SPECIAL REPAIR TO SMC BUILDING AT 3BRD AF STATION CHANDIGARH UNDER GE (AF) MC CHANDIGARH

Amount

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1: 6 for laying floor finishes including dismantling old complete all as specified and directed

M&L for First Quality, Glazed ceramic coloured tiles 450mm x 300mm x 7mm thick, in vertical surface such in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including rendering 10 mm thick in cement mortar 1:4 on brick walls for laying tiles including dismantling old complete all as specified and directed.

S&F in repair Vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white colour, with integral foot rests (excluding flushing cistern and flush pipe), including 100mm 'P' or 'S' trap including provision on lime/cement concrete bedding complete all as specified and directed.

S&F in repair PVC syphonic action type flushing cistern 10 liters capacity ,low level with inlet ,ball valve float and bracket with complete fitting complete all as specified and directed .

Material and labour for powder coated aluminium (minimum thickness of polyester powder coating 50 micron) work for fixed frame portion and shutters of doors, sliding door (any track), openable/sliding windows, ventilators, partitions sliding/openable with extruded built up standard tubular section/appropriate Z section and other section conforming to IS : 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/neoprene gasket roller etc aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/gauged/paneling, CP brass/stainless steel screws including dismantling old, complete all as specified and directed.

Supply and fix, plain sheet glass 4mm thick, ordinary quality, not exceeding 0.50 Sqm in each pane fixed to aluminium door/window and iron frame including aluminium powder coated snap beading and rubber gasket including dismantling old, complete all as specified and directed.

Supply and fix in repair aluminium anodised powder coated grill (Deco grill) DG 103 of 7.5mm thick with suitable 'F' section No. 8584, 15.3x23.4x1.4mm fabricated and revited to aluminium door/window/ventilator, complete all as specified and directed.

M&L for Brick work with sub class 'B' straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 in any location including demolition of old brick, complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like set in 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding at front edge or both edge including dismantling old complete all as specified and as directed

M&L for rendering 15mm thick in cement mortar 1:6 on brick/concrete surfaces finished even and smooth without using extra cement including taking down complete all as specifed and as directed

M&L for rendering 10 mm thick in cement mortar (1:3) on ceiling, of building and finished the surface even and smooth without using extra cement including taking down , complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and directed..

M&L for preparation of new plastered surface of ceiling and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and directed..

Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

Demolition of (un-reinforced) cement concrete in ground floor and paving not exceeding 15cm thickness (below or above ground level) and removing the debries outside MoD land, complete all as specified and as directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed

Material and labour for cement concrete (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregate, as in roof kerb, mud stops, benching , including use and waste necessary form work, complete all as specified and directed

Material and labour for rendering 10mm thick in cement mortar (1:3) using WPC @ 0.200ML per 50Kg bag of cement on surfaces of roof and parapet, finished even & fair without using extra cement, complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Material and labour for applying a coat of bitumen primer @ 0.3Kg/Sqm conforming to IS 3384 and laying 3mm thick APP modified water proofing membrane reinforced with non woven polyster matt having softening point not less than 150 degree centigrade, having tensile strength 650 N/Sqcm in longitudinal and 400 N/Sqcm in transverse direction by torch method with minimum 100mm side lap and 150mm end lap followed by application of a coat of hot blown bitumen 85/25 grade @ 1.2Kg/Sqm , complete all as specified and as directed. NOTE: The water proofing treatment shall be carried out by the Authorised applicator of the Manufacturers.

Material and Labour for applying two coats of solar reflective bituminious aluminium paint over APP membrane @ 0.20Kg/Sqm for two coats, complete all specified and directed.

S&F in repairs 15mm dia bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc complete all as specified and directed..

S & F GI water tubes, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, surface ,cancealed, ceiling or laid in floors complete all as specified and directed.

S&F in repair 15 mm Bib taps fancy type cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore fixed complete all as specified and directed .

Supply and fix, stainless steel butt hinges, 100mm long complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 150mm in size fixed with screws complete all as specified and directed.

Supply and Fixing, Aluminium anodised, barrel tower bolts 150mm long, powder coated, of extruded section and fixed, complete all as specified and directed.

Supply and Fixing in repair 12mm thick commercial plywood made with 07 number ply, grade BWR type BB fixed with screw to timber frame work including 1st class hard wood leaping all around the shutter/edges and with and including 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern fixed with approved adhesive as per manufacturer instruction, complete all as specified and directed.

S&F in repair for CP Toilet paper holder along with cover of stainless steel suitable for 120mm width and 100mm depth paper complete all as specified and directed.

S&F in repair stainless steel soap dish fixed to wall complete all as specified and directed.

S&F in repirs stainless steel tubular Towel rail 20 mm dia and 60 cm long complete all as specified and directed.

S&F in repair of Drapery rod/ curtain rod 25 mm diameter ,stainless steel ( 304 grade) of thickness 20 gauge with standard type socket including brackets, side stainless steel dom , wall to wall complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia of lengh 900 mm long complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of lengh 450 mm long complete all as specified and directed.

S&F in repair chromium plated brass health faucet (hand shower) with 8mm dia 1 metre long flexible tube wall mounted/hooked complete all as specified and directed.

S&F in repair 15mm bore bib cock two way brass chromium plated complete all as specified and directed.

S&F in repair 15 mm dia Fancy type Pillar Taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or with out lettered Hot and Cold with long screwed complete all as specified and directed

S&F in repair Vitreous china wash hand basin ivory ,flat back size 550 mm X 400 mm including bracket cutting in wall and pinning in ends of bracket or erecting stand with PCC 1:2:4 Type B1 using 20 mm graded crushed stone aggregate , including waste coupling and waste pipes complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling and PVC waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever 03 nos brackets of angle 30mmx30mm ,thickness 3-4mm,500mm long with PCC 1:2:4 B0 in wall and connecting union to pipe overall size 914mm x 460mm bowl size 410mm x 330mm x 203mm fixed complete all as specified and directed

Note:- Amount of credit of Rs.9560.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

Anil Kumar Gupta

M/s Bhagwati Enterprises

SS BUILDERS