken glasses complete all as specified and as directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all specified and directed.

M&L two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or girth over one coat of pink primer including preparation of surfaces complete all as specified and as directed.

M&L for one coat of synthetic enamel paint over old painted wooden surfaces of any description over 10 cm in width or girth including preparation or surfaces complete all as specified and as directed.

M&L two coat of synthetic enamel painting over a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth complete all as specified and as directed.

M & L for preparation of old steel surfaces of any description over 10 cm width or girth & applying one coats of synthetic enamel paint complete all as specified and directed

M&L for running welding in repairs including cleaning and preparing surfaces for welding, thickness of metal to be welded not exc 6mm such as MS butt hinges to MS frame, broken steel windows or ventilator, iron doors and similar work complete all as specified and directed.

Dismantling of ceiling boards (fibre, pulp, insulation etc) or insulation boards/blankets any thickness, including cover fillets/GI SNAP GRID/POP ceiling etc all as specified and as directed.

S&F 5mm thick colour/printed designer PVC wall/ceiling sheet in strips and channel feathered at the edges for fixing on solid PVC wall/ceiling lining insulated PVC wall/ceiling lining and solid PVC partition inclusive of solvent cement and fixing arrangements (suitable fillet, H-joint, U-end, J-edge, External corner and internal corner, horizontally, vertically or at any height and angle) at site, complete all as specified and directed. Note:- PVC wall/ceiling lining should be reversible, waterproof, washable, rib-reinforced, rigid, standard metal.

Providing and fiixing ceiling at all heights with GRG (Glass fibre reinforced gypsum) false ceiling tilesof size 595x 595mm of approved texture design and patterns having moisture content less than 2% humidity resisitance of 995 NRCO. 5 to .75 as per IS 8225: 1970 and light reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanised iron sectio of .33mm thick (galvanised @ 120gms per sqm including both sides per sqm including both side comprising of main T runner of size 15x 32 mm of length 3000mm cross T of size length 600 mm to form gride Gavanised @80 Gm per sqm I.e 50 mm long and 8mm outer diameter M -6 fasteners 6mm dia fully galvanised hanger rod upto 1000mm long L shaped level adjuster of size 85x25x2 mm galvanised iron perimeter wall angle of size 24x24x.4 mm of length 3000mm to be fixed on partition wall with the help of plastic rawl plugs at 450 mm center to center 40 mm long dry wall wood screws caried out as per specification and drawing all as directed by engr in charge with semi perforated 12 mm thick micro trangular edge GRG false ceiling tiles complete all as specified and directed.

M&L for 10 to 12mm thick toughened tinted/plain glass fixed to door or as partition or any other location including with brackets, supports, handles, lock , bottom machine and other accessories as required design complete all as specified and directed.

S&F in repairs 18/19mm Prelaminated particle board, interior grade prelaminated one side decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F IInd class hard wood fillets, square or rectangular or triangular in section, wrought fixed to wall with nails area exc 6sq cm but not exc 13 sq cm complete all as specified and directed.

All as per item No 65 above but area exc 3 Sq cm but not exc 6 Sq cm complete all as specified and directed.

S&F in repair IInd class hard wood fillets, square or rectangular or triangular in section, wrought fixed to wire mesh door frame with nails, area not exc 3 sq cm complete all as specified and directed.

M&L for external teak wood lipping 18/19 x 6mm thick fixed with nails complete all as specified and directed.

Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and disposal of rubbish outside of MD land complete all as specified and directed.

M & L for rendering 10mm thick in CM 1:6 on brick work or concrete surfaces including finished fair and even (in patches) complete all as specified and directed.

M & L for rendering 15 mm thick in cm 1:4 on brick or concrete surfaces even & fair smooth, using water proofing liquid compound and without using extra cement (in patches) complete all as specified and directed. Note: water proofing liquid will be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying two coats of OBD over a coat of primer and a coat of wall care putty etc complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1(using 20mm graded aggregate) as in coping/roof kerbs/bed blocks/hold fast etc or mud stops, steps etc rounded or chamfered on edges complete all as specified and as directed.

S&F 100mm hasp & staple safety type aluminium with mild steel hing pin including bolt to hinge plate and fixed with screw complete all as specified and directed

S&F continuous (piano) hinges, width of flaps(when open in 30mm) mild steel, bright finish or electro galvanised complete all as specified and directed.

M&L for repair of cupboard of any type and description such as channel, hinges, magnet/ball catcher, roller etc where as required complete all as specified and directed. Note : Rate of material included in the rates quoted.

Preparation of new or previous untreated surfaces of steel and iron of any description n exc 10cm width or girth not when unconnected with other painting or when painted in a different tint and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair stainless steel draphary curtain rods 25mm bore and 1mm thick, including with brackets/holders etc cut to length complete all as specified and as directed.

Taking out existing unserviceable wooden wardrobe including chowkhat of overall size 1000mm x 1900mm approx from existing position of married & single accn including supply & fixing steel wardrobe including chowkhat of same size at the same position in Md and single accn all as directed to ensure proper & smooth functioning of wardrobe to the entire satisfaction of Engr-in-Charge. The overall outer size of chowkhat will be 1000mm X 1900 mm approx, made with 0.5mm thick plain black MS sheets and overall shutter size of wardrobe 945mm X 1845mm (approximate) having 2 shutter, 06 Nos of 75mm long, medium weight, MS butt hinges and one number approved quality chromium plated MS handle & one number MS lock of approved quality CP of Godrej pattern with key in duplicate. Thickness of all MS sheets to be used in wardrobe for any purposes including chowkhat, shutter, bracing and back etc except shelves shall be of 0.5mm thick and 02 numbers shelves of size 1.00 x 0.5m approx made of 1mm MS sheet shall be fixed suitably and properly with rivet /welds for storing clothes etc in wardrobe.

Cont../- item No. 82:- 01 No MS approved pattern tie hanger shall be fixed in one shutter. One number MS peg set of three shall be fixed in other shutter of wardrobe. 18mm dia MS conduit pipe chromium plated with suitable & approved quality bracket will be fixed to both gable wall of wardrobe. Suitable pattern MS sheets bracing to shelves and shutters shall be provided to avoid any sagging and other related problem in smooth functioning and proper use of wardrobe. All cement plaster, brick wall, PCC, RCC etc disturbed during dismantling of wardrobe shall be made good in cement motar 1:3 properly as per site condition and technical requirement all as directed by Engr-in-Charge. In the bottom portion of wardrobe (of size 1.0 x 0.60m approx) 7mm thick glazed tile exc 0.06 sqm and not exc 0.11 sqm of approved colour and shade shall be laid over and including screed bed of 15mm thick in CM 1:6 including filling the joint with matching colour of tiles. In the sides (of size 0.58 x 1.88m approx each) and back portion of wardrobe (of size 1.0 x 1.88 m approx) 350mmx450mmx7mm thick glazed tile of approved colour and shade shall be fixed over

Cont../- item No. 82:- and including backing coat of 10mm thick in CM 1:4 including filling the joint with matching colour of tiles. Inside surface of ceiling of wardrobe (of size 1.00x0.60m approx) shall be finished with two coats of OBD over a coat of birla white wall care putty after making good surface properly. Chowkhat will be fixed with suitable rawl plug with and CP steel screw inside wall etc & adjacent surfaces shall be made good to match with adjacent finishing surfaces properly as required and directed for entire completion of work. All steel surface will be painted with two coats of synthetic enamel paint with approved shade and colour by spray painting over one coat of red oxide primer including preparation of surfaces. All other misc work will also be carried out for entire completion and smooth functioning complete all as specified and directed.

M&L for Grouting in RCC wall/floor/roof through PVC nipples at a spacing of 45 to 60cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizing admixture like FOSROC(model CEBEX100) or PIDILTE (model 207 PIDICRET 8AM) @ 225gms/50kg of cement to fill up all capillaries/voids/honeycombing, nozzles to be sealed with the sealing with pressure of 2 to 4 Kg/sqcm and continued till refusal. After instructions complete all as specified and directed. Note-After ascertaining the location of leakage/seepage/dampness under relevant item shall be operated of the required location complete all as specified and as directed.

M&L post construction anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.

M&L post construction anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

S&F in repairs GI water tubing medium grade 15mm bore galvanized with all fittings & fixture complete to walls and ceilings or laid in floors including Taking up or down steel tubing and connections complete all as specified and as directed.

S&F in repairs GI water tubing medium grade 20mm bore galvanized with all fittings & fixture complete to walls and ceilings or laid in floors including Taking up or down steel tubing and connections complete all as specified and as directed.

Taking down and refixing of shutter of any description complete all as specified and as directed. Note : Refixing incl taking down easing and adjusting and also refxing builders hardware as reqd incl removal of unserviceable screws etc. Not exceeding 1 Sqm each

All as per item No. 90. but above Exceeding 1 Sqm n.exc 2 Sqm each complete all as specified and as directed.

All as per item No. 90 but above Exceeding 2 Sqm each complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide & 10 Sqm on plan and n. exc 1.50 m deep and getting out in hard dense soil complete all as specified and directed.

Excavation in trenches exc 1.5m wide & 10 Sqm on plan and n. exc 3.00 m deep and getting out in hard dense soil complete all as specified and directed.

Returning filling in trenches incl spreading,levelling, watering& well ramming in layers n.exc 25 CM thick complete all as specified and directed.

Removal of excavated material exc 50 m and n.exc 250m and depositing where directed at a level n.exc 1.5 m above the starting point in soils complete all as specified and directed.

M & L for PCC 1:4:8 Type D2 (using 40 mm graded stone aggregates) as in foundation of man holes etc complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings including attached pilasters and buttresses complete all as specified and directed.

M& L For Stone kerb of roughly squared stones of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces sides and 20mm for the rest of surfaces jointed in cementmortar 1:6 and struck flush complete all as specified and directed.

M&L for premixed bituminous macadam (consolidated thickness 75mm or less) using with 4% binder content (paving bitumen any penetration of Grade VG-30) by weight of total mix, mixed in hot mixed plant and laid by using mechanical paver and rolled and compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed.

M&L for premix asphaltic semi-dense concrete 30mm consolidated thickness with 5.5% binder content (paving bitumen any penetration of grade VG-30) by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified ans directed.

M&L for precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs, for manholes etc and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

M & L for forming fair finished drain or channel 50 CM in girth in CM concrete using extra cement in cl form moulds complete all as specified and directed.

M & L for 300mmx300mmx25mm chequered (or any approved design) cement concrete tiles colour glossy finished rubber pressed set jointed and pointed in neat cement slurry and pointed in coloured pigment over and including 20mm cement screed bed in cement mortar 1:6 complete all as specified and directed.

S&F for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No. 105 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for reinforced concrete pipes, class NP2, laid and jointed complete with collar for the 600 mm internal dia of pipes complete all as specified and directed.

M&L For PCC 1:3:6 as in Concrete bed to drain pipes including packing under and haunching for 150mm bore pipe against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregated) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for any dia of pipes complete all as specified and directed.

M & L for rendering 15 mm thick on concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement for surfaces of Area Drain complete all as specified and directed.

Demolition of cement concrete in ground floor & pavings n.exc 15cm thk (below or above ground level) complete all as specified and directed.

M & L for Hardcore of gauge n exc. 63 mm Broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L of Machine pressed precast concrete interlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with Grey cement and pigment over and including 30mm thick layer of crushed stone sand complete all as specified and as directed.

M & L cement concrete tybe B- 1, 1:2:4 (using 20mm graded stone aggregate) in floor finish concrete surface even and smooth without using extra cement complete all as specified and as directed.

M & L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'B' complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 93435.00]

M/s T.S.JOHAR (BID ID -3144047)

VIJ ASSOCIATES (BID ID -3146970)

SHIV SHANKAR MISHRA (BID ID -3144518)