Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹27.9 L+₹1.9 L (7.40%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹28.8 L+₹2.9 L (11.0%)Rejected-Finance 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹29.4 L+₹3.4 L (13.1%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹30.6 L+₹4.6 L (17.9%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹40.4 L
EMD Value
₹80,860
Closing Date
10 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAMS
GE NAMS AMRITSAAR
SPL REPAIR IN BLDG NO P-6E INCL BATHROOMS OF ARMD REGT AND OTHER SANCTIONED WORK AT NAMS
2023_MES_618656_2
GE NAMS-62/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE NAMS
CLASS D CATEGORY a(i)
8 documents required · 8 mandatory
₹500
GE NAMS
₹80,860
Yes
7 Dec 2023
20 Oct 2023
17 Nov 2023
20 Oct 2023
10 Nov 2023
27 Oct 2023
Amount
M&L for brickwork with sub class 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete incl demolition of brickwork /stone built in cement mortar etc. disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.
Description all as per Ser Item No 1.00 above here in but except bricks.
M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete incl demolition of brickwork /stone built in cement mortar etc., disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC. complete all as specified and directed.
Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc & dispose off debris where directed by EIC complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed.
M&L for two coat of oil bound distemper over one coat of primer on new plasterd surfaces of walls, pillars cornces etc incl prepartion of new plastered surfaces through electrical operated grinder complete all as specified and directed.
M&L for Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish even and fair as per user manual complete all as specified and directed.
M&L for Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish even and fair incl WPC as per user manual complete all as specified and directed. (WPC shall be measuared seperatly and paid @ 200ML for 50kg cement bags or as per manufacturer's instructions).
Supply only liquid WPC complete all as specified.
M&L for applying two coats of cement base paints over one coat of primer on walls etc, incl preparing new surfaces of walls complete all as directed .
M&L for Rendering 10mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement complete all as specified and directed.
M & L for three coat of white wash incl preparation of new plaster surface of ceiling complete all as specified and directed.
M&L for applying one coats of cement base paints on walls etc, including preparation of old surface complete all as speated.
M&L for applying one coats of oil bound distemper on walls etc, including preparation of old surface complete all as speated.
M&L for applying one coats of white wash on ceiling including preparation of old surface complete all as speated.
M & L for one coat of synthetic enamel paint on steel surface incl preparation of old steel surface width or girth exc 10cm all as specified and directed.
M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.
M & L for repair to RCC Chajjas, roof projection edges ,hanging part of chajjas, edges of chajjas, RCC papafeets, under the roof / floor slabs with PCC 1:2:4 (using 12.5mm crushed graded agg) incl neccasary renforcement 8mm to 12mm TMT bars , form work, MS wire mesh for bounding the concrete on ground required and plaster work in CM 1:3 & periodical services to match with the existing surfaces finishing at any height of buildings etc completed all as specified and directed by Engr-in-Charge.
S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed.
S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples / beading complete all as specified and directed..
S&F in replacement for rotational moulded polythene 500 litres water storage tanks cylindrical vertical with closed top hoisted and fixed in position inclusive 20 mm dia float valve with aluminium fitting. All as specified and directed including old disconnecting and taking down complete all as specified and directed.
Description all as per Item Ser No 21.00 above but 1000 litres water storage tanks.
M & L for PCC 1:2:4 type B-O (using 12.50 mm graded aggregate) in sub base of flooring including demolition and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC.
M&L for non skid ceramic any coloured/printed tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles, over 15 mm thick rendering as screed bed in cement mortar (1:4) in floors, incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.
Description all as per item Ser No 24.00 above but area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floors & dado etc complete all as specified and directed.
M&L for glazed ceramic coloured/printed/ dark tiles size 300x200mm x7 mm thick on vertical surface in skirting /dado ,set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and smooth without using extra cement complete, shade & design as approved by EIC/GE, incl dismantling and rubbish off the primises etc all as specified and directed.
Description all as per item Ser No 26.00 above but size 300x450 mm on vertical surface in skirting /dado etc.
M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling and disposal of unserviceable material, debris and rubbish to a distance exc 100m as directed by the EIC complete all as specified and directed.
S&F in repair 18/19 mm prelaminated particle board, prelaminated both side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber/steel frame work dismantling and disposal of unserviceable material, debris and rubbish to a distance exc 100m as directed by the EIC complete all as specified and directed.
M&L 50 mm thick cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection and laid in panel complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight incl dismantling / demolition and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC., complete all as specified and directed.all as specified and directed.
M&L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in hold fast etc including necessary form work complete all as specified and directed.
S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.
Description all as per item Ser No 32.00 above but laid in trench or in floor
Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints 75 mm dia fixed to walls or laid in floor trenches etc incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.
S&F for 110mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed. .
S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed. .
S&F PVC (SWR) junction single, (single T) equal or unequal 110mm dia with access door
S&F PVC(SWR) vent cowl 110mm dia
M&L for PVC(SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 110mm dia
S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors incl taking down old pipe complete all as specifed and dirtected.
S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc incl taking down old pipe complete all as specifed and dirtected.
S&F for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc complete incl taking down old pipe complete all as specifed and dirtected..
S&F for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured)
S&F 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured)
M&L, for rendering 10mm thick in CM 1:3 with WPC in sunken slab cornics chajja edages incl cleaning of surfaces complete all as specified and directed.
M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed.
M&L, cement concrete 1:7:12 (40 mm graded aggregate ) in lean concrete including demolition complete all as specified and directed.
M&L for pointing to brick tiles in CM 1:3 laid flat in roofing incl racking out joints complete all as specified .
Refixing of shutter in the same opening exc 1 Sqm and not exceeding 2 Sqm each.
Refixing of shutter in the same opening exc 2 Sqm but nexc 4 sqm each .
M & L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete (Fe 410-W (Gde-E-250) quality A)incl dismantling of old all as specified and directed.
S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl taking down shutter & two coat of synthetic enamel paint over a coat of pink primer on wooden surface and cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface and the following builders hardware contain each shutter :- (i) Three x MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or screwed as required. (ii) Two x aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked). (iii) Two x aluminum handles cast type anodized 150mm long (ISI Marked). (iv) Two x aluminium alloy, anodised, sliding door bolt of 250mm long & 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, complete all as specified and directed.
S&F for 2nd class hard wood glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.24(a) and fitted to chowkahts fixed with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with wire staples or wooden beads incl taking down shutter and two coat of synthetic enamel paint over a coat of pink primer on wooden surface & cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B1 /cement plaster 1:4 as require and make finish good to the existing surface & incl the following builders hardware contain each shutter :- (i) Three x MS butt hinges, cold rolled mild steel 100mm long (ISI Marked) with welded or screwed as required. (ii) Two x aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked). (iii) Two x aluminum handles cast type anodized 150mm long (ISI Marked). (iv) One x aluminium alloy, anodised, sliding door bolt of 250mm long & 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.
S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl taking down old shutter complete all as specified and directed complete all as specified and directed.
S & F for butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, 75mm, type C-21 complete all as specified and directed.
S&F for aluminum handles cast type anodized 100 mm long (ISI Marked) complete all as specified and directed.
S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.
M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 08 mm square guard bar, 10 cm centre to centre. (viii) 25x4 mm flat iron all around for joint of both frame. (ix) stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples & 3mm thick, sheet glass ordinary quality and glazing with oil putty .(x) Two coat of synthetic enamel paint over a coat of red oxide primer to MS window and guard bar. Note : Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.
S&F in repair for door closer hydrulicacally,alluminium regulated designation No 1 universal type suitable for door shutter complete all as specified and directed.
S&F for 15 mm bor GI tube medium grade freed to wall or under floor incl taking up or down old tube complete including cutting chases and make good in CM 1:3 complete all as specified and directed.
S& F in repair 20 mm bore G.I tubing in new or old location (wall/Roof) with all fittings incl taking up or down old tube complete all as specified and directed.
Fixing only in repair steel tubing and connection 20 mm dia bore to wall and laid in floors incl taking up or down old tube and cleaning for refixing .
S & F in repair Bib tap CP fancy type/long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.
S & F in repair Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.
S & F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.
S& F for in repair swan neck pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed .
S&F in repair PVC waste pipe 32 mm to 40 mm dia (corrugated) for wash hand basin/sink fixed in repair complete all as specified and directed.
S&F in repair for PVC connections for 15mm bore pipe 45cm long superior quality with PTMT nut on both sidecomplete all as specified and directed.
S&F in repair for CP fancy type 100mm size chromium plated shower roses with or without swivel joints ,any size including fixsing to steel pipe or union complete all as specified and directed.
S&F in repair 10 ltr capacity low levels flushing cistern with PVC bend and PVC flush down pipe etc complete all as specified and directed
S & F in repair for viterous china squating pan of (Orissa Pattern) size 580 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.
S & F in repair for viterous china wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed.
S & F in repair for viterous china wash hand basin white flat back size 550 x 400 mm with leg incl CP waste coupling, waste pipe & plug and porclain stopper brackets and cutting for and pinning in ends of brackets or erceting stand fixed complete all as specified and directed.
S&F in repair hole wash basin mixer 15 mm bore (fancy type) cast copper alloy with capstan head without popup wastage system with 450 mm long braided hoses complete all as specified and directed .
S & F in repair wall mixer 15 mm bore (fancy type) cast copper alloy with capstan head,CP screwed down high pressure with long screwed both ends for iron pipe as per union complete all as specified and directed.
S & F in repair vitreous china ware over counter ovel wash hand basin, any colour, size 570 x 450 mm size including cutting for and pinning ends of brackets or erecting stand including fixing waste pipe , CP waste coupling & bottle trap all as specified and approved by Enger-in-Charge.
M & L toilet paper holder stainless steel recessed type complete all as specified and directed
S&F corner glass 300X300mm shelf brass chromium plated of 10mm thick with bracket compleate all as specified and directed.
S&F glass shelf (500x125mm) with brass bracket compleate all as specified and directed.
S&F in repair Ball valves brass insert ,bore size 20mm fixed with GI pipe all as specified and directed.
S & F in repair vitreous china urinals, half stall type (420 x 395 x 635 mm) , complete including providing and fixing , bedding urinal against wall in cement mortar 1:2 , pointing around urinal back in cement , grating and union for discharge pipe, CP urinal spreader and fitting with bottel trap & CP waste coupling all as specified and approved by Enger-in-Charge.
S&F Aluminum Curtain Rods powder coated 25mm dia with brackets including screws fixing of walls complete all specified and directed.
M & L for applying two coat of undiluted thick coat of acrlic reinforcement liquid applied elastorneric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) Note: Every each coat gap between 6 hrs) complete all as specified and directed by Engineer -in-charge, Make : Asian paint, Sika, Fosroc etc..
M&L 25mm thick Cement concrete type B-0, 1:2:4 (12.50 mm graded aggregate)including prepration of old surface, scraping , washing, boorming, chipping on roof surface etc complete all as specified and direct by Engineer-in -charge.
M & L for TMT bars 10 mm dia and over cut to length bent to shape reqd. incluing cranking, bending and binding with ms wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified
S&F for 75mm bore PVC bends/junction any radius complete all as specified and directed. .
M/L reinforced cement concrete (1:2:4) type B-1using 20mm graded stone aggregate as in shelves slab and finishing exposed surfaces fair & even incl necessary all form work with rough finished surface of concrete all as specified.
S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties)
S&F in repair MS 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete
S&F in repair Floor door stopper of aluminium with hard drawn steel spring,fixed in floor Overall length of cover plate 140mm complete
Taking down carefully the existing aluminium/copper point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches , sockets , ceiling rose , regilators and light fitting any type etc by unscrewing and taken away from site complete.
M & L for Point wiring in replacement with 1.5 Sqmm (Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable in and incl old PVC concealed conduit not less than 20 mm dia 1.5 mm thick for one light / fan point controlled by one switch (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick hylem sheet top cover, sheet screws and 1.6 mm thick GI sunken boxes included 1.5 sqmm stranded copper conductor with green PVC insulation earth contunity conductor connected to comman earth dolly etc. complete all as specified and directed for the following:- NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate)
One light / Fan point/ Exhaust fan point controlled by one 6 Amp switch one way.
One switch socket point 5 Amp on the Independent board complete all as specified
One switch socket point 5 Amp on the same board completeall as specified
Description all as per Srl item No 95.00 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 16 Amp on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete.
Supply and fixing switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed.
Supply and Fixing socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed
Supply and Fixing switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed
Supply and Fixing socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed
Supply and Fixing switch type regulator 5 step 230 volts AC complete all as specified and as directed
Supply and fixing ceiling rose 65/50 mm two to three terminals complete all as specified.
Supply and fix in replacement MCB 40 Amps single pole with neutral, AC 230 Volts 'C' curve complete all As specified and directed.
Supply and fix in replacement MCBs single pole (SP) 5 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.
Supply and fix in replacement MCB 40 Amps single pole AC 230 Volts 'C' curve complete all As specified and directed.
Supply and fixing in replacement Sheet metal enclosure for DB's when MCB's to be used double door factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 12 ways complete all as specified
Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with louvrers and shutters including making and finishing good hole in wall for fixing Exhaust fan of 300 mm sweep including necessary brick work and plaster to match the existing surface complete all as specified.
Supply , laying & fixing double wall corrugated (DWC) pipes made of high density polythylene(HDPE) with all accessories i.e. all types of joints , sockets , elbows , bends and end cap etc of size 75 mm outer dia and 61 mm inner dia complete all as specified and directed. MAKE :- Telerex/ tirupati or E-in-C approved make
S&F in LED optic fitting 1x9/10 watt 2 feet LED light fitting mirror type with high output diffuser aluminium housing 2 feet , 10 watt 220 v AC decorative type with driver including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing in LED T-8 tube light fitting with sinle side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated twin core 23/0.0076 ywisted copper cable from ceiling rode to light fitting complete all as specified and directed.
Material and labour for replacement of lamp holder insulated body with back plate batten/angle type for batten fitting with LED Bulb 230V AC 10 watt cool day light 6500K complete all as specified.
Supply & fix in replacement of LED Street Light Luminaire 36 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens.
Supply and fixing in replacement of security light mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat of size 40 x 6 mm and nuts and bolts and painting with aluminium paint,all as direced by Engr in Charge
M&L in replacement of two single core sub main wiring 6 Sqmm multi-strand PVC insulated copper conductor FR cable including PVC insulated copper conductor cable of size 6 Sqmm single core as cotinuous earth wire connecting to common earth including PVC conduit 25mm dia medium grade , connections of cable with MCBs or bus bars complete all as specified and directed. Note : Three runs of 6 Sqmm cable and PVC conduit shall be measured as one unit.
Suply, laying and testing in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm 3.5 core
M&L for road cutting including excavation and getting out , returning filling in sprading leveling and well rsmming in layers , soiling with broker builders or quarried stone , inter stices filled , 7.5 cm thick (compacted thickness ) WBM ( water bound macadam) with coarse aggregate retreived from road cutting consolidated to required gradient and camber , including applying evenly a priming /tack coat with bituminous primer and making surface even and getting our surplus soil complete all as specified and as directed.
Supply and fixing / laying galvanized iron pipe of 50 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road/ veranda crossing or fixed to wall including painting with two coats of aluminium paint over a coat of red oxide paint complete all as specified and directed.
Supply and fixing in replacement of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 Amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :- (a) MCCB 160 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. (Note:- Out going MCB shall be measured and paid for separately)
Taking down ceiling fan of any make & sweep size by disconnecting clips , lock nuts etc from existing positon of any height , keeping in safe costudy and hanging the same after cleaning and painting of ceiling fan complete with synthetic enamel paint by spraying one coat and marking MES No complete all as specified and directed by engr in charge.
M&L for earthing complete in replacement with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.
Excavation in trenches in any type of soil not exc. 1.5 mtr wide and not exc. 1.5 mtr depth all as specified & directed.
Returning , filing in any type of soil and spreading in layers not exc. 25 cm thick each layer including watering & well ramming complete all as specified and as directed
Removal of surplus soil to a distance not exc. 50 mtr & depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specifed & directed
Supply and installation evaporative desert coolers (steel body) factory made 22 gauge PGI sheet of size 100x70x60cm appx, front and side panels are made of same gauge with wood wool pads having nominal air flow capacity of 4000 cfm, or nearest size, having exhaust fan motor copper wound of capacity 125 to 145 watt with 18" steel blade size, and submersible pump of capacity 15 to 20 watt, and powder coated complete all as specified and directed. Make of fan motor-Crompton Greaves, Bajaj, Khaitan
M&L for fabrication of mild steel stand made out of MS angle iron and flat grade Fe-290-Gde E-165 of size as directed suitable for positioning the desert cooler including painting with two coats of (black) enameled paint cover a coat of red oxide primer and installed at locations complete all as specified and direced by Engineer in charge.
Supply, installation, testing and commissioning of Air Conditioner, Split type, (Indoor, out door unit), single phase, rotary compresser and condenser coil of copper having cooling capacity 4500 K Cal per hour (1.5 ton), BEE rating 4 star or above, with in built air ioniser and Plasma filter for better indoor air quality refregirent type R410A/R32 complete with cordless remote control unit including outdoor stand & refrigereant piping complete all as specified and directed
Supply, installation, testing of voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 130V to 270V with out put voltage stabilized at 230V with accuracy of + 2.5% with time delay system and of capacity 4 KVA complete all as specified.
Supply & fixing single pole and natural enclosure 32 A, 230 V with a two pin and earth plug and socket complete with one single pole MCB 25 A complete all as specified and directed
M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable condorming to IS specifictions, 2 runs of 4 sqmm including 1 run of 4 sqmm single core multistranded copper conductor, PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia regid PVC conduit and conduit accessories fixed on wall/ceiling etc, or concealed in wall and connecting to common earth dolly all as specified and directed. Note : Three run of 4 sqmm cable and PVC conduit shall be measured as one unit.
M & L for Point Wiring complete with 1.5 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specification, drawn through and including PVC conduit 20 mm dia, medium grade concealed/ fixed on wall/ ceiling with suitable clamps, screws, etc or concealed in wall including terminal bosex fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the swithes, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and directed including pressed steel powder coated MS sunken box of suitable size, covered with & including 3 mm thick bakelite, laminated hylem sheet top cover for one 3 pin 5 Amps switch socket on independent board complete all as specified.
Chander Mohan Arora Contractor
M/s Vijay Construction Co.
M/s MAHAJAN CONSTRUCTION CO.
tarvinder singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .