Under District Lucknow, Construction of drain and road from Shravan Kumar Vishwakarma house to pond in Bhairampur of Gram Panchayat Mirkhnagar, Lot No 3

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in width as well as 10 sqm on plan) including getting out and disposal of excavation earth lead upto 50 m and for all lift , as directed by Engine

Providing and laying in position cement concrete 1:4:8 (1cement, 4 coarse sand (zone-III), 8 graded stone aggregate 40 mm Nominal Size) excluding the cost of centering and shuttering- All work upto plinth level as per PWD (SCH.)- 273 Ref. to DAR 4.1.8

Brick work with common burnt clay (non modular) bricks of class 150 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) as per DSR 6.1.1.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates (13.2 mm and 11.2 mm grits in ratio 2:1) either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.Bitumen (S-90)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 Bitumen (S-90)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering in 1:1.5:3 (1 cement: 1.5 coarse sand (zone- III): 3 graded stone aggregate 20mm nominal size). All work upto plinth level Ref. to DSR 4.1.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement: 1.5 coarse sand (zone- III): 3 graded stone aggregate 20mm- All work up to plinth

12mm Thick plaster with cement mortar in proportion of 1:4 (1 cement: 4 coarse sand) as per DAR 13.4.1

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of work and including supply of all steel and wast

Supply and fixing of Mild steel road sigboard of 1.5/1.2 M.S. Steel and 2.1m height including, painting, writing, fixing and also including supply of all materials, labour and T&P required for proper completion of the work.

Please Enable Macros to View BoQ information