Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹4.8 L+₹50,504 (11.9%)Rejected-Finance R O GOOL RAMBAN J K PIN 182144 | RAMBAN | JAMMU AND KASHMIR | 182144 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹5.0 L+₹78,259 (18.4%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹5.5 L+₹1.3 L (29.9%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹6.2 L+₹2.0 L (46.4%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹5.6 L
EMD Value
₹11,200
Closing Date
2 Jan 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer University Works Department
Office of the Executive Engineer University Works Department University of Jammu
Upgradation of Room No. 210 at 2nd Floor of Computer Science and IT Department of Jammu University Campus Jammu
2022_UDJK_200567_1
eNIT No. 710 dated 15-12-2022
Open Tender
Civil Works
Item Rate
90 days
University of Jammu
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Executive Engineer University Works Department
₹11,200
4 Feb 2025
23 Dec 2022
4 Jan 2023
23 Dec 2022
2 Jan 2023
23 Dec 2022
Amount
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately ) For Fixed portion / Openable Powder coated aluminum (minimum thickness of powder coated 50 microns)
----------do------------- b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and allied fittings complete as required including the cost of PVC / neoprene gasket required Powder coated aluminum (minimum thickness of powder coated 50 microns)
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item) : With glass panes of 5 mm thickness
Providing and fixing powder coated 50 microns aluminum work (10 gauge) for doors, windows, ventilators, Almirahs and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For frames and shutter of door windows, ventilators & Almirah including providing and fixing hinges / pivots, handles, tower bolts, eye hooks/window stays, including the cost of PVC/neoprene gasket, 5mm glass panes / 12mm thick particle board laminated on both sides, locks of superior quality including P&F of Double Action Hydraulic door closer/floor spring of approved brand and manufacture IS:6315 with stainlees steel cover plate minimum 1.25 mm thickness. The spacing of vertical/horizontal members not to exceed 4 feet and the section to be used shall be 104mm x 44.45 mm.
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete 125 mm
Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300 x 16 mm
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150 x 10 mm
Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Super structure above plinth including curing in cement mortar 1:6 (1 cement : 6 sand). All work upto floor V level.
Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100 x 75 x 4 mm
15mm Cement plaster on the rough side of single or half brick wall in cement mortar 1:4 ( 1 cement : 4 sand). All work upto floor V level.
Providing and applying white cement based putty of specified thickness 1.0mm (avg.) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
Providing and laying vitrified floor tiles 600 x 600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make (Kajaria/Somany/RAK) in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete
Providing and fixing PVC Panelling to walls including openining Electricals fittings including cost of mouldings, chaneels whereas necessary all job complete (Heavy duty/Superior quality)
Disposal of Mulba/Dismantled material outside the University Campus by engaging Tractor Trolly including cost of loading/unloading.
M/S MOHD ASHRAF SHAN
Mohd Sharief Wani
M/S NISAR AND CO.
M/S MAROOF AHMAD RANGREZ
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .