PROVN OF TEMPORARY TOILET BLOCK NEAR GUARD ROOM OF CHINAR AND PROVN OF TEMPORARY BATHROOM BLOCK NEAR GUARD ROOM OF CHINAR AND ADDN/ALTN TO SEWAGE LINE FROM GUARD ROOM TO CHINAR GUEST ROOM UNDER AGE B/R (CENTRAL) OF GE (WEST) COLABA, MUMBAI

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out soft loose soil, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide & n. exc 1.5m in depth for foundation etc and getting out in soft soil soll, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide & n. exc 1.5m in depth for foundation etc and getting out in soft disintigrated rock, complete all as specified and directed.

M&L Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and directed.

M&L Brick work with sub class ‘B’ old sized bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

M&L Brick work with sub class ‘B’ old sized bricks, in half brick built in cement mortar 1:4, complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers not exc 25mm thick, complete all as specified and directed.

Removing excavation materials n.exc 5 km and depositing where directed a level n exc 1.50 km above the starting point, complete all as specified and directed.

M&L Damp proof course In cement concrete 1:2:4, type B-0 40mm thick to horizontal or vertical surfaces including necessary formwork, complete all as specified and directed.

S&F Rolled mild steel in roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, Tee, Angle, Channel or flats sections) including cleats and distance pieces using steel of grade Fe 290 (Gde E-165), complete all as specified and directed.

M&L for preparation of new untreated steel surface of any description exc 10cm width or girth applying two coats of black Japan paint over a coat of red oxide primer, complete all as specified and directed.

M&L for Pre- painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardanand fixed in position with MS holdfast/lugs/SSdashfasteners of required dia andlength complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&f A Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 200 mm aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and shiding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S/F 100 mm butt hinges, medium weight, extruded aluminium alloy with galvanised mild steel hinge type B-22, complete all as specified and directed.

S&F aluminium, anodized 200mm long barrel tower bolts of extruded section, complete all as specified and directed.

S & F extruded aluminium anodised alloy handles, fabricated type, size of handle 150 mm, complete all as specified and directed.

S&F for aluminum section for door and window, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs cleats rollers, handles, loking arrangement etc. including all accessories such all glazings clips, and rubber bandings for fixing glass panes in frame complete all as specified. Note:- (i) Glass panes will be measured & paid separately. (ii) The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately. (iii) windows all around will be sealed with silicon sealant.

M&L for 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in lintels Cills, Steps, Plinth courses, Railings, Copings, Bed plates, kerbs etc. inlcuding weathering slightly rounded or champfered angles and throating etc, complete all as specified and directed.

M&L Rendering 12mm thick in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work finished even and smooth without using extra cement, complete all as specified and directed.

Material and Labour for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed.

Spreading and leveling in layer not exc 25 cm thick well ramming including watering as required, complete all as specified and directed.

M&L Broken stone or boulder hardcore of gauge n exc. 63mm, deposited, spread and leveled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M & L PCC 1:5:10 type E-2 (40 mm graded aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in leveling& sub base course in floor and mass concrete, complete all as specified and directed.

M & L for RCC work Type B-1, 1:2:4 as in slab supported on wall, roof, landing, balconies, deck slab, shelves, columns, beams, slabs, chajja, railing in using 20 mm nominal size crushed stone aggregate (up to any height), complete all as specified and directed.

M&L TMT bars 10mm dia and over cut to length bent to shape required including cranking and bending etc and binding with MS wire (annelaed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Use and waste of Formwork to sides of pillars posts, struts, pillars, columns, similar work etc, complete all as specified and directed.

S&F Vitreous China urinal flat back size 465x355x265mm white with grating and union for discarge pipe complete incl fixing plug, bedding, urinal against wall in CM 1:2 securing urinal to plug pointing around back in cement fixing autometic flushing cistern with bracket flush pipe grating and union for discharge pipe etc, complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile n exceeding 0.06 sqm but exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including screed bed or bedding layers of cement mortor (1:4) 15 mm thick for laying of floor, complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 600mmx 300mmx7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including rendering of CM (1:3) 10mm thick on brick or concrete work, complete all as specified and directed.

M & L 75 mm thick PCC 1:3:6 type C-2 (40 mm graded stone aggt)as in plinth protection/foot path etc. finished even and smooth without using extra cement, complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour, complete all as specified and directed.

S&F Plastic water closet seat cover white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F PVC low level flushing cistern 10 ltrs capacity, white symphonic action with ball valve, float and handle including flush pipe and brackets, complete all as specified and directed.

S&F Health faucet all as specified and directed by EIC, complete all as specified and directed.

S&F SS toilet paper holder as approved by Engineer-in-Charge, complete all as specified and directed.

S&F Designer mirror size 450mmx600mm of make Parryware with border matching, any design or as approved by Engineer - in -Charge, complete all as specified and directed.

Supply & fixing in repairs vitreous china white wash basin flat back size 550 x 400mm including coupling 32mm dia, waste pipe, and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand, complete all as specified and directed.

S&F PVC connection 450mm long with two brass coupline pipe of 15mm dia of pressure tating 6kgs/Cm2, complete all as specified and directed.

S&F Grating doom 100mm dia PT MT weight 25gms, complete all as specified and directed.

S&F Tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 15 mm bore, complete all as specified and directed.

S&F Tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 20 mm bore, complete all as specified and directed.

S&F Stop valve 15mm bore, fancy type cast copper alloy chromium plated, screwed down, high pressure, with crutch or butter- fly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F 15mm dia stop/angle valve, cost copper allow screwed down high pressure with captain or butter fly handle, screwed both ends for iron pipes or for unions and fixed, complete all as specified and directed.

S&F 15mm bore pillar taps chromium plated cast copper allow fancy type with screwed shancks and fixed, complete all as specified and directed.

S&F 15mm dia bib taps, cast copper alloy with crutch or butter fly and screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F 2000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.

S&F for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc, complete all as specified and directed.

M&L for 100mm dia Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F PVC (SWR) Gully trap 125/100 mm setting and jointing with solvent cement, complete all as specified and directed.

S&F PVC (SWR) 110mm dia pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) 110mm WC connector with lip ring, complete all as specified and directed.

S&F PVC (SWR) 110mm dia bends any radius, complete all as specified and directed.

S&F Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc, complete all as directed and specified.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

Excavation over areas, n.exc 1.50 m deep and getting out in soft loose soil, complete all as specified and directed.

Excavation over areas, n.exc 1.50 m deep and getting out in soft disintegrated rock, complete all as specified and directed.

Excavation over areas exc 1.50m deep and n.exc 3.0m deep and getting out in soft disintegrated rock, complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide & exc 1.5m in depth for foundation etc and getting out in soft disintigrated rock, complete all as specified and directed.

M&L Brick work with sub class ‘B’ old sized bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in concrete bed 300mm bore of pipe including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

M&L for 300mm bore (internal dia of pipe) reinforced concrete pipes, Class NP3 laid in trenches and jointed with CM (1:1), complete all as specified and directed.

Returning, filling in including spreading levelling, watering and well ramming in layers n.exc 25 cm using soft disintegrated rocks, complete all as specified and directed.

Removing excavated material of soft disintegrated rocks exc. 1.50 km but n exc.15km and depositing outside Md land, Complete all as specified by Engr in charge.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate in surface channel drains, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds etc, complete all as specified and directed.

M&L for Precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs including necessary form work etc for manholes covers set in CM 1:4 (reinforcement measured seperately), complete all as specified and directed.

M&L for Rending 10 mm thick in CM 1:4 on concrete surfaces (internal surface of manhole) and finished even and smooth using extra cement complete with WPC (WPC measured and paid seperately)

Supply only Liquid water proofing compound, complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains of 300 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, cassing and capping with accessories, incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note:- Switch, socket and fan regulators to be measured and paid for separately.

Description all as per Srl item No. 76 here in before but for socket outlet point 5 Amp on same board.

Description all as per Srl item No. 76 here in before but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No. 76 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point).

Supply and fixing modular switch 1 way 6 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame, complete all as specified and directed.

Supply and fixing modular switch 1 way 16 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame, complete all as specified and directed.

Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz, AC supply, ISI Marked, with cover plate, complete all as specified and directed.

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz, AC supply, ISI Marked, with white cover plate with frame, complete all as specified and directed.

Supply and fixing modular sockets 16A/20A, 2/3 pin combined 2 module 230/250 Volts, 50 Hz, air conconditioner AC supply, ISI Marked, with white cover plate with frame, complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete pre wired fixed to wall with 2 nos PVC block of suitable size, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 10W, 220V, AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete pre wired fixed to wall with 2 nos PVC block of suitable size, complete all as specified and directed.

S&F Exhaust fan 230 volts, 300mm, plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall, complete all as specified and directed.

S&F Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed.

Supply and fixed MCB Distribution board, 240 volts single pole and neutral, single door, sheet steel enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, complete all as specified and directed.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series, complete all as specified and directed.

Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's, complete all as specified and directed.

Material & Labour for Sub main wiring with two run single core of 6 sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20mm dia concealed on wall/ceiling in PVC conduit medium grade ISI marked with all accessories such as Tee, elbows, junction boxes etc. as required fixed on wall along with one run of 6 sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion, complete all as specified and directed. Note:- (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine. (iii) Necessary plastering in the disturbed surfaces of wall and distempering / white wasing to match the exisiting colour shall be included in the unit rate quoted.

M&L for Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr deep below normal ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab 30 cm x 30 cm x 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work, filling and excess earth removal in any type of soil and including necessary testing on completion all as shown in Electrical Plate No 3 of SSR part -I, complete all as specified and directed.