Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 CrAdmitted-Finance | ₹1.9 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.9 Cr+₹18,002.56 (0.09%)Admitted-Finance | ₹1.9 Cr+₹18,002.56 (0.09%) | L2 | Admitted-Finance |
| 3 | L3₹2.0 Cr+₹4.2 L (2.19%)Admitted-Finance | ₹2.0 Cr+₹4.2 L (2.19%) | L3 | Admitted-Finance |
| 4 | L4₹2.0 Cr+₹7.3 L (3.81%)Admitted-Finance | ₹2.0 Cr+₹7.3 L (3.81%) | L4 | Admitted-Finance |
| 5 | L5₹2.0 Cr+₹11.7 L (6.12%)Admitted-Finance | ₹2.0 Cr+₹11.7 L (6.12%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SARSWATI CONSTRUCTION COMPANY L3 | M/s Mohd Sajid Construction L2 | MS BALAJI BUILDERS, TARANAGAR L5 | M/S Mumal Associates L4 | M/S GURU JASNATH JI CONSTRUCTIONS L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Supplying, installation, testing and commissioning of the passenger/goods/stretcher or bed elevator having following main features : | 1 | Nos | 12,00,000 ₹12,00,000 | 9,40,000 ₹9,40,000 Lowest | 21,25,000 ₹21,25,000 | 14,75,000 ₹14,75,000 | 13,00,000 ₹13,00,000 |
| 1.01(a) MOTOR : Gearless lift drive comprising of high starting torque lift duty, 3 phase 440 volts A.C. permanent magnetic synchronous motor of proper rating with high efficiency shall be used. | ||||||||
| 1.02(b) Operation / Drive : Microcessor based / PLC, AC Variable voltage variable frequency variable speed (V3F) vector control drive with encoder feedback closed loop system shall be used for lift car and door operation which shall be full collective selective operation hall call demand response, UP/Down hall stops, main, UP/Down contractor with overload and phase reversal relay and safety controls. | ||||||||
| 1.03(c) Traction Media : Main hoist flat coated steel belt/ rope. Thimbles of spring permit adjustment of uniform tension for smooth operation of the elevators pulse belt monitoring system to avoid the cut in the belt. | ||||||||
| 1.04(d) Car : Car should be with MS platform with bracings of adequate size and to sustain the impact load cabin plus passengers with safety factor of fire for steel with Anti skid PVC flooring and side panels should be of stainless steel with hair line finish of sheet of grade 304 duty with S.S. handrails. Car ceiling shall be steel finish with aesthetic appearances with LED ceiling lights. The size of the car shall be taken as per available lift well size and relevant BIS code of lifts. Car panel will also be of SS 304 grade finished with emergency stop device, emergency alarm, mechanical door safety device, fill length infra-red curtain in car door, facility of auto/attended mode. All car panel buttons and all floor switches must be with brail language as per lift act. Agency shall also provide & install one no. 2 MP, IR, IP based ceiling mounted dome camerain the car complete with connecting cables & accessories (To be connected with existing CCTV system in the building). The inspection unit shall be provided at to the car. | ||||||||
| 1.05(e) Landing Doors : All landing door shall be fully automatic centre opening/ telescopic made of hair line finish stainless steel grade 304 with key holes and infrared curtains with unlocking facility from outside. | ||||||||
| 1.06(f) Emergency light : Appropriate rechargeable battery operated LED emergency light in the car and along with alarm switch shall be provided. | ||||||||
| 1.07(g) ARD : Automatic rescue Device (ARD) shall be provided according to passenger capacity with SMF batteries of approved Make as per Engineer incharge. | ||||||||
| 1.08(h) Audio-Visual Indication : Audio visual indication in the lift car, showing over loading such that doors kept open till excess load is removed. | ||||||||
| 1.10(i) Scrolling indicators : Digital scrolling indicator system for up-down arrow with floor position indicator shall be provided inside the car and at all stops/floors. | ||||||||
Tender Value
Refer Docs
EMD Value
₹2.2 L
Closing Date
21 Jan 2021, 6:00 pmClosed
EE RSAMB
Bikaner
Constt of Khadi Plazza at unee utpatti Kendra Rani Bazar Bikaner.
2020_RSAMB_208184_1
EE-RSAMB-BKN-NIT-06-2020-21
Open Tender
Civil Works
Percentage
300 days
Bikaner
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,000
EE RSAMB
₹2.2 L
Yes
15 Feb 2021
21 Dec 2020
25 Jan 2021
21 Dec 2020
21 Jan 2021
21 Dec 2020
Amount
Supplying, installation, testing and commissioning of the passenger/goods/stretcher or bed elevator having following main features :
(a) MOTOR : Gearless lift drive comprising of high starting torque lift duty, 3 phase 440 volts A.C. permanent magnetic synchronous motor of proper rating with high efficiency shall be used.
(c) Traction Media : Main hoist flat coated steel belt/ rope. Thimbles of spring permit adjustment of uniform tension for smooth operation of the elevators pulse belt monitoring system to avoid the cut in the belt.
(d) Car : Car should be with MS platform with bracings of adequate size and to sustain the impact load cabin plus passengers with safety factor of fire for steel with Anti skid PVC flooring and side panels should be of stainless steel with hair line finish of sheet of grade 304 duty with S.S. handrails. Car ceiling shall be steel finish with aesthetic appearances with LED ceiling lights. The size of the car shall be taken as per available lift well size and relevant BIS code of lifts. Car panel will also be of SS 304 grade finished with emergency stop device, emergency alarm, mechanical door safety device, fill length infra-red curtain in car door, facility of auto/attended mode. All car panel buttons and all floor switches must be with brail language as per lift act. Agency shall also provide & install one no. 2 MP, IR, IP based ceiling mounted dome camerain the car complete with connecting cables & accessories (To be connected with existing CCTV system in the building). The inspection unit shall be provided at to the car.
(e) Landing Doors : All landing door shall be fully automatic centre opening/ telescopic made of hair line finish stainless steel grade 304 with key holes and infrared curtains with unlocking facility from outside.
(f) Emergency light : Appropriate rechargeable battery operated LED emergency light in the car and along with alarm switch shall be provided.
(g) ARD : Automatic rescue Device (ARD) shall be provided according to passenger capacity with SMF batteries of approved Make as per Engineer incharge.
(h) Audio-Visual Indication : Audio visual indication in the lift car, showing over loading such that doors kept open till excess load is removed.
(i) Scrolling indicators : Digital scrolling indicator system for up-down arrow with floor position indicator shall be provided inside the car and at all stops/floors.
(j) Buffers : Spring buffers/PU buffers shall be provided.
(k) Car Fan : ENERGY EFFICIENT Car fan/blower with automatic sleep timer shall be provided.
(l) Voice Annunciator : Voice annunciator with suitable music shall be provided in lift car.
(m) Self diagnostics system for operational and safety parameters shall be provided in control panel
(n) Mechanical/Electronic over speed governor, door key holes in the floor doors, fireman switch shall be provided.
(o) Lift machine hoisting arrangement in the lift machine room, counter balance to promote smooth and economic operation complete with steel guide rails for the car & counter weight, Trap Door, lifting hooks as required and monkey ladders for lift pit should be provided by the agency along with all other steel structure works, foundations for the machine etc. as required.
(p) Permanent wiring in lift machine room and in lift well with providing and fixing of electrical distribution board complete with SP & TP MCB's, proper numbers of light points, with LED fixtures, exhaust fan, 2 nos copper plate/chemical earthing with 8 SWG copper earth wire and plug points shall be provided by the agency. (Power supply of 3 phase 440 V shall be made available by department in lift machine room).
(q) Agency has to provided all working drawings and documents to comply latest BIS specifications and make proper liaison services for obtaining all necessary permissions.
® 6 passengers/408 Kg., 3 stops, rated speed adjustable up to 1.50 mtr./sec with 2 years comprehensive maintenance / DLP make OTIS/KONE/SCHINDLER/MITSUBISHI.
Providing and fixing glass door with 12.00 mm thick toughened glass including patch fitting top,bottom,lock,floor (ozone) including floor spring 8400 & brackets with all necessary fittings as per standrad specifiction including handles approved by engineer-in-charge.Fixed glass for doors
Providing and fixing glass door with 12.00 mm thick toughened glass including patch fitting top,bottom,lock,floor (ozone) including floor spring 8400 & brackets with all necessary fittings as per standrad specifiction including handles approved by engineer-in-charge.For shutters openable
Bidder Name
Amount
SARSWATI CONSTRUCTION COMPANY(GSTN-08ADIFS8802M1ZH)
M/s Mohd Sajid Construction(GSTN-08BMGPS4268D1ZT)
MS BALAJI BUILDERS, TARANAGAR(GSTN-08ABHPL0377P1Z4)
M/S Mumal Associates(GSTN-08ADWPR0307E1ZG)
M/S GURU JASNATH JI CONSTRUCTIONS(GSTN-08AAIFG4851B1ZL)
SARSWATI CONSTRUCTION COMPANY
MS BALAJI BUILDERS, TARANAGAR
M/S GURU JASNATH JI CONSTRUCTIONS
M/S Mumal Associates
M/S Mumal Associates
M/s Mohd Sajid Construction
SARSWATI CONSTRUCTION COMPANY
MS BALAJI BUILDERS, TARANAGAR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .