SPECIAL REPAIR TO BASIC GROUP BLDG NO. P10 H2 OF COY ASC SUPPLY TYPE AT KANPUR CANTT N SPL REPAIR TO REPLACEMENT OF OLD DETERIORATED WATER SUPPLY PIPE LINES AT ME LINE COD KANPUR

Amount

BnR Schedule

Taking down cement plaster/terrazzo on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick work/ stone boulder masonary built cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick, finished fair and even in CM (1:4) mixed with water proofing compound as per manufacturer instruction complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair face of brick or concrete surface, finished even and smooth in CM (1:6) complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of brick or concrete surface finished even and smooth in CM (1:4) complete all as specified and directed.

Supply only water proofing compound (ISI marked) complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of cement base paint on walls of approved shade over a coat of primer complete all as specified and directed.

S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc as specified in HQCELZ Lucknow Drg No- LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified and directed.

S&F factory made steel tubular ventilator with top hung shutter including hinges steel peg stay as specifed in HQCELZ Lucknow Drg No- LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified and directed.

S&F 3 mm thick plain sheet glass ordinary quality in square not exc 0.50 Sqm in each pane and glazing with oil putty complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for fixing holdfast and coping, benching including all necessary form work complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection, path, ramp etc, finished surface even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15 cm thick (below or above ground level) complete all as specified and directed.

M&L for 16 to 18 mm thick machine cut kota stone slab in floors in single pieces (size 600mmX600mm) laid over and including cement screed bed 15mm thick in cement mortar (1:6), jointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing with mirror finish complete all as specified and directed.

All as per item no 18 above but as in skirting over 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor to receive tiles/kota stone complete all as specified and directed.

Taking down old un-serviceable rolling shutter of area exc 8 Sqm but not exc 12 Sqm etc complete all as specified and directed.

S&F steel rolling shutters thickness of lath1.25mm, with out ball bearing including top cover, anchoring rod , spring, bottom rail with locking arrangment, side guide channel of suitable size and thickness etc hasp and staple and one shop coat of primer, erected in position as indicated but gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F steel rolling shutters safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F Ball bearing for rolling shutters complete all as specified and directed.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coat of colour wash over a coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down, smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coat of colour wash on walls complete all as specified and directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement base paint of approved shade on walls complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F in repairs mild steel wind ties for roof including securing bolts and all necessary drilling, bolting or riveting etc.,and similar work conforming to Fe-290 Gde E-165 R complete all as specified and directed.

S&F mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (all sections i.e. beam, tee, angle, channel, distance pieces, cleats and flat etc) at site Fe 410 -W(Gde-E- 250) A quality complete all as specified and directed.

Dismantling of CGI & PGI sheet in roof covering complete all as specified and directed.

S&F Regular modified Polyester colour coated galvanized steel rib profile sheet (TCT) 0.50mm thick, E42 (inclusive of protective coating) overall width 1060mm and total mass of coating 150 Gms/Sqm on both sides as per IS-14246:95 (JIS:3312 polyester coating 30-40 micron) as in roof etc fixed to iron /wooden members with self drilling zink alluminium coated metal screws of suitable size having cap with rubber washers complete all as specified and directed.

S&F Regular modified Polyester colour coated galvanized steel plain sheet(TCT) 0.50mm thick E42 (inclusive of protective coating ) as in ridge, velly, gutter and total mass of coating 150 Gms/Sqm on both sides as per IS-14246:95 (JIS:3312 polyester coating 30-40 micron) as in roof etc fixed to iron /wooden members with self drilling zink alluminium coated metal screws of suitable size having cap with rubber washers complete all as specified and directed.

S&F 3 mm thick Polycorbonate sheet corrugated sheet with corrugation same as profile sheet as in roof covering/cladding to wall with self tapping screws complete all as specified and directed.

S&F 3mm thick Polycorbonate sheet corrugated sheet with corrugation same as profile sheet and fixing arrangement of self driven air ventilator in middle portion as in roof covering/cladding to wall and fixed with self tapping screws complete all as specified and directed. Note: Rate for taking down and refixing of mechanical self driven roof top ventilator.

M&L machine pressed precast cement concrete interlocking paver block and shape and size (as approved) confirming to IS 15658-2006, M-40 grade, 80 mm thick with grey cement and pigment complete all as specified and directed.

M&L sand filling under floors /interlocking tiles or in foundation including watering and consolidation (with lead of 50 m. for sand) complete all as specified and directed.

M&L 2nd class HW as in plain , solid, straight chowkhats and frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned joints complete all as specified and directed.

S&F mild steel Joist, channel, angle, or tee sections fixed independentaly, without connecting plates etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conf to Fe-410-w or E -250 quality A complete all as specified and directed.

S&F expanded metal of wt not exc 4 kg per Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples complete to wood or steel members complete all as specified and directed.

Taking down chowkhat with shutter/shutters (without taking off shutters from the frames), size not exc 1.5 Sqm each complete all as specified and directed.

Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down of frame with shutters (without taking off shutters from the frames) size not exc 1.5 sqm each and fixing same shutter in the same opening after replacement of frame etc complete all as specified and directed.

Taking down of frame with shutters (without taking off shutters from the frames) size exc 1.5 sqm but not exc 4 sqm each and fixing same shutter in the same opening after replacement of frame etc complete all as specified and directed.

Taking down shutters of any description area not exc 1 sqm each and fixing in the same opening after replacement of frame etc complete all as specified and directed.

Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel ISI marked and fixed with mild steel screws complete all as specified and directed.

All as per Item No. 50 above but 75 mm in size complete all as specified and directed.

S&F in repairs aluminium anodised handle "D" type of size 125 mm complete all as specified and directed.

S&F in repairs 150 mm long aluminium anodised tower bolt of extruded section complete all as specified and directed.

S&F in repairs aluminium alloy anodised sliding door bolt with hasp & staple and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy 300mm size complete all as specified and directed.

M&L for preparation of old steel surfaces (truss purlin etc) of any description over 10 cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of wood / wood based material of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

EnM Schedule

Taking down carefully unserviceable of aluminium point wiring complete except for ceiling or where not feasible fan / plug / bell but including fittings such as switches, ceiling rose, pendents, regulator etc. and making good disturbed surface to match with the existing surface of roof / wall / floor by applying putty, plaster of paris etc. and applying finishing coat of existing treatment complete all as specified and directed.

M&L for point wiring with PVC (FRLS) insulated and unsheathed cable 1.5 Sqmm (Nominal area) multi-stranded copper conductor single core with proper colour coding including PVC conduit medium grade of 25 mm dia concealed in walls and surface on ceiling with and including pressed steel concealed terminal boxes of appropriate size and top cover 2.5-3.0 mm thick of plastic laminated sheet ISI marked of desired colour of make : Super Hylam, painting terminal boxes inside and outside with a coat red oxidé primer complete with all accessories with and including 1.5 Sqmm PVC insulated and unsheathed green colour multi-stranded copper conductor cable to common earth and connected to earth dolly complete all as specified and directed for the following points:-Note: Cutting chases in walls required for concealed conduit wiring shall be finished with cement mortar 1:4 and, surface shall be matched with existing surface by using putty, plaster of paris etc. and applying finishing coat of existing treatment shall be deemed to be included in the unit rate quoted by the contractor. Make of cable : Finolex/Polycab/ Havells/Plaza/Grandlay/ Gloster, Make of conduit : AKG/D-PLAST/FINOLEX/PLAZA as approved by GE

(a) One light/fan/bell/exhaust fan point controlled by one switch.

(b) One 3 Pin socket outlet 5 Amps on Independent board.

(c) One 3 Pin socket outlet 5 Amps on same board.

All as per item No. 59 here in before but for one power point, independent point with 2.5 Sqmm (Nominal area) PVC insulated and unsheathed copper conductor (FRLS) multi-stranded single core cable including green colour earth wire of size 1.50 Sqmm PVC insulated and unsheathed copper conductor (FRLS) multi stranded single core cable.

S&F of switch piano flush type 5/6 Amps single pole one way complete all as specified and directed.

S&F of switch piano flush type 15/16 Amps 240 Volts single pole one way complete all as specified and directed.

S&F of socket outlet flush type, 5 pin 6 Amps, 240 Volts complete all as specified and directed.

S&F of socket outlet 2 in 1, 6 pin 5 & 15 Amps, 240 Volts complete all as specified and directed.

S&F of ceiling rose surface bakelite of three terminals 240 Volts complete all as specified and directed.Make for item no 61 to 65: Anchor / CONA (WAWA) / Havells / Legrand.

S&F in replacement of old light fitting with LED tube light fitting high efficiency extruded aluminium housing linear batten 20/22 watt fixed on wall/ceiling complete with all accessories along with LED tube rod 20/22 watt and provision of three core flexible of 1.50 Sqmm copper conductor cable from ceiling rose to light fitting and other fixing arrangement as required at site complete all as specified and directed..Make:- Philips Cat Part No BN021C LED 20S PSU NW GR / Wipro TRIM LED LL20-281-XXX-65AL1 / Havells cat part no ENDURALINEARNEOBS 20WLED865SPCWH /Bajaj cat part no BCLAB 20W Note : Contractor will submit guarantee/warranty certificate from manufacturer.

S&F in replacement of LED wall security light 25 watt, pressure die- cost aluminium IP-66 road way luminaries with high power LED as light source with acrylic cover with suitable size bracket fixed with clamps, nut bolt, washer and provision of three core flexible of 1.50 Sqmm copper conductor cable from ceiling rose to light fitting complete all as directed Make: Havells cat part no SL25WLED 757SASYTOPCMP/ WIPRO cat part no LR02-291-xxx-57-xx/ C&S cat part no INDUS-E/25W LTESSE25WLED/Bajaj cat part no BCLST25WLEDIV2 or equivalent in Philips. Note : Contractor will submit guarantee/warranty certificate from manufacturer.

S & F in repair of sheet metal enclosure double door factory made MCB distribution board Single pole and neutral 240 Volts, 8 way with neutral and earth bus bar having IP-43 protection and double door metal concealed/flush to wall surface including making connections with thimbles as required complete all as specified and directed. Make : Schneider / L & T / Legrand/Indo Asian/C&S/Havells

S&F of MCB single pole, 6 to 32 Amps, 240 Volts, 10 KA complete all as specified and directed. Make: Legrand/Havells/Indo Asian/Schneider/ABB as approved by GE.

M&L MCB SPN, 240 volts 32 to 63 amps,with rupturing capacity 10 KA using thimbles of required size. Make : Schneider / L & T / Legrand/Indo Asian/C&S/Havells

M&L for earthing with galvanised steel earth plate electrode 600x600x6mm thick buried directly in the ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below the ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washers of galvanised or steel all as specified or shown in electrical plate of SSR (Part-l) including necessary excavation, earth work, GI pipe 15 mm dia light grade for protection of galvanised iron earthing wire, GI pipe 20 mm dia light grade watering pipe etc. including concrete chamber of PCC 1:2:4 type B-2 (using 40mm graded stone aggregate), copping in PCC 1:3:6 type C-1 (using 20mm graded stone aggregate), internal surface of concrete chamber shall be plastered with 12 mm thick cement mortar 1:4 and 50 mm thick RCC cover in pre-cast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) duly reinforced with 8 mm dia1or bar @ 80 mm c/c both ways and charcoal dust, common salt etc. including testing after completion complete all as specified and directed.

Disconnecting electrically and taking out old unservicable LT UG cables any type of size up to 10 Sqmm 2 core all as spfd and directed.

Supply and laying in tranches or fixing to wall/ pole or passing through pipe in replacement of XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 2 core Make of cable ICL/ICC/Gloster/Havells/Paragon/Grandlay/Kalinga incl making good all distributed wall surface/ flooring /tilling to match with existing specification complete all as specified and directed.

Excavation in trenches / foundation in soft / loose soil not exc. 1.5 metre wide and not exc. 1.5 m deep for HT / LT under ground cable / pole fondation/laying of pipe line and getting out including forming bottom surface to required level or slope, complete all as specified and directed.

Returning filling of excavated soil after laying the cable with spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in loose/soft soil complete all as specified and directed.

Removal of surplus soil/excavated material obtained from ground level to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above from the starting point complete all as specified and directed.

M&L for clean and dry sand for cushioning to U/G cable in layers of 23cm thick (8 Cm before laying the cable and 15 cm thick after laying the cable) in trenches including watering and consolidation complete all as specified and directed. Note: Only punned thickness 18 cm shall be measured and paid under this item.

M&L for Sub class 'B' bricks old size laid dry flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed.

Disconnecting, dismantling and taking up or down old/unserviceable/ cracked GI tubing with fittings including cleaning for refixing or removal from the site of the following sizes:- Note: Excavation and earth work will be measured and paid separately under relevant items.

(a) 20mm dia

(b) 25mm dia

(c) 40mm dia

(d) 50mm dia

Refixing/ relaying of old steel tubing and connections jointing and testing in new or old position incl new fittings such as required at site laid in trenches or on walls/road/floors/path etc and making good the disturbed surface to match with existing surface complete all as specified and directed of the following sizes :-

(a) 20 mm dia (obtained from item no 79.01)

(b) 25 mm dia (obtained from item no 79.02)

(c) 40 mm dia (obtained from item no 79.03)

(d) 50 mm dia (obtained from item no 79.04)

Supply & Laying, jointing and leakage testing GI tubing medium grade with all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches/floor/walls and making good the disturbed surface to match with existing surfaces complete all as specified and as directed at site of the following sizes :- Make: Tata/Jindal/Prakash Surya as approved by GE(I). Notes :(i) The laying and jointing of pipes are required to be carried out in short / long streches catering to specific requirements of a purticular quarter or a group of blocks. (ii) Excavation & earth work shall be measured & paid seperately.

(a) 20mm dia

(b) 25mm dia

(c) 40mm dia

(d) 50mm dia

Disconnecting, dismantling and taking down of old us CI/DI/GI/Cemented Pipe line of sizes 80/100mm incl all fittings complete all as specified and as directed.

Relaying, jointing and testing old but serviceable CI/DI pipe line of sizes 80/100mm in new or old position incl new fittings such as required at site laid in trenches or on floors/road/path etc and making good the disturbed surface to match with existing surfaces complete all as specified and as directed.

Supply, laying, testing and commissioning in replacement of Ductile Iron pipe of size 100mm bore including Rubber gasket joints and other relative accessories, Class K-7 in any length laid in trenches and making good the disturbed surface to match with existing surfaces complete all as specified and directed of following sizes. Make: Electrosteel/ Jindal/Lanco/Jai balajee

Cutting existing CI/DI water main 150mm bore pipe in position for making branch connection and CI/DI pipe line (Insertion of CI/DI tees bends of different size on connection pieces or for insertion of sluice valve) including excavation & earth work. Note : Fittings such as tees, bends, collars & reducers etc incl in this item and only run lead joints, CI/DI fittings & sluice valve shall be measured and paid separately and making good all disturbed surfaces of wall/ floor/ road/ path to match with existing specification all as specified and directed.

M&L for Cast iron/ductile iron special fittings for spigot and socketed pipes such as bends (any type, radius and angle) socket tapers any type, (straight, bend, increasing, decreasing or double socket etc) Tee pieces, single branch, Y junction, double branch, cross (all sockets or socket and spigot) collers, caps and plugs for upto 150 mm bore pipes complete all as specified and directed.

S&F in replacement of cast iron double flanged sluice valve of size 100mm bore, class PN 1.0 confirming to IS 14846/2000 with with high tensile stainless steel spindle with CI wheel, Gun Metal Nuts/rings 'I' bolt, ISI marked including replacement of rubber packing complete all as specified and directed. Make : Kirloskar/Upadhyay as approved by GE(I).

Material and Labour in repair for brick masonry valve pit chamber of size 900mm x 900mm x 900 mm (internal) with 230mm thick brick work complete with PCC (1:3:6) type C-2 for foundation, brick work in Cement Mortar (1:6), 15 mm thick plastering in Cement Mortar (1:4) (internally) including 6.0 mm thick MS plate covering and angle iron frame of 40mm x 40mm x 6.0 mm including coping, 100 mm thick, PCC flooring in 1:2:4 type B-1 and two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces including preparation of surfaces with locking arrangement including excavation, returning filling removal of soil complete all as specified and directed.

Material and Labour in repair for brick masonry valve pit chamber of size 600mm x 600mm x 900 mm (internal) with 230mm thick brick work complete with PCC (1:3:6) type C-2 for foundation, brick work in Cement Mortar (1:6), 15 mm thick plastering in Cement Mortar (1:4) (internally) including 6.0 mm thick MS plate covering and angle iron frame of 40mm x 40mm x 6.0 mm including coping, 100 mm thick, PCC flooring in 1:2:4 type B-1 and two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces including preparation of surfaces with locking arrangement including excavation, returning filling removal of soil complete all as specified and directed.

S&F 20 mm dia gun metal, globe or gate valve with iron wheel head, screwed both ends, high pressure for iron pipe or for ferrule ISI marked complete all as specified and directed.

S&F 25 mm dia gun metal, globe or gate valve with iron wheel head, screwed both ends, high pressure for iron pipe or for ferrule ISI marked complete all as specified and directed.

S&F 50 mm dia gun metal, globe or gate valve with iron wheel head, screwed both ends, high pressure for iron pipe or for ferrule ISI marked complete all as specified and directed.

Ashirwad Contractor and Supplier

JOG CONSTRUCTION

ASIA BUILDER

DEO Traders