Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹5.3 Cr
EMD Value
₹10.6 L
Closing Date
4 Dec 2026, 11:00 am
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
WORKS
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V crores whichever is less where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of GCC 2022 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(i): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity. (iii) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 the Standard General Conditions of Contract or through subcontractor fulfilling the requirements as per clause 7 the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract and also follow the advance correction slips to GCC 2022
Defination of Similar Work :- One Single Similar nature of work in Eligibility Criteria means - The Tenderer should have experience in execution of high voltage [33kV/22kV/11kV] electrical system works of various types of installations.
13 conditions · 3 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of bids)..
The tenderer shall be required to submit Bid Security Declaration in lieu of Earnest Money Deposit. The provision has been made in IREPS for the bidder to mandatorily submit the following declaration along with his offer.
All terms and conditions available in the tender document are binding on the tenderers.
Railways reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning any reason for such action.
Eligibility criteria is applicable as per GCC 2022 of tender documents.
Sundaraperumal Kovil - Aduthurai section - Doubling Line - Electrification of service buildings, Platforms, FOBs, LC gate lodges and modification of HT and LT power line crossings by UG cables - Works Contract.
E148-CN-TPJ-TF-060~SR
E148-CN-TPJ-TF-060
Open
Works - General
11 Months
Unknown (Unspecified Location)
₹0
₹10.6 L
11 Nov 2026
11 Nov 2026
20 Nov 2026
55 items across 2 schedules · ₹1,38,45,385 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire | Metre | 1640.00 | 267 | 4,37,880 |
| 2 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | Metre | 2350.00 | 311 | 7,30,850 |
| 3 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire | Metre | 2405.00 | 373 | 8,97,065 |
| 4 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire | Metre | 1400.00 | 482 | 6,74,800 |
| 5 | 20 mm | Metre | 300.00 | 151 | 45,300 |
| 6 | 25 mm | Metre | 6040.00 | 168 | 10,14,720 |
| 7 | 50 mm | Metre | 100.00 | 316 | 31,600 |
| 8 | 5/6 A switch | Each | 650.00 | 121 | 78,650 |
| 9 | 15/16 A switch | Each | 95.00 | 176 | 16,720 |
| 10 | 3 pin 5/6 A socket outlet | Each | 84.00 | 136 | 11,424 |
| 11 | 6 pin 15/16 A socket outlet | Each | 95.00 | 219 | 20,805 |
| 12 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. | Each | 100.00 | 47 | 4,700 |
| 13 | 4 Module (125mmX75mm) | Each | 78.00 | 401 | 31,278 |
| 14 | 8 Module (125mmX125mm) | Each | 50.00 | 517 | 25,850 |
| 15 | 12 Module (200mmX150mm) | Each | 70.00 | 614 | 42,980 |
| 16 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. | Each | 647.00 | 104 | 67,288 |
| 17 | Upto 450 mm sweep | Each | 42.00 | 556 | 23,352 |
| 18 | 6 way, Double door | Each | 24.00 | 2,390 | 57,360 |
| 19 | 6 way (4 + 18), Double door | Each | 7.00 | 5,299 | 37,093 |
| 20 | Single pole | Each | 222.00 | 285 | 63,270 |
| 21 | 25 A | Each | 17.00 | 2,141 | 36,397 |
| 22 | 40 A | Each | 7.00 | 2,512 | 17,584 |
| 23 | 63 A | Each | 7.00 | 3,597 | 25,179 |
| 24 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. | Each | 16.00 | 1,806 | 28,896 |
| 25 | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. | Each | 4.00 | 315 | 1,260 |
| 26 | Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. | Each | 32.00 | 340 | 10,880 |
| 27 | For 6 way, Double door SPN MCBDB | Each | 24.00 | 834 | 20,016 |
| 28 | For 6 way, Double door TPN MCBDB | Each | 7.00 | 1,223 | 8,561 |
| 29 | For 8 way, Double door TPN MCBDB | Each | 7.00 | 1,448 | 10,136 |
| 30 | 32 A TPN | Each | 7.00 | 10,711 | 74,977 |
| 31 | 63 A TPN | Each | 12.00 | 12,116 | 1,45,392 |
| 32 | 100 A TPN | Each | 15.00 | 14,902 | 2,23,530 |
| 33 | 300 mm width X 50 mm depth X 1.6 mm thickness | Metre | 420.00 | 1,062 | 4,46,040 |
| 34 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. | Metre | 190.00 | 7,658 | 14,55,020 |
| 35 | 40 watt | Each | 770.00 | 779 | 5,99,830 |
| 36 | 72 watt | Each | 432.00 | 2,578 | 11,13,696 |
| 37 | 1200mm, BEE 5 star rating, service value 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) | Each | 96.00 | 2,882 | 2,76,672 |
| 38 | 1400mm, service value 6.0 CM/Min/Watt, air delivery 245 CM/Min (Minimum) | Each | 180.00 | 2,737 | 4,92,660 |
| 39 | Upto 35 sq. mm | Metre | 6460.00 | 47 | 3,03,620 |
| 40 | Above 35 sq. mm and upto 95 sq. mm | Metre | 1300.00 | 72 | 93,600 |
| 41 | Above 95 sq. mm and upto 185 sq. mm | Metre | 800.00 | 97 | 77,600 |
| 42 | Supplying, Installation, Testing and Commissioning of making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 1°Cm including inscription duly engraved as required. | Each | 20.00 | 683 | 13,660 |
| 43 | Supplying, Installation, Testing and Commissioning of cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. | Each | 145.00 | 598 | 86,710 |
| 44 | 3½ X 120 sq. mm (45mm) | Each | 28.00 | 710 | 19,880 |
| 45 | 4 X 16 sq. mm (28mm) | Each | 312.00 | 366 | 1,14,192 |
| 46 | 4 X 25 sq. mm (28mm) | Each | 165.00 | 373 | 61,545 |
| 47 | 4 X 50 sq. mm (35mm) | Each | 42.00 | 489 | 20,538 |
| 48 | Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required. | Day | 10.00 | 111 | 1,110 |
| 49 | Dismantling of pole/ street light standard/ strut embedded in brick ballast foundation etc. as required. | Day | 6.00 | 2,543 | 15,258 |
| 50 | Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. | Set | 48.00 | 370 | 17,760 |
| 51 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. | Set | 48.00 | 1,086 | 52,128 |
| 52 | Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. | Set | 16.00 | 2,854 | 45,664 |
| 53 | Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 meters. | cum | 2155.00 | 830 | 17,88,650 |
| 54 | Supplying, Installation, Testing and Commissioning of 20 mm nylon rope all the accessories Floater Grit Clamping both sides etc. complete as required. | Numbers | 600.00 | 69 | 41,400 |
| Schedule total | ₹1,20,53,026 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC2022railway.pdf
ATTACHMENT
GCCACS1-6.pdf
ATTACHMENT
GCCACS7-10.pdf
ATTACHMENT
GCCACS11..pdf
ATTACHMENT
GCCACS12..pdf
ATTACHMENT
TenderConditionsDocument27102023.pdf
ATTACHMENT
SpecificationTF060..pdf
ATTACHMENT
ScopeofworkTF060.pdf
ATTACHMENT
2026_06_16Acceptanceofe-BankGuaranteee-BGinWorksContractsandPGMS_PMS_PSSAGC.pdfSECURED.pdf
ATTACHMENT
AnnexureVVA.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .