Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAccepted-Finance 68A MOOLAKKOUNDANPUTHUR KANGEYAM TALUK TIRUPPUR 638 105 | TIRUPPUR | TAMIL NADU | 638105 | L1 | Accepted-Finance Bidder Quoted Value is less than the Estimate Value. | |
| 2 | L2₹3.0 L+₹2,249.84 (0.77%)Rejected-Finance | L2 | Rejected-Finance Bidder Quoted Value is more than the Estimate Value. |
Tender Value
₹3 L
EMD Value
₹6,000
Closing Date
22 Nov 2024, 3:00 pmClosed
Assistant Commissioner
Zone.3 Nallur, Tiruppur City Municipal Corporation.
Providing Pipe Culvert across the Canal at Balaji Nagar 4th Cross Street in Ward No.59.
2024_MAWS_501961_43
34 / 2024-25 / Z3
Open Tender
Civil Works
Item Rate
90 days
TIRUPPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹6,000
18 Jun 2025
17 Nov 2024
22 Nov 2024
17 Nov 2024
22 Nov 2024
17 Nov 2024
Amount
Earthwork excavation for foundation in all soils and sub soils except in hard rock requiring blasting and depositing on bank with initial lead of 10m and initial lift of 2m inclusive of shoring, shuttering, bailing out water wherever necessary, refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth within the compound in place shown by the departmental officers and clearing and levelling the site etc,. complete.
Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification.
Supplying and erecting centering including necessary supports for the plane surfaces such as Drainage & Culvert Retaining walls etc., using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding supported by casurina props of 10cm to 13cm dia spaced at suitable intervals etc., complete complying with standard specification.(For Drain Above 1m - 2m)
Supplying, fabricating and placing in position of Steel Reinforcement using Mild Steel or Ribbed Tor steel bars for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete complying with standard specification.
Supply and delivery of 900mm dia RCC non pressure spun pipe NP3 class with socket and spigot ends as per IS 458/2003 manufactured with sulphate resistant cement with 12 mm HI -alumina lining provided for rubber ring joints etc., complete complying with standard specification.
Lowering of 900mm dia RCC pipes and specials into the trenches and laying to proper grade and alignment etc complete.,
Jointing of 900mm inner dia RCC pipes with cement using necessary collars including the cost of jointing materials.
Providing and laying in position standardised concrete mix M-20 Grade in accordance with IS 456-2000 using 20mm and down graded hard broken jelly for all RCC items of works with minimum cement content of 3250kg/10cum and maximum water cement ratio of 0.50 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum) 7730kg of 20mm machine crushed stone jelly and with about (3.30cm) 5156kg of 10-12mm machine crushed stone jelly and with about (4.79cum) 7760kg of M-Sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing etc and providing fixtures like fan clamps in the RCC floor / Roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and directed by the departmental officers. The Coarse and fine aggregates to be used should comply with the requirements of IS standards.
Brick work In CM 1:5 mix using best Second Class Table Moulded Chamber Burnt Bricks 9"x4½"x3" having 350 kg/cm² compressive strength and 15% or less water absorbent in the period of 24hours immersement and confirming to ISI specifications including finishing, curing etc., complete complying with standard specification.
Plastering with cement mortar 1:5 mix (one cement five P-sand), 12mm thick in all floors using clean screened M-Sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.
Add G.S.T. @ 18%
SUDHEKSHA CONSTRUCTION (BID ID -1190896)
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .