Widening and strengthening work of Chandanpur-Bhitargaon Dharampur Bamba road (ODR) from km 14 to 22.00 in distt- Kaupur (By Hot Mix Plant)

Amount

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m.asper MORT&H specficatin clause no.301.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.as per MORT&H specficatin clause no 305.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.(for compaction only)as per MORT&H specficatin clause no 305.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 asper MORT&H specficatin clause no.305.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete asper MORT&H specficatin clause no.401.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired densityasper MORT&H specficatin clause no.406.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical broom.as per MORT&H specficatin clause no.503.(Rate Including Emulsion SS-1)

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP 120 TPH using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.(Rate Including Bitumen VG-30)

Providing and applying tack coat with bitumen VG-10 using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.as per MORT&H specficatin clause no.503.(Rate Including Bitumin VG-10)

Providing and laying bituminous concrete with higher capacity batch type hot mix plant 120 TPH using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.(Rate Including Bitumen VG-30)

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.asper MORT&H specficatin clause no.2100.

Plain/Reinforced cement concrete in Foundation / sub-structure complete as per drawing and Technical Specifications.(Grade M20) asper MORT&H specficatin clause no.1500,1700 & 2100.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.asper MORT&H specficatin clause no.1600 & 2200.

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications.asper MORT&H specficatin clause no.1300.

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications asper MORT&H specficatin clause no.1300 &2200.

Plastering with cement mortar (1:3 ) on brick work in sub-structure asper MORT&H specficatin clause no.1300 &2200.

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.asper MORT&H specficatin clause no.1100. 750 mm dia.

Providing and fixing of Hectometer stone as per IRC-8 including painting and letter writing etc as per direction of E/I (HM- Stone)

Providing and fixing of Kilometer stone as per IRC-8 including painting and letter writing etc as per direction of E/I (KM- Stone)

Markings of centre line, Road edge lines on both side of Road with hot applied thermoplastic road marking paint material conforming to MORT&H clause 803.4.2 and marking complete as per clause 803 of MORT&H specifications 2004 (up to date revision)

Supply & Fixing of Linear Delineator System (LDS) Panes made of Micro Prismetic Retro Reflective Sheeting Duly Laminated on thin aluminium foil to a unique corrugated shape to provide Retro Reflection across observations & External Engles Each L.D.S. panel lenghth of 33 inch & ridge shall be approximate L.D.S. Panel is to be Firmaly Fixed on Existing M.S. Ray Welding as & When Required.

Supply and fixing of welded builtup cantilever structure of 6 mtrs. Span comprising of one verticle post 6 M high made up of 300 mm N.B. (M) class MS pipe as vertical member welded with 10 mm MS plate at top and bottom for bearing and horizental frame comprising of 50 mm NB medium class main pipes and 40 mm class medium NB pipes bacing as per approved designed drawing with one coat of steel primer and two coats of synthetic enamel paints,(Including Trade Tax for work including cost of foundation work in 1:2:4 CC reinforced with approved design / drawing of the work and as per direction of Engineer Incharge .

Supply and fixing of fully Retro Reflective sign board made of 4 mm thick aluminium sheet face to be fully covered with high Intensity encapsulated lens long types as per colour required. The Retro reflective sheet shall be processed on base Aluminium will be provide with frame of 40 x 40 x 4 mm angle all around cross with proper clamping arranged of fix cantilever structure. The back of the aluminium sheet be powder coated. Rates to be inclusive of all taxes, royalty, VAT etc. all T&P/machine, material and labour required for proper complition of work.

Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (Speed Limit Signs at Curve and Abadi Portion)

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.(Stop Sign Board on Minor Roads at Intersections)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing.( Hazard Sign on Parapet (Left & Right Side))

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing.(Chevron Sign at Curves)

M/s Jagdamba Enterprises

Ashok Kumar Chhabra Constructions Pvt.Ltd.

ABHISHEK ENTERPRISES

M/s Baba Anadeshwar Enterprises