Karnataka

AOC

Works

Water supply/sewage lines

PROVIDING FHTCS TO 324 HOUSEHOLDS IN KARLE HABITATION OF KARLE VILLAGE BELAGAVI TALUKA IN BELAGAVI DISTRICT THROUGH SINGLE VILLAGE SCHEME OF KARLE VILLAGE BELAGAVI DITSIRCT

Rural Drinking Water and Sanitation Department

RWSSD Division Office Belagavi | Karnataka

Amount: ₹76.3 LCloses: 22 Jan 2026Closed

Timeline

Published14 Jan 2026
Closed22 Jan 2026
Awarded14 Jan 2026

Bids

1 Bid14 Jan 2026

#	Company	Amount	Status
1	MARUTI D PATIL ₹76.3 Laccepted-aoc	₹76.3 L	accepted-aoc

Tender Value

₹76.3 L

EMD Value

₹76,000

Closing Date

22 Jan 2026, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Drinking Water and Sanitation Department

Contact Person

EXECUTIVE ENGINEER

Office Number

Work Description

PROVIDING FHTCS TO 324 HOUSEHOLDS IN KARLE HABITATION OF KARLE VILLAGE BELAGAVI TALUKA IN BELAGAVI DISTRICT THROUGH SINGLE VILLAGE SCHEME OF KARLE VILLAGE BELAGAVI DITSIRCT

Tender Information

Tender ID

RWSSD/2025-26/WS/WORK_INDENT9233/CALL-2

Reference Number

RWSSD/2025-26/WS/WORK_INDENT9233/CALL-2

Tender Type

Reserved

Product Category

Water supply/sewage lines

Form of Contract

Two Tender Document System(Two Cover)

Location

RWSSD Division Office Belagavi

Source Website

Subscribe to view

Documents Required

12 documents required · 12 mandatory

Technical Bid

RequiredPWD Department The Tenderer should possess valid registration Certificate as mentioned in KW docu

RequiredPAN CARD COPY

RequiredGST REGISTRATION COPY

RequiredAccurate Postal address and phone Mobile Number

RequiredCast CAT1 Category Certificate should be enclosed

Requiredtender capacity Tenderer must have assessed available tender capacity as per formula in KW documents

RequiredUnconditional line of credit from Banker of a nationalized Bank Scheduled Bank liquid assets amounting to 30percent of amount put to tender as mentioned in KW docu

RequiredResidential Certificate

Requiredongoing work The Tenderer must submit ongoing work commitments certified by an officer not below the rank of Executive Engineer to compute available tender capacity

RequiredWork done certificate details as mentioned in KW docu

Requiredtender capacity Tenderer must have assessed available tender capacity as per formula in KW documents

RequiredAchieved in at least One financial yearsa minimum financial turnover in all classes of civil engineering construction works only of Rs.152.64Lakhs

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as CAT-1 category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Corrigendums modifications correction if any will be published in the website only.

All materials should be in good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same.

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the orginal documents before approval.

To qualify for award of this contract, each tenderer should give all details and documents as per

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

All the materials to be utilized for the work must be tested in authorised labs and quality control test reports must be enclosed to the bills. All types of pipes and pumping machineries with Accessories and other materials must be tested by third party agencys. Cost of all QU tests must born by contractor

If any date in the tender time table is government holiday, next working date will be considered

Incomplete / conditional tenders will not be accepted.

Tenderer must submit his present accurate postal address and phone / cell phone number

The tender may be cancelled at any stage without assigning any reason

The rates of items are inclusive of cost of materials, labour charges, HOM of machinery, all lead and lifts and all other charges to complete the work successfully as per specifications and as directed by engineer in charge of work

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form.

Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer,

Bidder should Submit only unconditional Line of Credit in the prescribed format only from the Bank

Third party consults may be engaged for checking quality and quantity of work and to prevent any misuse. proper reporting methods trough these agencies and their comments to be reviewed addressed immediately at district level. quality of work is of most importance.

As per Karnatka State Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter No.PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare Fund. & Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders.

Materials like pipe, CI pipe, cement aggregate sand etc., required for the work shall be procured by the tenderer themselves and shall be of standered quality as per IS specifications and should get tested by the quality control authority before used to the work at his own cost.

The work should be carried out in accordance with the standard specifications specified by the department.

The work should be executed strictly as per the tender specification mentioned. Contractor should arrange for quality check at different stage of work for quality assurance as per direction of Engineer-in-charge during the work in progress and after completion. If any failures found the cost will be recovered from the contractor and will be recommended for black listing immediately.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders.

Tenderers must have valid PWD registration and must submit PWD registration copy Class III & above

Achieved in at least One financial yearsa minimum financial turnover in all classes of civil engineering construction works only of Rs.152.64Lakhs.usually not less than two times the estimated annual payments under this contract The Consolidated Annual Financial turnover certificate for the relevant financial years certified by an ICAI registered Chartered Accountant along with UDIN number also the audited financial statements for each of the financial years to be submitted. The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number and duly notarized by Notary Public.

Satisfactorilycompleted(at least 90% of the contract value), asPrimeContractor ,atleastonesimilar nature work/Any Nature of workofvaluenotlessthanRs.19.08Lakhs not less than 25% of estimated value of contract

The Tenderer should submit the Unconditional line of credit from Banker of a nationalized Bank / Scheduled Bank / liquid assets amounting to 30% of tender price. i.e. of Rs.22.90 Lakhs.

Technical Criteria

Past Experience

Satisfactorilycompletedat least 90% of the contract value, asPrime Contractor ,at least one similar nature work/Any Nature of work of value not less than Rs.19.08 Lakhs not less than 25% of estimated value of contract

Work Done Certificate

Executed at least any three of the following minimum quantities of works: Pipeline work CI/MS/DI/ PVC/HDPE/GI of at least 3781.60 Mtr lengthnot less than 80% of estimated length as per DPR.Earthwork excavation of atleast1876.71Cum not less than 80% of estimated volume as per DPR. Concrete work of atleast 162.78 Cum not less than 80% of estimated volume as per DPR.

Others -- Quantitywise works

Capabilities of Vendor

Tenderer must have completed physical work done as prescribed in bid document format (Executed at least minimum quantities of works as per prescribed in the bid documents)

Work Done Certificate

The Tenderer should possess valid registration of appropriate Class with PWD Department of Class III and Above

PWD Registration Certificate (Class I/II/III/IV)

PAN Card copy

Others -- pan card

GST Registration copy

GST Registration

Tenderer must have assessed available tender capacity as per formula in KW documents

Others -- Tender Capacity

Financial Status

The Tenderer should submit the Unconditional line of credit from Banker of a nationalized Bank / Scheduled Bank / liquid assets amounting to 30% of tender price. i.e. of Rs.22.90 Lakhs

Line of Credit

Achieved in at least One financial years a minimum financial turnover in all classes of civil engineering construction works only of Rs.152.64 Lakhs usually not less than two times the estimated annual payments under this contract The Consolidated Annual Financial turnover certificate for the relevant financial years certified by an ICAI registered Chartered Accountant along with UDIN number also the audited financial statements for each of the financial years to be submitted. The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number and duly notarized by Notary Public

Others -- financial turnover

Others

Accurate Postal address and phone / Mobile Number

Others -- Address proof

The Tenderer must submit ongoing work commitments (certified by an officer not below the rank of Executive Engineer) to compute available tender capacity

Others -- On going Works

Provide the list of key and critical equipment required for the work in the table given in the KW doc

Others -- List of Key and Critical Equipment list

Fee & Financial Details

Tender Fee Amount

₹1,910

EMD Fee Amount

₹76,000

Important Dates

Last Activity

14 Jan 2026

Published

14 Jan 2026

Bid Opening

23 Jan 2026

Download Ends

22 Jan 2026

BOQ Preview

•

Costruction of Pump House 3.0x3.0m cum DI Unit Room

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

•

Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete with all lead, lifts, loading & unloading charges includ...

•

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Proving Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C work including straightening , cutiing , bending , placing, in position ,binding and anchoring to adjacent member...

•

Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2(Phase & Neutral)& 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS...

•

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete 10"x7"x3" (254x...

•

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing of T5 Fluorescent Tube with 14W power consumption with low 3mg Mercury content & below 40% glass content than TS lamp & 20% less phosphor coating than T8 with initial lumen on 135...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

•

RCC Hume pipe pump house at Proposed Open Well

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand : for Below & Above GL complete with all lead, lifts, loading & unloading charges i...

•

Providing and Filling in foundation with granite / trap broken metal 100mm and down size with approved M-Sand including hand packing, ramming, watering including cost of all materials and labour with ...

•

RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5...

•

Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,c...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fo...

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,...

•

Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, s...

•

Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for: Cutting Cement Concrete Road surfac...

•

Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for: Cutting asphalt Road surface by Mac...

•

Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for: cutting in Macadam road surface com...

•

Supplying, laying and jointing HDPE pipes of specified grade and

•

conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and...

•

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...

•

Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. ...

•

Supplying and fixing surface box of required dia. and size with synthetic lid for valves or spindle rods. The surface box should be usable for 50 to 400mm dia. valves, PN 10 / 16 and will consist of l...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...

•

Valve Chamber ( no's) : Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soil...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Repairs to Existing of ELSR (1.0 Lakh Capacity 9.00m Staging)

•

Cleaning of Water Storage Tank or Sump by following method: (1) Empty theTank/ Sump and make it to near dry, (2) Apply bleaching powder uniformally (@Tank capacity x 0.5 gms/litre) inside the Tank/ Su...

•

Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation o...

•

Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...

•

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

•

Finishing walls with water proofing cement paint of required shade :New

•

work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after

•

thoroughly brooming the surface to remove all dirt, dust, ...

•

Repairs to Existing of GLSR 50000Ltr Capacity

•

Distribution Pipe line

•

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

Providing,Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including te...

•

Functional house tap connection FHTC 454 No

•

Approved make Electro fusion saddle comply with BS EN 12201 - 3:2011, PN 12.5 rating and food grade raw material as per BS 6920 for effect on water Quality intended for ...

•

Flow control Valve 5LPM/10LPM/15LPM : Providing, & fixing Flow control valve using food grade materials SS 316 ball /1/2" [15mm] including cost of all materials, labour charges, HOM and testing comple...

•

Supplying MDPE pipe grade PE80 6kg/cm2, 5.3mm thick complete as per specifications MDPE pipe 20mm dia complete with all lead, lifts, loading & unloading charges including cost and conveyance of all m...

•

Providing and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...

•

Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...

•

Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI union confirming to IS 1239-II, 1991 with latest amendments if any : 15 mm dia GI union complete with all lead, lifts, loadin...

•

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: 15mm dia GI elbow complete with all lead, lifts, loading & unlo...

•

Supply and fixing of HDPE water meter box with locking arrangementto protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm x...

•

Providing and fixing brass bib cock of approved quality : 15mm Brass bib cock complete with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipm...

•

Demarcation Stone : Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , a...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

NOTIFICATION NO18 final.pdf

Others - notification • 0.44 MB

KARLE KW3 CAT1.docx

Tender Document • 0.20 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

MARUTI D PATIL

₹76.3 Laccepted-aoc