SPECIAL REPAIR FOR REPLACEMENT OF VALLEY GUTTER ALONGWITH JOINING OF VALLEY GUTTER WITH RAIN WATER PIPES AND CONNECTED TO UNDERGROUND DRAINS IN VARIOUS HANGERS NO 301, 302, 303, 304, 305, 306, 307, 308, 309, 310 AND 312 INSIDE COD KANPUR AND PROVISIO

Amount

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern vally gutters complete all as specified and directed.

S&F 1.25mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings any shape including reveting, bolteing, solding, welding as required at site (length and girth as fixed) complete all as specified and directed.

Dismantling structural steel work including doors, gates, Valley gutter brackets but excluding framed truss etc complete all as specified and directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, flate iron as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe 290. Gde -E-165 (Brackets over 10 kg each to be measured under 'Structural Steel complete all as specified and directed.

M&L for preparation of new steel sufaces of any description exceeding 10cm width or girth applying two coats of synthetic enamal paint over and including a coat zink chrome red oxide primer complete all as specified and directed.

S&F in repair 200 mm bore PVC (SWR) soil waste, rain water pipe and vent pipes single socketed in any length with rubber ring joints fixed to walls including making good disturbe portion to match the existing complete all as specified and directed.

S&F in repair 200mm bore PVC (SWR) bends of any radius with access door including making good disturbe portion to match the existing complete all as specified and directed.

S&F in repair rain water pipes of mild steel black sheet 0.5 thick and 110mm bore in suitable length and shape including welding as per site requirement complete all as specified and directed.

Demolition of RCC (reinforced cement concrete) of any description in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl removing demolished material from site complete all as specified and directed.

M& L for providing precast cement concrete in 1:2:4 type B1 (using 20 mm graded stone aggreate) as in manhole cover slabs complete all as specified and directed.

M&L for Mild steel TMT bars 8 mm dia & over, cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Demolition of brick work of any description and in any position built in cement mortar including quoins arches and pillars complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan built any radius in half brick thick wall built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed.

M&L Plain cement concrete (1:2:4), type B-1, (using 20 mm graded stone aggregate) as in coping, bed plates & other similar works, including necessary form works wearthering, slightly rounded angles and theading, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair/unfair faces of brick or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D-2,(using 40 mm graded crushed stone aggregate) as in bed of drains including from works / moulds etc complete all as specified and directed.

S&F in repair of joining valley gutter with rain water pipes with clamps,welding, cleats with suitable length and shape and as per site requirement complete all as specified and directed.

M&L for Solid PVC wall lining consisting of 5 mm thick single side prelaminated PVC sheet and incl side border used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame incl PVC beading in same colour at bottom and top as per design as approved by the Engineer in charge complete all as specified and directed.

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as directed by Engineer-in-charge complete all as specified and directed.

Material and labour glazed ceramic coloured tiles joint free of size 450x300x7mm thick in walls etc set and jointed in neat cement slurry and pointing in white cement over and including 10mm rendering on fair faces of wall 1:4 cement complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of concrete or brick, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper on surfaces of wall over and including a coat of primer complete all as specified and directed.

Sanjay Traders (BID ID -3333440)

M/S S.B. Singh and Sons (BID ID -3333882)

M K Engineers and Contractors (BID ID -3333616)

GUJRAL BUILDERS (BID ID -3333320)

M/s Vatsh Raj and co (BID ID -3333363)

J.B.ENTERPRISES (BID ID -3333089)

M/s Vimal Traders (BID ID -3333070)