SPECIAL REPAIR TO BLDG NO P-3/2 BGCOF FD WKSP BLDG NO T-6/9 OR MESS OF DOU AND BLDG NO P-19/9 TO P-19/16 08 QTRS AT TAWI COMPLEX UNDER GE SATWARI

Amount

Note :- 1. Work will be carried out upto 4th storey of bldgs also as per direction of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account.

Demolition of cement concrete of any description and in any position and removing the rubbish from the work site out side defence premises complete all as specified and as directed.

Demolition of reinforced cement concrete of any discription ground to 4th floors and removing the rubbish from the work site out side defence premises complete all as specified.

Dismantling of brick tiles or terracing tiles, single layer on roofs including mud etc complete all as speciified and as directed and removing outside defence premises.

Dismantling timber scantlings 40 sq. cm and over in section, in any position ( framed work) complete all as specified.

Dismantling timber scantlings under 40 sq. cm in section,in fillets, rails, posts, rafters, purlins, etc in any position (framed work) complete all as specified.

Rolled mid steel in Roof truss (framed), trussed, purlins, crane grantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) includuing distance pieces, cleats etc (Fe-410-Grade (E-250) quality-A).

75 mm thickness PCC 1:2:4 type -B-2 (40 mm graded crushed stone aggregate) complete all as specified and directed.

Plain cement concrete (1:4:8), type D-2 (using 40 mm graded crushed stone aggregate) nominal mix, 75 mm thick, as in sub base of floors, finished even and fair complete all as specified and as directed by Engineer-in-charge.

PCC 1:2:4 type B0 (20mm graded stone aggregate) 25mm thick as in floor and finished rough to recive the floor tiles etc complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding ashlar facing dressed stone work and precast concrete article complete all as specified and as directed.

Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified and as directed.

Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls or stone walls etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. (Note :- Work will be carried out up to 4th storey with necessary scaffolding).

Rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4, rendering is to be finished even and smooth without using extra cement (up to 4th storey with necessary scaffolding) complete all as specified and as directed by Engineer-in-charge.

Rendering 10 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:6 , rendering is to be finished even and fair without using extra cement complete all as specified and as directed.

Rendering 10 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar 1:3, rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

Preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over two coat of plaster of paris putty of 2 mm thick and one coat of primer complete all as specified and as directed.

Applying two coats of oil bound distemper on old surfaces of walls over 2 mm thick plaster of paris putty including complete removal of existing treatment and preparation of surfaces complete all as specified.

Preparation of new plastered/ concrete surfaces of walls and applying two coats of cement base paint over and including one coat of primer (up to 4th storey with necessary scaffolding) complete all as specified and as directed.

Preparation of old decorated plastered/concrete/brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation and removing all soot, moss, grease etc.

Preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.

Applying two coats of white wash on old surfaces of ceiling including preparation of surfaces etc complete all as specified and directed.

Taking down chowkats or frames (without taking down shutter from the frame) not exceeding 1.5 Sqm each complete all as specified.

Taking down chowkats or frames (without taking off shutter from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified.

Factory made steel windows double shutter box type (Glazed & Wire Gauze), outer frame made out of ERW TUBE 'P' section (65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required. Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs complete all as specified and as directed.

Ditto all as per item No. 27 but in ventilator.

Framed work such as grills grating etc with ends of bars shouldered and /or riveted , or forged into spike; framed guard bars, barred iron doors, leaders, framed balusters, walk ways, railings framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and as directed.

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples, supply and fixing in repair, complete all as specified and as directed.

Sheet glass ordinary quality 3mm thick and glazed with silicone sealant adhesive or any type of beads in square n.exc 0.5 Sqm each pane in any type of frame of Iron/ Steel/ Wood/ Aluminium as required at site complete all as specified.

3 mm thick figured glass, pin head type and glazing with silicone sealant adhesive or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site (upto fourth storey with necessary scaffolding), all as specified.

Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.

Securing glass of any description in existing wooden and iron frames glazed with silicone sealant adhesive/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying with silicone sealant adhesive (New length of frame reputtied shall be measured).

Preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer including necessary rubbing with sand paper or grinded by hand grinder to achieve smooth and even surface

Applying one coat of synthetic enamel paint to old painted steel surfaces of any description having width/girth exceeding 10 cm complete all as specifie including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where required complete all as specified and as directed.

Preparation of new or previously untreated wood or wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer including necessary putty filling with knife of same colour where required to achieve smooth and even surfaces complete all as specified and as directed.

Applying one coat of synthetic enamel paint to old painted wood surfaces of any description having width/girth exceeding 10 cm complete all asspecifie including preparation and necessary filling by chalk, putty as and where required to make surface even and smooth complete all as specified and as directed.

Pressed steel frame of size 105mm x 60mm made out of 1.25mm sheet for doors single rebated including mild steel hinges medium weight 100mm long and 25mm x 3mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I including applying two coats of existing surface finishes of the building complete all as specified and as directed.

Pressed steel frame of size 125mm x 60mm made out of 1.25mm sheet for doors double rebated including mild steel hinges medium weight 100mm long and 25mm x 3mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I including applying two coats of existing surface finishes of the building complete all as specified and as directed.

35mm thick 2nd class HW factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply. The size of rail and stile as per IS:1003 (Part-I), all as directed by Engr-in-Charge.

35mm thick 2nd class hard wood glazed, gauzed and skelton shutters open rebeated and prepare to recive glass but dived into square with plain chamfered or rounded mitrd and rebeated sash bars stiles and rails as specifed in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified and as directed.

Aluminium anodised barrel tower bolt of extruded section of size 125mm (ISI marked) complete all as specified and as directed.

Aluminium anodised handles 125mm size all as specified and directed (ISI marked) complete all as specified and as directed.

250mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed (ISI Marked)

100mm long butt hinges extruded alumn alloy with galvanised mild steel hinge pin, anodized and fixed complete all specified (ISI Marked)

Stainless steel Butt hinges, 100mm, complete all as specified and as directed (ISI Marked)

Hasp & staple safety type aluminium anodised with mild steel hinges Spin including bolt to hinges plate fixed with screws of 75 mm in length.

Reinforced Cement concrete M-25 (Design Mix) (20 mm graded aggregates) as in beams, cantileveres, bressummers, lintels over 1.5 m span complete all as specified and as directed.

Use and waist for formwork to sides and soffits of floor or room beams, beams haunchings, girders, bressummers, lintels, cantilevers, shelves includings supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete complete all as specified and as directed.

Use and waist for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or slopping) rough finished flat surfaces complete all as specified and as directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. (Column footing, Column and PB) complete all as specified and as directed.

Mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Reinforced Cement concrete M-25 (Design Mix) (20 mm graded aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed.

Taking up or down steel tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store complete all as specified and as directed.

GI tubes 'medium grade' galvanised, 15 mm bore, ISI marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

GI tubes 'medium grade' galvanised, 20 mm bore, ISI marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing tubes 'medium grade' galvanised, 15 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge

Refixing tubes 'medium grade' galvanised, 20 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.

Dismantling water tanks and removing to store of water storage tanks (Cap. 500 ltr to 1000 ltr ) complete all as specified and directed by Engineer-in-charge.

Rotational moulded polyethylene water storage tanks of 500 litres capacity, (cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position including ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.

Gun metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, Bore dia of 20mm, fixing in repair, complete all as specified and as directed.

75mm thick PCC 1:3:6 type C-1 using 40mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as directed.

Repairing of concrete surfaces such as balcony, chajjas, upward or downward facias, column, Piller, ceiling and similar items with plain cement concret 1:2:4 type B-0 & rendering any thickiness in CM 1:3 without using extra cement finished even and fair complete all as specified and directed. (Up to 4th storey bldg and including necssory formwork and scaffolding required as per site conditions also taking down or dismantiling as required at site).

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing surface with neat cement slurry with 3.0 kg of cement per sq. metre, removing serviceable tiles to store and rubbish off the Cantt area complete all as directed

Vitrified Ceramic (Double Charged) edge cut joint free coloured or printed any shade tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and using 4 mm spacers jointed in neat cement slurry and pointed in white or coloured epoxy grout including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. Make : Sun Hearrt, Kajaria, Somany

Description all as item No 68 but as in vertical surfaces dado/skirting over a backing coat of CM 1:4, 10 mm thick complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.

Non-skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. Make : Sun Hearrt, Kajaria, Somany

Ditto all as per item No 71 but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete.

Glazed ceramic coloured digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 complete all as specified. Make : Somany, Kajaria, Sun Hearrt

PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, supply and fixing in repair, complete all as specified and as directed by Engineer-in-charge. Make:- Cera, Cat No- B1010107 (CABRINA) or equivalent in Jaquar/ Hindware.

Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including self closing seat cover, closed pattern with flat bottom,supply and fixing in repair,complete all as directed. Make:- Cera, Cat Part No- S1051103 or equivalent in Jaquar/ Hindware.

15mm CP Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, supply and fixing in repair,complete all as specified. Make:- Jainko, Essco, Prayag

15mm CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, supply and fixing in repair, complete all as specified. Make:- Jainko, Essco, Prayag

Angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, supply and fixing in repair, complete all as specified. Make:- Jaquar or equivalent in kohler/ Artize.

PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore, supply and fixing in repair. Make:- Prayag, Cat No:- 323 or equivalent in Jainko, Polytuf

PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore, supply and fixing in repair. Make:- Prayag, Cat No:- 324 or equivalent in Jainko, Polytuf

Vitreous China, wash basin white, flat back, size 550mmx400 including brackets of any size, cutting for and pinning in ends of brackets or erecting stand including waste pipe of 32 mm dia, waste coupling of chromium plated brass, supply and fixing in repair, complete all as specified and as directed by Engineer-in-charge. Make :- Cera, Cat No- S2040119 or equivalent in Jaquar/ Hindware.

PTMT Grating Round ( with waste hole) 125 mm dia, fixing in repair, complete all as specified. Make:- Prayag. Cat No- 113 or equivalent in Polytuf/ Jindal.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good, cutting n.exc 10cm girth in brick walls.

UPVC (SWR) type B pipes 50 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge. Make -Astral, Supreme, Finolex

UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge. Make : Astral, Supreme, Finolex

UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of PVC as per manufacturer instructions fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge. Make -Astral, Supreme, Finolex

UPVC (SWR) type B pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge. Make : Astral, Supreme, Finolex

UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls using PVC clamp as per manufacturer's specification at spacing of 1m center to center, complete all as specified and as directed by Engineer-in-charge. Make -Astral,Supreme, Finolex

UPVC (SWR) bends with access door for 75 mm bore , complete all as specified and as directed by Engineer-in-charge. Make : Astral, Supreme, Finolex

UPVC(SWR) bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge. Make : Astral, Supreme, Finolex

UPVC branch piece, single (single 'Y') with access door for 75 mm bore complete all as specified and directed. Make: Astral, Supreme, Finolex.

UPVC branch piece, single (single 'Y') with access door for 110 mm bore complete all as specified and directed. Make: Astral, Supreme, Finolex.

UPVC branch piece, double (double 'Y') with access door for 75 mm bore complete all as specified and directed. Make: Astral, Supreme, Finolex.

UPVC branch piece, double (double 'Y') with access door for 110 mm bore complete all as specified and directed. Make: Astral, Supreme, Finolex.

UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore , complete all as specified and as directed by Engineer-in-charge. Make -Astral, Supreme, Finolex

UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore , complete all as specified and as directed by Engineer-in-charge. Make -Astral, Supreme, Finolex

UPVC (SWR) reducers 110 mm dia complete all as specified. Make:- Astral, Supreme, Finolex.

UPVC (SWR) vent cowl 75 mm dia complete all as specified. Make - Astral, Supreme, Finolex

UPVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4),fixing in repairs, complete all as specified and directed. Make : Astral, Supreme, Finolex

UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, supply and fixing in repairs, complete all as specified. Make - Astral, Supreme, Finolex

CP health faucet (hand shower) with 1 meter long easy flexible tube in chrome finish with wall Hook (Holder), supply and fixing in repairs, complete all as directed by Engineer-in-charge. Make: Cera, Jaquar, Hindware

Glass shelf 600mm long, supply and fixing in repairs, complete all as specified. Make:- Cera, Prayag, Jainko

PTMT Shelf 450 mm long,supply and fixing in repairs, complete all as specified. Make:- Cera, Prayag, Jainko

PTMT Corner Shelf 200 mm long, supply and fixing in repairs, complete all as specified. Make:- Cera, Prayag, Jainko

Stainless steel gratings of outer frame dia 100 mm incl all necessary fittings such as hinges including embeding in tiles with white cement, supply and fixing in repairs, complete. Make:- Prayag, Jainko, Cera.

Complete removal of the existing roof treatment including grubbing up of tree roots and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water all loose dirt/dust.

Rendering 15mm thick plaster in CM 1:3 without extra cement on wall/ floor and including mixing of water proofing compound (WPC shall be measured and paid separately).

Applying Water proofing treatment to roof surfaces in following sequences- (a) Applying 2nd course of bituminous primer conforming to IS -3384 @ 0.4 Kg/Sqm cover the surface till the surface properly impregnated and insolvent oil primer evoporate completely. (b) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat. All joints and changes in direction should be covered with cement mortar 1:3 mixed with SBR latex @200ml/bag of cement and curved before laying membarance. (c) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm. Make : Asian Paints, Torchtar, Sika

Preparation of newly surface of APP membrane and applying two coats aluminium paint @ 200 ml per Sqm etc of any description having width/girth exceeding 10 cm complete all as specified.

Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed by Engineer-in-charge.

Supply only Water proofing compound liquid.

Cement concrete type E-2, 1:5:10 (Using 40 mm gradedcrushed stone agregate) in Sunkun portion ( Up to 4th floor) filling and mass concrete complete all as specified and directed by Engr-in-charge.

Plain cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate as in roof padding or similar works complete all as directed by Engr-in-Charge.

40 mm dia G I tubing heavy grade galvanised ISI mark laid over floors as a spout pipe in sunken floors all as specified.

Machine cut kota stone slab (Minimum size shall be 550x550 mm) flooring 18- 20mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.

Machine cut kota stone 10-12 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/colour of tiles over and including 10 mm thick rendering in cement mortar 1:4, as in vertical surfaces complete all as specified and as directed by Engineer-in-charge.

Cutting, grinding cleaning and treating the surface of existing kota stone including rubbing and mirror polishing complete all as specified and as directed by Engineer-in-charge.

Taking down shutters of any description exc 1.00 Sqm and n.exc. 2.00 sqm each and removing from the site all as specified & directed.

Aluminium hanging floor door stopper,Twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Aluminium bottom door seal with brushes, length 1.2 mtr, fix with screw, suitable for wooden door,fixing in repairs, complete all as specified.

Mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work,fixing in repairs, all as specified and as directed.

25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows (Including necessary fittings), supply and fixing in repairs, complete all as specified.

Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed.

Disconnecting of water tank of 500 ltr capacity setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing,etc. measured separately).

Disconnecting of water tank of 1000 ltr capacity setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing,etc. measured separately).

Cleaning and removing all scale and dirt etc, from exc 500 & n exc 1000 litres capacity tanks in any position and from mouths of circulating pipes etc, and disinfection completely by making all the arrangements and writing date of cleaning on side of tanks also containing completion from user complete all as directed.

Dismantling of ceiling board (Fibre,pulp,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets and snap grids complete all as specified and directed

Dismantling of CGI or plain or corrugated steel sheeting, any gauge, thickness, including nanital or similar pattern roof covering.

GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 7 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid, suppy and fixing in repairs, complete all as specified and directed by Engr-in-chrg. Make: Gyproc, Lafarg boral Gypsum India, India Gypsum

Pre- painted galvatume aluminum zinc coating (AZ-150 Micron) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified. Make:- Jindal (JSW), TATA, SAIL, Indian Ispat

Pre-painted galvalume aluminum zinc coating (AZ-150 Micron) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified. Make:- Jindal ( JSW), TATA, SAIL, Indian Ispat

Structural steel work conforming to Fe-410-W (Gde E-250 Quality-A or B) or Fe-290 Gde E-165, as in roof trusses (framed), purlins, crane gantries, rails, vertical post and fastenings, heavy brackets framing (Beam, tee, angle, channel, squre hollow section or flat section) including distance pieces, cleats etc complete all as specified.

Preparation of old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required all as specified.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and as directed by Engr-in-Charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge.

Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats including butt hinges 100 mm long. Piano hinges measured separately.

Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed by Engr-in-Charge.

100mm size Stainless steel designer handle complete all as specified and as directed.

Continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified.

Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-069), supply and fixing in repairs, complete all as specified. Make:- Jainko, Prayag, Cera

Chromium plated shower rose 125mm square size with arm 15mm dia 195mm long with bend 45 degree with brass flange, supply and fixing in repairs, complete all as specified and directed. Make :- Jainko, Prayag, Essco

Chromium plated, single towel rail 600mm long , supply and fixing in repairs, complete all as specified. Make:- Essco, Jainko, Prayag, Cera

PTMT Soap Dish/Oval, fixing in repairs, complete all as specified. Make:- Prayag. Cat No- 195 or equivalent in Polytuf/ Jindal.

Sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 680mm x 535mm x 225 mm bowl size 610mm x 460mm x 2225mm complete with waste coupling & PVC waste pipe,supply and fixing in repairs, complete all as specified and directed by Engineer-in-charge. Make : Jainko Model No- SSJ-3 & equivalent in Prayag, Cera

Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (30"x36"x10") fixed with steel fastners or steel screw complete. Make:- Jainko, Model No.KRJ-4. and equivalent in Prayag, Nirali, Jayana.

WC Orissa pattern white with integral foot rest 580x 440 mm including 'P' or 'S' Trap, L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe, supply and fixing in repairs, compete all as specified. (Rate is inclusive of taking out and removal of old WC seat in unhygienic condition) Make:- Cera, Cat Part No-S3010109 (COVYNA) or equivalent in Jaquar/ Hindware.

PVC Waste pipe 32mm bore of required length ,fixing in repairs, complete. Make: Prayag Cat No 329 or equivalent in Polytuf/ Jindal.

PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.

Granite (of any type) work, 16 to 18 mm thick,(table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick CM 1:4 as directed by Engr-in-charge.

Rounding to edges of stone slabs to demi-bullnosed, one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded aggregate ), in kerb stones, kneelers, apex stones,pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders with plain fair faces. including chamfers, weatherings, throatings etc. and setting in cement mortar 1:6 complete all as specified and directed. Note :- Form work required for these items included in the unit rate of this item.

Precast cement concrete louvers and jallies, 40 mm thick (1:2:4) type B-0 (using 12.5 mm graded aggregate) set in cement mortar 1:6, including all mouldings and dismantling old U/s broken Jallies at site, complete all as specified.

Taking down carefully aluminium conductor point wiring (light, fan, socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Taking down of unsv MCB DB SPN /TPN along with MCB's

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall, plastering after concealing conduit, terminated into modular galvanised flush boxes of suitable size including white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed for the following :- (a) One light/fan/bell point controlled by one, one way switch piano type 6 Amp .

(b) One 3 pin socket outlet on independent Board controlled by one one way piano switch 5 Amp

(c) One 3 pin 5 Amps socket outlet on same board controlled by one, one way 5 Amps piano switch.

(d) One bell/ buzzer point controlled by one, complete all as specified and directed.

All as per srl item No 156 above but for one 2 way light point controlled by two 2 way switch

All as per srl item No 156 above but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

Modular type switch, one way 6 Amps , 1 module complete all as specified and directed.

Modular type switch, Two way 6 Amps , 1 module complete all as specified and directed.

Modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.

Modular type switch, one way 16 Amps, 1 module complete all as specified and directed.

Modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.

Modular bell push with indicator polycarbonate materials ISI markrd 1 module, 6 Amps 240 Volts.

Musical door bell, AC 230 Volts single phase.

Modular type fan regulator step down 120 Watt, 2 module complete all as specified and directed.

Ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

LED tubelight fitting for 18-20 Watt LED, 230V, Batten type complete in all respect . Cat Part No DMLN1LT8-16 in Crompton or Cat Part No WIO921208 of Wipro, along with LED Tube Rod Polycarbonate with superior aesthetic and heat dissipation capability suitable for G-13 base tube lights base fluorescent T8-T12 luminaire, 18-20 watt LED wattage with colour temp of 6000K 1800 lumens and with surge arrestor complete in all respect. Cat part NO LTT 8-20 of Crompton or LL13-181-650 of Wipro or equivalent in list of makes. Note : The LED batten and LED tube rod shall be of same make.

Lamp holder,PVC /Polycarbonate type with back plate for batten fitting .

LED lamp suitable for B22 holder of capacity 7 Watt.

Distribution Board (SPN) double door 8 Way and should be IP 43 protected with Copper Bus bar, Earth Bar, neutral Bar Door Earthing.

Distribution Board (SPN) double door 4 Way and should be IP 43 protected with Copper Bus bar,Earth Bar ,neutral Bar Door Earthing.

MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed.

MCB Single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed

Sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1 x 6 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Taking down of ceiling Fan ,dismantling blades and depositing Fan and blades in safe custody of user or MES store yard of AGE E/M.

Taking down and refixing of Exhaust fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer.

Energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells Cat Part No LHEOAOP7UZ6W010 or equivalent in Crompton/ Philips/ Wipro

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 volts complete all as specified and directed.

Vertical Distribution Board (VTP&N) 6 way double door suitable for and including MCCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. Make: Legrand/IndoAsian Optipro/Schnider/C&S Note:- (i) MCCBs FP & SP shall be measured paid separately (ii) MCB & DB shall have the same make.

4 Pole MCCB 125 Amp, 415 Volts with rupturing capacity 16 KA , complete all as specified and directed

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

LED liminaire 600mmx600mm 35/36 watt 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cables of suitable size complete all as specified. Make : Wipro / Jaguar / Philips.

Street light fitting LED type 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistent complete with driver lamp holder lamp bracket with impact and corrosion resistent including thermal management in multiple optics complete with IP66 protection complete including GI pipe bracket of suitable dia and length with nut bolt and washer all as specified and directed. Make : Wipro Cat No. LR02-391-XXX-57-XX or its equivalent in Jaguar /Philips.

Cable XLPE PVC insulated,screened, PVC bedded galvanised steel strip or wire armoured electric power cable ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm x 2 core .

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for laying of pipes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft loose soil all as specified and directed.

Returning filling in, trenches including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in any type of soil complete all as specified.

Removing excavated surplus materials to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

Dry sand for cushioning to cable by providing with a layer of sand 8cm deep before laying the cable and 15cm deep after laying and stretching the cable in trenches complete all as specified and as directed by the Engineer-in-Charge.

Sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid.

M/S K D Construction Co

Azurite Engineering

M/S KEWAL MAHAJAN AND CO

bamral builder

M/S PARAMJEET SINGH