SPL REPAIR/ REPLACEMENT OF OLD UNSV LT CABLES AT 522 ASC BN AND ALLIED UNITS AND CERTAIN OTHER SANCTIONED WORK UNDER GE (U) MEERUT CANTT.

Amount

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment laid over and incl 25 mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed.

M&L for Hard core of broken bricks of guage exc 63 mm, but not exc. 100mm, deposited spread, and levelled in layers n. exc 15 cm thick, watered and rammed to a true surface complete all as specified or as directed.

M & L for 100 mm thick PCC 1:3:6 type C-2, using 40 mm graded stone agg as in sub base etc complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismenteling of existing kota stone (if exist) complete all as specified.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing including dismenteling of existing kota stone (if exist) complete all as spd & directed.

M&L for pre cast cement concrete 1:3:6, type C-1, in kerb stone set in cement mortar 1:6, including necessary earth work excavation, complete all as specified and directed

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth and removing surplus soil to a distance n.exc 50 m in soft/loose soil complete all as specified & directed.

M&L for PCC 1:3:6 , type C-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

S&F Steel work in tubular trusess incl special shape washer etc. confirming to IS 1161-1979 grade St- 240 complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws complete all as specified and directed.

M & L for brick work with fly ash 'B' bricks, straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick work /concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coats of cement base paint over one coat of cement primer on walls any type including preparation of surfaces complete all as specified and directed.

S&F Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to rigid UPVC waste pipe bent to shape & fixed to wall with bracket, minimum bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge

M&L for preparation of new steel surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed.

S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

Excavation in treches in soft/loose soil n. exc. 1.5 meter wide and n. exc. 1.5 mtr depth and getting out, including trimming the sides and forming bottom surface to required levels for fixing pole/stay assembly and laying/taking out cables complete all as specified and directed.

Returning, filling trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

Removing of excavated material (soil) to a distance n. exc. 50 Mtr and dispositing where directed at a level n. exc. 1.50 Mtr above the starting point complete as directed.

M & L for Sand cushioning to UG cables (8cm deep before laying of cable and 15 cm deep over the cable). Note :- Punned thickness only will be considered for payment.

M&L for burnt clay fly ash old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor through pipes, induct, on poles, in trenches etc including taking out UG cable of any size any core in trenches/ pipe/ pole complete all as specified and directed of following sizes.

240 Sqmm, 3.5 core.

185 Sqmm, 3.5 core.

150 Sqmm, 3.5 core.

120 Sqmm, 3.5 core.

50 Sqmm, 3.5 core.

25 Sqmm, 4 core.

16 Sqmm, 4 core.

10 Sqmm, 2 core.

S&F PVC insulated wire copper conductor 3 core 2.5 Sqmm for connection junction box to street light complete and as directed by Engr- in- charge.

Supplying and fixing Astronomical street light timing switch having lighting control (ON-OFF) through Calculation of Sun rise/ sun set by setting date, time and degree of longitude and latitude without separate light sensors and prewired with suitable size of copper conductor single core PVC insulated and sheathed cable and all mechanism fitted into panel, outdoor type , pole mounted with FI 25x4mm clamps , nuts, bolts and washers dully painted, connecting and testing factory made , epoxy powder coated, Three Phase street light panel, digital 24 hrs, suitable for 8KW (max) complete with 40 Amps 3 pole/230V astronomical time switch, 40 amps TP Contactor, and 40 Amps FP MCCBs and fixed on pole/ wall/ feeder pillar complete all as specified and directed.

Supply, installing, testing and commissioning, factory made and tested . LT feeder pillar box (KIOSK) 1000mm x900x 600mm size, outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated aluminum bus bars 600 Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm CRCA MS sheet and 40x40x4mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, and fixing danger notice plate made of 1.6mm thick mild steel sheet, vitreous enameled white, of size 20 x 15cm with letter, figures and conventional skull bones in signal red colour and fixed front & back door LT panel etc with voltage and danger indiated in Hindi and English with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) stranded lock with 2 keys, internal wiring with PVC insulated, stranded copper conductor, FRLS cables, IS-694 marked of adequate size but not less than 10 Sqmm. The platform shall be such that it is of a height 45 cm above the nearest road level. complete all as specified and directedincluding connections of all out going/in coming existing cables of size 25/35/50/95/120/ 150 sqmm by drawing /digging out cable from loops in trenches out side the Bldg inclusive of necessary excavation and earth work as required and relaying the cables with retrieved bricks and providing new sand cushioning and crimping suitable size copper lugs for terminal connections of cables, necessary brick foundation with plastering to the Panel board, All out going feeders shall be connected by cable through suitable size gland plate / glands.& The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint and taking out of old skelton type panel with control switches complete all as specified and as directed Engr-in-Charge , The scope of work includes the following:-

(B) OUTGOING :- (i) MCCB 4 Pole, Thermal Magnetic Based 200 A, Breaking capacity 25 KA, 415 V, 50 Hz with OL, SC, protection, -2 Nos along with Spreader terminals. (ii) MCCB 4 Pole, Thermal Magnetic Based 160A, Breaking capacity 16 KA, 415 V, 50 Hz with OL, SC, protection, -01 Nos along with Spreader terminals. (iii) MCB TPN 40 Amp C-Curve - 2 Nos

Supplying and fixing of 40mm nominal bore Galvanised mild steel pipe /tubing, light grade for protection of earth lead / passing cable complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified (Excavation & Earth work shall be measured and paid separately)

M&L for auguring of hole suitable for passing 40mm to 100 mm bore pipe in true horizontal position under road, PCC paths etc., by means of mechanical ring/ auger after doing ultrasound to prevent any damage to existing cables pipe line specified and directed coming in the route not exceeding 1.5 m in depth below existing surface level of road and not excd 30M in length complete all as specified. Note: Pipe shall be measured and paid separately under appropriate items and any damage to existing cables of any size shall be made good by the Bidder without any extra cost to department.

S&F pole mounting type junction box factory made of size 350x250x150mm of FRP sheet duly powder coated with front openable hinged door, locking arrangements, with 4 Nos aluminium bus bars 40 Amps rating mounted on porcelain insulator, cable glands and lugs consisting MCB DP 6 Amps 'C' series (Make of MCB :Legrand / C&S / ABB) ,mounted on MCB rail -01 no. including mild steel flat iron clamp made out of 40x4mm FI, nuts, bolts and washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer

M&L in replacement of plate earthing for sub station equipments complete with galvanised mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.5 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth strip 32 x 6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of LT equipments etc at the other, earth strip encased in and including 40mm bore GI light grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25 x 3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-O using 12 mm graded crushed stone aggregate excavation & earth work and RCC cover complete all specified and shown in electrical plate No 3 of SSR Pt-I.

Taking down of LT cable of any size and make and remove from site complete all as specified and directed.

Taking down of old/rusted LT panel board/feedr pillar by removing connected cables etc and removing from site complete all as specified and directed by Engr-in-Charge.

Material and labour for GI tubing light grade 50 mm bore for passing through cables, laid in treanches, under the floor, along the wall or along the pole with necessary clamps, nuts, bolts and washers etc. and making good disturbed surface of wall, floor etc complete all as specified and directed .

Supplying, installing, commissioing and testing of LT Feeder piller box ( Kiosk) of size not less than 600mmx600mmx500mm, IP-55 (outdoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) , 400 Amps coloured horizontal tinned Aluminium bus bars , factory made out of 3.15 mm thick CRCA sheet structure mounted on rigid mild steel angle iron frame of 40mmx40mmx5mm with 400 mm long extended legs grouting in PCC 1:2:4 type B1 as directed by Engr-in-charge ,duly epoxy powder coated externally with approved shade, rubber gasketted, hinged front double door and back openable doors with proper locking arrangements for dust and vermin proof ,complete including adjustable thermal and fixed magnetic release MCCB 4 pole, 200 Amps, 415V, 25 KA,50 hz -01 No (incoming),suitable size cable allay, lugs,glands,Thimble and making connections and taking out old Skelton type pole mounted junction box ,all as specified and directed.

Supply and fix electric water heater, storage type steel body with Steel tank with glass linen 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

M&L for sub main wiring along with earth wire of size 2x4 sqmm+1x4 Sqmm PVC cable single core copper conductor in PVC caping and casing double lock of 25 mm width all as specified and directed.

Supply & Fix sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 A 240 Volts complete all as specified and as directed by the Engineer-in-Charge.

S&F angle valve 15 mm dia cast copper alloy type, screwed on high pressure with clutch or butterfly handle screwed bolts ends, for iron pipe fixed complete incl making good to disturbed surface as per existing complete all as specified and directed.

S&F PVC connection 15mm dia,lennth 450 mm heavy duty type complete with brass flair nuts at both ends for cold and hot water supply (ISI marked and suitable for hot water supply upto 100 degree celcius complete all as specified and directed.

KUKREJA BROTHERS (BID ID -3385582)

Shikha Enterprises (BID ID -3393805)

NITHYA INFRATECH (BID ID -3386065)

PARADISE INFRA POWER COMPANY (BID ID -3384730)

PRABHAT ENGINEERING SOLUTION AND SERVICES (BID ID -3384814)

SIDDHARTH TRADERS (BID ID -3393870)