CONSTRUCTION OF PARKING SHED NEAR BUILDING NO E 21 KOTE AT PLATOON COMMANDER WING NAGZEERA LINES OF HQ JL WING, THE INFO SCHOOL BELGAUM. SPL REPAIRS TO ROAD FROM COOK HOUSE TO BLDG NO 128 OF MT DETACHMENT HQ JL WING THE INF SCHOOL BELGAUM. SPL REPAIR

Amount

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavating in post holes each nexc 0.5cum and getting out in hard/dense soil,returning and filling in ,ramming earth filling or broken rubble mixed with earth around in layers nexc 25cm watering and removing surplus soil to a distance nexc 50m and making good the disturbed surfaces etc complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in foundation of post holes complete all as specified and directed.

Material and labour for Plain cement concrete type D-2, 1:4:8 ( using 40 mm graded stone aggregate.)as in foundation, filling and mass concrete complete all as specified and directed

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. Note :Make : TATA BLUE SCOPE/LLOYD INSULATIONS LTD/JSW (COLOURON)

Supply and fix Rolled mild steel angle section for roof trussses(framed),trussed and purlins including distance pieces, cleats etc confirming to Gde Fe 410-W (Gde-E-250 quality - A) complete all as specified and as directed.

Supply and fix Mild steel section for hold fasts, wind ties for roof including securing bolts and cutting tops to shape ,drilling holes etc confirming to Gde Fe 290 (Gde-E-165 ) complete all as specified and directed.

Material and labour for Preparation of steel surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.

Material and labour for Preparation of steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6 complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:3:6) type C2 using 40 mm graded stone aggregate ,75 mm thick in plinth protection and finishing the cement concrete surface even and smooth without using extra cement. complete all as specified and directed.

Material and labour for 15 mm thick Rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of cement paint white or tinted paint over a coat of alkali resistent primer complete all as specified and as directed.

Material and labour for40mm thick PCC(1:2:4) type B1,(using 20mm graded stone aggregate) as flooring ,finished even and smooth with using extra cement including necessary steel form work complete all as specified and as directed..

Material and labour for glass dividing strips 3 mm thick width of strips 38mm and inserted in position to confirm to design complete all as specified and as directed. .

Material and labour for Machine pressed precast concrete interlocking colour paver block of 60mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 , with grey cement and pigment ,M-35 grade complete all as specified and as directed.

Material and labour for 50mm thick sand cushion under interlocking paver blocks including watering and consolidation, complete all as specified and as directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm exceeding 50 mm and not exc 100 mm deep complete all as specified and as directed

Material and labour for 7.5cm thick (compacted thickness) WBM with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), granite trap or basalt, spread, rolled and consolidated to gradient and camber required.complete all as specified and as directed.

Material and labour for Premix bituminous macadam with 4% binder content ( using VG 30) laid or rolled and compacted to required gradient and camber (consolidation thickness 75mm or less) .complete all as specified and as directed.

Material and labour for Preparing surfaces of unsurfaced water bound macadom by wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc; and applying evenly priming/tack coat with bituminous primer (VG 30 )at the rate of 10 kg per 10 sqm.complete all as specified and as directed.

Material and labour for Preparing surfaces of black top by wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc; and applying evenly priming/tack coat with hot bituminous primer (VG30) at the rate of 5 kg per 10 sqm. complete all as specified and as directed.

Material and labour for Bituminous pre-mixed semidense asphaltic bituminous concrete 40 mm consolidated thickness with 5.5 % binder content (VG 30 )by weight of total mix, rolled & compacted to required camber and gradient complete. complete all as specified and as directed.

Material and labour for Providing 2.5mm thick road marking strips (reflective) of specified shade/colour using hot thermoplastic road marking paint by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe, heater, driven by skilled operator on road surface including cost of materials labour, T&P, cleaning the road surface of all dirt, scales, oil grease and foreign materials etc to applicable specifications including scrubbing out old worn out markings etc .complete all as specified and as directed.

Supply and fix Road studs (Cats-eye) of size 100x100 mm, white or yellow colour, ABS body with reflective glass elements (white or red) in duo directions fixed on road with two component epoxy hardener and resin/ HT nail as per manufacturers instructions complete all as specified and as directed. Make: Sun eye/ 3M/ Protek.

Material and labour for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings and taken as credit complete all as specified and as directed..

Dismantling timber scantling of size 40 Sqcm and over in section, in any position for unframed work and taken as credit complete all as specified and as directed..

Material and labour for 2nd class hard wood timber scantling cleans sawn and fixedcomplete all as specified and as directed..

.-Description- all as per item No 29 here in before but except timber.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. Note :Make : TATA BLUE SCOPE/LLOYD INSULATIONS LTD/ JSW (COLOURON)

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge fixed with self tapping screws complete all as specified and as directed. Make : TATA BLUE SCOPE/LLOYD/METCO

Supply and fix Rolled mild steel trussed purlins, rafters, struts (beam, tee, angle channel or flat sections including distance pieces, cleats etc. confirming to grade Fe 410-W Gde E - 250 quality 'A' or Fe 310-0 complete all as specified and as directed.

Supply and fix Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 complete all as specified and as directed

Supply and fix Mild Steel work as in wind ties etc including securing bolts and all necessary drilling ,bolting or rivetting conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6, type C1 (Using 20 mm graded stone aggregate) as in coping/bed plates eves filling in roof including necessary form work complete all as specified and as directed.

Dismantling boarding of any description fixed in any position with nails and taken as credit complete all as specified and as directed .

Supply and fix Aluminium composit panel board 3mm thick fixed over wooden/steel frames with necessory frame work with screwing and scaffolding etc complete all as specified and as directed.Note:Make: JINDAL/HINDALCO/INDAL

Material and labour for Preparation of new steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Taking down eaves gutter pipes,rain water pipes (of any size and pattern) including fittings,head shoes,bends,swan neck etc and taken as credit complete all as specified and as directed.

Supply and fix PVC (SWR) eaves gutter Half Square/half rounded 150mm dia complete all as specified and as directed.Make :Finolex/Supreme/Vectus

Demolition/breaking up or down PVC /AC/CI/Cement drain pipe any size fixed in any position and removable of debris off the premises and serviceable items taken as credit complete all as specified and as directed.

Supply and fix PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed . Note :Make of PVC(SWR) pipe : Finolex/Supreme

Supply and fix in repairs PVC (SWR) bends any radius provided with access door of 110mm bore complete all as specified and directed . Note :Make of PVC(SWR) bend ; Finolex/Supreme

Dismantling wall or ceiling boards or insulation boards/ slabs any thickness including cover fillets and taken as credit complete all as specified and as directed .

Supply and fix High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling with aluminum anodized snap grids of 60x60cm in ceiling with Tee section 35x25x1.25mm,angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling complete all as specified and as directed . Note :Make : ARMSTRONG/EVEREST

Material and labour for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded aggregate) exc 10 cm width and setting in CM 1:6 including demolition of old unserviceable pre-cast concrete articles and precast concrete block walling of any description and taken as credit complete all as specified and as directed.

Taking down cement plaster on brick or stone walls built in cement mortar including raking out joints ,hacking for key ,scrubbing down with water completeall as specified and as directed.

Material and labour for Rendering 15mm thick in CM 1:6 on PCC block or stone masonry surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 15 mm thick in CM 1:4 on brick or concrete surfaces in two layers 5mm top layer mixed with water proofing compound over 10mm thick rendering on external wall surfaces complete all as specified and as directed.Note :Water proofing compound wii be measured and paid seperately .

Supply only water proofing compound.Note :Make of water proofing compound :Impermo/Roff/Cico

Material and labour for Preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistent primer and 1 mm thick wall case putty complete all as specified and as directed .Note :Make of wall care putty : J K Birla

Material and labour for Preparation of newly plastered surface of walls and applying two coats exterior emulsion paintover water based primer complete all as specified nd as directed . Make : (Apex ultima - Asian paint)

Material and labour forComplete removal of existing treatment on wall with wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots etcand applying two coats of oil bound distemper over a coat of alkali resistant primer and 1 mm thick wall care putty complete all as specified and as directed .Note :Make of wall care putty : J K Birla

Material and labour for Complete removal of old plastered/unplasterd surfaces of wall and brooming down with water and applying two coats exterior emulsion paint over water based primer complete all as specified nd as directed . Make : (Apex ultima - Asian paint)

Demolition of cement concrete in ground floors n exc 15cm thick unreinforced (below or above ground level) and removal of debris not exceeding 100 meters complete all as specified and as directed .

Material and labour for Plain cement concrete type B-1, 1:2:4 ( using 20mm graded stone aggregate) in 25mm thick sub base of floor as in level course including necessary steel form work complete all as specified and as directed.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

Material and labour for Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces as backing coat of skirting, dado etc complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for Premium quality glazed ceramic tiles coloured of size 450x350x7 mm thick over vertical surfaces such as skirting , dado etc , set and jointed with cement slurry and pointed in coloured cement to match the shade of tile over and including rendering 10 mm thick in CM 1:4 on stone masonry walls as in backing coat of skirting, dado etc complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

Material and labour for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

.-Description- all as per item No 62 here in before , but cut to suitable size in skirting/dado over and including rendering 10 mm thick in CM 1:4 on stone masonry walls as in backing coat of skirting, dado etc complete all as specified and as directed

Material and labour for Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqmbut not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry and pointed including removal of debris off the premises and serviceable items taken as credit complete all as specified and as directed.

Material and labour for Machine cut 20mm thick Granite slab (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

Material and labour for Machine cut granite slab in dado or skirting etc 20mm thick laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing and backing coat in Cm 1:4, 15mm thick complete all as specified and as directed .

Material and labour for100mm thick PCC(1:2:4) type B1,(using 40mm graded stone aggregate) as sub base of flooring ,finished even and smooth with using extra cement including necessary steel form work complete all as specified and as directed..

Material and labour for Plain cement concrete, 1:4:8, type D2, using 40mm graded stone aggregate, 50 mm thick as in sub base/levelling including necessary steel form work complete all as specified and as directed..

Material and labour for Rubber coated chequered cement concrete tiles of size 30cm x 30cmx 25mm thick, with grey cement and pigments, with glossy finish on top set, jointed and pointed in neat cement slurry in floors laid over and including 15mm thick screed bed in cement mortar 1:6, etc. complete all as specified and as directed .

Material and labour for Machine pressed precast concrete interlocking colour paver block of 80 mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 , with grey cement and no pigment ,M-35 grade complete all as specified and as directed.

Material and labour for Grinding and polishing of tandoor stone/Kota Stone/ Terrezo tiles of required times complete all as specified and as directed.

Material and labour for Plain cement concrete type C2 1:3:6 (using 40 mm graded aggregate )75 mm thick in plinth protection and finishing the cement concrete surface even and smooth without using extra cement including necessary steel form work complete all as specified and as directed..

Taking down chowkats with shutters exc 1.50 sqm but n exc 4 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and as directed.

Taking down chowkats with shutters n exc 1.50 sqm each(without taking off shutters from the frame) and taken as credit complete all as specified and as directed.

Material and labour for Aluminium frame work as in doors, partitions and windows/Ventilators using powder coated aluminium sections including provision of glazing clips, hinges, handles, etc complete all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (iii) Particle board/ glass panels shall be measured and paid separately. (iv) Thickness powder coating shall not be less than 50 microns (v) Make of Aluminiumframe/fittings : Jindal/Hindalco/Indal

Supply and fix Second class hard wood plain solid straight chowkat or frame rebated on the solid, wrought, framed rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Supply and fix 2nd class hard wood 35 mm thick Factory made Plain ,Framed panelled door shutters, any no of panel with panels of 12 mm thick veneered particle board, medium density with commercial face veneers fitted to chowkhats complete all as specified and as directed.

Supply and fix 2nd class Hard wood 35mm thick Factory made glazed & skelton shutters open rebated & prepared to receive glass gauze etc (without sash bars ) ,edges of framing plain ,chamfered or rounded fitted with cut & mitred beads for securing glass etc divided into squares and size of members of shutters as specified in SSR Part-I section 8 caluse 8.24(a) complete all as specified and as directed.

All as per item No 79 here in before but if window,ventilator etc are provided with stiles and rails as specified in SSR Part-I section 8 caluse 8.24(b)

Material and labour for Preparing surfaces of new wood or wood based surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and fix Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire staples complete all as specified and as directed.

Supply and fix in repair Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire staple fixed in panels complete all as specified and as directed.

Supply and fix MS butt hinges cold rolled medium weight 100mm size complete all as specified and as directed. Note : Make :Adarsh/Classic/Crown

All as per item No 85 here in before but of size75 mm size

Supply and fix in repairs helical door spring Mild steel 300mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed. Note : Make :Adarsh/Classic/Crown

Supply and fix Aluminium alloy anodised handles fabricated type , Extruded section , 100mm long complete all as specified and as directed.Note : Make :Adarsh/Classic/Crown

Supply and fix Aluminium alloy anodised handles fabricated type , Extruded section , 150mm long complete all as specified and as directed.Note : Make :Adarsh/Classic/Crown

Supply and fix Aluminium anodised barrel tower bolt , extruded section of size 150mm long complete all as specified and as directed.Note : Make :Adarsh/Classic/Crown

Supply and fix Aluminium anodised barrel tower bolt , extruded section of size 100mm long complete all as specified and as directed. Note : Make :Adarsh/Classic/Crown

Supply and fix Aluminium alloy anodised sliding door bolts 300mm with hasp and staple (bolt type ) and fixing clip of sheet ,cast or extruded sections and fixing bolt & nuts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. Note : Make :Adarsh/Classic/Crown

Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.Note : Make of glass :Saint gobain/Modi Guard/Gold fish

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.Note : Make of glass :Saint gobain/Modi Guard/Gold fish

Supply and fix 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.Note : Make of glass :Saint gobain/Modi Guard/Gold fish

Supply and fix 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.Note : Make of glass :Saint gobain/Modi Guard/Gold fish

Taking up or down steel tubing and connections 15mm dia bore of pipe including cleaning for refixing or removal to store complete all as specified and as directed.

All as per item No 98 here in before but of bore of pipe 20mm dia

Supply and fix Unplasticised PVC pipes of pressure rating 10 kgf/cm2 of 15 mm bore of pipe fixed complete to walls, ceilings or in floors etc complete all as specified and as directed .Note :Make of PVC pipe :Finolex/Supreme

All as in item No 100 here in be f o r e but 20mmbore of pipe

Supply and fix Bib tap 15 mm bore brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed Make: JAQUAR or equivalent model in JOHNSON/ MARC/METRO.

Supply and fix in repairs Harrison curtain rails, mild steel chromium plated with fixing brackets, stops and rollers etc complete all as specified and as directed

Supply and fix in repairs Brass Knob 35 to 40mm dia for curtain rod complete all as specified and as directed Make :.

Supply and fix Mild steel Flat iron 25x3mm thick as in hold fast and similar small article conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

Supply and fix in repairs Wash Hand Basin vitreous white chinaware oval type of 550x400 mm size including CI/MS brackets and cutting for and pinning in ends of brackets or erecting stands , with long screwed shanks and fly nuts ,flange and bedded in red lead cement and other end fixed with all connection including PVC waste pipe of suitable of 32 mm dia and 1.00 meter lengthcomplete all as specified and as directed.

Supply and fix PVC connection 60 cm lenghth 15 mm size with PTMT nuts complete all as specified and as directed.Note :Make of PVC connection :Prayag/M/S Shakthi Industries

Supply and fix in repairs Tubular towel rail 20mm dia brass chromium plated D type 60cm long between flanges complete all as specified and as directed.

Supply and fix in repairs Stop valves fancy type brass chromium plated with long shank and cup (concealed type) screwed both ends for 15mm bore GI pipe or for union complete all as specified and as directed.Note :Make of stop valve :Leader/Zoloto/Metro

Material and labour for PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement complete all as specified and as directed. Note :make of PVC Floor Trap : Finolex/Supreme

Supply and fix in repairs vitreous china water closet, Pedestal type, white, including flush pipe, seat cover etc and connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etccomplete all as specified and as directed.

Supply and fix in repairs PVC flushing cistern 10 litres capacity syphonic action type, low level, white with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipes etc complete all as specified and as directed.

Supply and fix Square grating of 150mmSize of PTMT (minimum weight :100 gms) complete all as spd and directed ..Note :Make :Prayag/M/S Shakthi Industries

Supply and fix 15 mm bore 2 way Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed. Make: JAQUAR or equivalent model in JOHNSON/ CERA

Supply and fix health faucet , brass chromium plated with 1m long flexible PVC tube and wall hook complete all as specified and as directed. Make: Cat No. 563 of JAQUAR or equivalent model in Johnson/ CERA

Supply and fix in repairs Pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make: , JAQUAR/ JOHNSON/ CERA

Supply and fix brass, chromium plated toilet paper holder fixed to wall with chromium plated brass screws complete all as specified and as directed. Make :Cat No.ACN 1151N of JAQUAR or equivalent model in CERA /JAQUAR/ JOHNSON

Supply and fix in repairs Soap dish, any type, fixed with plugs with chromium plated brass screws (for Baths of 3 cubical in each toilets) complete all as specified and as directed. Make: , JAQUAR/ JOHNSON/ CERA

Taking down carefully Aluminum/copper point wiring complete for light, fan, 5 A socket, 15 Amps socket, 2 way points and bell point etc in any type of wiring with boards, holders and any type of electrical fittings etc complete & making good the disturbed area and taken as credit complete all as specified and as directed.

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6 Sq mm drawn in to concealed wiring and including provision of PVC capping and casing of size 20/25 mm with all necessary fitttings and Provn of one run of 6.0 sqmm FRLS PVC insulated unsheathed multistranded copper conductor single core for earth continuity and connected to common earth dolly including dismantling of old U/S submain wiring of aluminium conductor cable of any size and taken as credit complete all as specified and as directed. NOTE:(i) Two runs of 6sqmm and one run of 6sqmm and one PVC casing and capping will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

Material and labour for Point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cable drawn through and including PVC casing and capping of size 20/25 mmwith all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of pressed steel terminal box with 3mm thick plastic laminated sheet top cover for housing switches,sockets etc concealed on wall . for one light point controlled by one switch 1 way complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/RR Kabel (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

All as described in item No. 122 here in before but for One light point controlled by one switch and regulator

All as described in item No.122 here in before but one call bell point controlled by one bell push

All as described in item No.122 here in before but one 05 Amps socket outlet on independent board.

All as described in item No.122 here in before but one 05 Amps socket outlet on the same board with other switches.

All as described in item No.122 here in before but wiring with 2.5 Sqmm FRLS PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductorFRLS PVC insulated unsheathedmulti-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly through PVC casing capping medium grade of size 25/20 mm, etc fixed on wall/ceiling of suitable size for 15 Amps socket outlet independent complete all as specified and as directed.

Supply and fix Modular Switch piano type 5 Amps flush button 230 volts AC one way, complete all as specified and as directed Make -Anchor (Roma)/Legrand/Cona

Supply and fix Modular bell push flush type AC 230 Volts 6 Amps, complete all as specified and as directed.Make -Anchor (Roma)/Legrand/Rider

Supply and fix Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/Cona

Supply and fix Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed.Make -Anchor (Roma)/Legrand/Cona.

Supply and fix Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed . Make -Anchor(Roma)/Cona/Legrand

Supply and fix Modular fan regulator electronic step type 2 module suitable for 1200/1400 mm sweep ceiling fan complete all as specified and as directed.. Make : Anchor/HPL /Rider

Supply and fix in repairs or replacement of Ceiling rose of PVC or Polycarbonate body ,3 terminal , isolated body suitable for 230 volts AC supply, complete all as specified and as directed Make -Anchor/Cona/Legrand

Supply and fix in repairs Call bell, ding dong, 230 volts AC complete all as specified and as directed. Make -Anchor/HPL/Rider

Supply and fix in repairs LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make : Philips cat part no : Slimline 20W or equivalent price and specification of M/S Wipro/CG

Supply and fix Ceiling fan complete with 03 Nos of blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. Make : Orient/CG/Bajaj

Supply and fix Exhaust fan , steel body , AC single Phase. 230V of size 300mm sweep , copper winding with, blades, and frame and louvers ,Heavy Duty and including making suitable arrangement for fixing the exhaust fan i.e.,making suitable holes,grouting , anchor fastener bolts etc and matching the surface with existing surfacecomplete all as specified and directed. Make : CG/Bajaj/Khaitan

Supply and fix in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Philips cat part no : Slimline 10W or equivalent price and specification of M/S Wipro/CG

Supply and fix in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed . Make : Philips cat part no : LCTLRP-36-FO-CDL or equivalent price and specification of M/S Wipro/CG

Supply and fix LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.. Make : Philips cat part no : BRP020 LED HP/CW 240V 25W or equivalent price and specification of M/S Wipro/CG

Supply and fix Sheet metal enclosure type TPN Vertical Loadline DBs fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) 4 Way with double door type and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCB DB on board complete all as specified and as directed. . Make: Siemen /Legrand/ABB

Supply and fix MCCB TP 125 A 25KA 50HZ AC supply current rating conforming to IEC-609472 & IS-139473 including dismantling old one and taken as credit complete all as specified and as directed.. . Make: Siemen /Schneider/ABB

Supply and fix Sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar double door type and including 2nd class hard wooden board 4cm depth with sunmica top of suitable size to fix the MCB DB, complete all as specified and as directed. Make : Legrand/L&T/Indo Asian

Supply and fix MCB DP 40 A 10KA C series 50HZ AC supply including dismantling old one and taken as credit complete all as specified and as directed.. . Make: Siemen /Schneider/ABB

Supply and fxi MCB SP 240 Volt capacity 5 to 32 Amps‘C’ series, complete all as specified and as directed. Make: Siemen/ABB/Legrand

Supply and fxi MCB SP 240 Volt of capacity 5 to 32 Amps‘C’ series, complete all as specified and as directed. Make: Siemen/ABB/Legrand

Taking down existing unserviceable energy meters,dismantling and removing energy meter to store

Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and as directed . Make : Secure/L&T/HPL

Supply and fix Sheet Moulding Compound (SMC) box of size 250x250x155 mm or suitable size for single phase meter, off white colour, with front hinged type door and locking arrangement, front side transparent and of size suitable for single phase AMR Meter and box fixed on wall with suitable Screws complete all as specified and as directed.Make: SINTEX (GS MB 2525 NF) /Hensel

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

Taking up or down steel tubing of size upto 40 mm bore and connections and taken as credit complete all as specified and as directed.

Taking up or down steel tubing of size upto 25 mm bore and connections and taken as credit complete all as specified and as directed.

Supply and fix Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layered , hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.Make :Sintex/Polycon/Vectus (ISI Marked)

Supply and lay 40 mm bore dia galvanized iron pipe “Medium grade” with all fittings laid in trenches complete all as specified and as directed. :-. Make : TATA/JINDAL/PRAKASH SURYA

Supply and lay 25 mm bore dia galvanized iron pipe “Medium grade” with all fittings laid in trenches complete all as specified and as directed. :-. Make : TATA/JINDAL/PRAKASH SURYA

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth for laying of cables/ GI tubes etc, in any type of Soil complete all as specified and as directed.

Returning, filling in including spreading levelling & well ramming in layers n exc 25cm thick with soil obtained from excavation complete all as specified and as directed.

Removing excavated material/surplus soil n exc 50m & depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Supply and fix Gun-metal, globe or gate valves, heavy duty , ISI Marked with iron wheel head, screwed both ends for iron pipe and fixed of size 40 mm bore including taking down old one and taken as credit complete all as specified and as directed. Make : Leader/Zoloto/kirloskar

Supply and fix Gun-metal, globe or gate valves, heavy duty , ISI Marked with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm bore including taking down old one and taken as credit complete all as specified and as directed. Make : Leader/Zoloto/kirloskar

Supply and fix 25 mm dia PTMT Ball valve ,high pressure 9Minimum weight :210 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed. Make : Prayag/M/S Shakthi Industries

Disconnecting existing tank and connections and removing from site of capacity 2000 Ltrs and taken as credit complete all as specified and as directed.

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and as directed. Note : Make: Gloster/Poycab/CCI

Supply and lay in repairs Double Wall Corrugated High density polymer Ethyl pipe PN8 (SDR 17 ) of size 63 mm outer dia with ISI Marked as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc. including necessary fittings such as bends, sockets and other connected accessories etc for laying of electric cables, complete all as specified and as directed. Make - Duraline, Rex, Ketron

Material and labour for GI pipe light grade 50mm dia with all fittings & fixed complete on pole/walls/in road etc for cable protection complete all as specified and as directed. Note : Make: TATA/Jindal/Prakash surya

M/S JAYDEEP CONSTRUCTION

DHANSHRI ENTERPRISES

RAJARAM TAYAPPA DANDAGALKAR