PROVN OF FACILITIES AT BLDG NO P 137 PROVN OF MONKEY CAGING FOR WATER SYNTAX TANK AT CERTAIN OFFICES INSIDE DEPORT AREA PROVN OF CYCLE AND BIKE PARKING SHED INCLUDING INTERLOCKING HARD STANDING AT SEC HOSPITAL PROVN OF CHAIN LINK FENCING IN BLDG

Amount

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1. 5 metre in depth; for foundation or for manholes not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified.

Returning filling in, including spreading, levelling, watering and well ramming in layers each not exceeding 25 cm depth in soft/loose soil complete all as specified.

M & L for brick work with sub-class 'B' bricks, straight or curved on plan toany radius in half brick thick wall built in cement & sand mortar 1:4, complete all as specified.

M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6.0 metre mean radius as wall built in cement & sand mortar 1:6, complete all as specified.

M&L for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces complete all as specified.

M&L for rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces including finishing the surface even and smooth, complete all as specified.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base, complete all as specified.

M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over 15 mm thick screed bed in CM 1:6, complete all as specified.

M&L for glazed ceramic tiles, coloured/printed tiles in vertical surface of size 450x300x7 mm thick, laid over 15 mm thick rendering in cement mortar (1:3) and set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles, complete all as specified.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/path laid in panel surface finished even and smooth without using extra cement complete all as specified.

S & F for Solid PVC Door Frame of the size 50 x 47mm made out of 5 mm PVC sheet. The door profiles are to be reinforced with 19x19mm M.S Square tube. The profile shall be cut and mitred at two corners and joined by inserting 2nos. of 150mm long brackets of 15x15mm M.S. square tube inside the 19mm x 19mm M.S. square tube and suitably screwed complete all as specified.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified & shown on SSR 2020 (Part-II) complete all as specified.

S&F SS hinges medium weight of size 100 mm, complete all as specified.

S&F aluminium anodised,barrel tower bolts of extruded section, 200 mm length of bolt and fixed with screws, complete all as specified.

S&F 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified.

S&F Aluminium handles, cast type, anodised of 125 mm size complete all as specified.

S&F GI tubing medium grade ISI marked galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm including taking down existing steel tubing complete all as specified.

S&F GI tubing medium grade ISI marked galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm including taking down existing steel tubing complete all as specified.

S&F Bib tap, cast copper alloy, chromium plated, fancy type long body with crutch or butterfly handle, screwed down, suitable for 15 mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified.

S&F pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with long screwed shank and fly nuts, with or without lettered "Hot" or "Cold" suitable for 15 mm nominal bore iron pipe, screwed for iron pipe and fixed complete all as specified.

S&F 15 mm bore stop valves, cast copper alloy, fancy type chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified.

S&F vitreous china squatting pan,Órissa pattern size 580 x 440 mm white, with integral foot rest and CI 'P' trap complete all as specified.

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, 10 lit capacity with inlet, ball valve, float and handle including brackets complete all as specified.

S&F of Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe including waste pipe complete all as specified.

S&F Vitreous China wash basin, white, flat back, size 550x400 mm including coupling, brackets & waste pipe of polythelene of low or high density complete all as specified.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm including complete all as specified.

S&F of Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified.

M &L PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified.

S & F 1000 ltr ISI marked three layer, white colour, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position & including 20 mm brass ball valve complete all as specified.

S&F 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions complete all as specified.

Supply only PTMT ball valve of 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denisty plastic ball screwed for iron pipe (minimum wt -210 grams) complete all as specified.

S&F PVC (SWR) pipe not less than 6 Kgf/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall, ISI marked of 110 mm bore complete all as specified.

S&F PVC (SWR) pipe not less than 6 Kgf/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall, ISI marked of 75 mm bore complete all as specified.

S&F PVC (SWR) bend of 110 mm bore with access door of any radius complete all as specified.

S&F PVC (SWR) bend of 75mm bore with access door of any radius complete all as specified.

S&F PVC (SWR) vent cowl of 75mm bore complete all as specified.

M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil emulsion distemper white or tinted over one coat of water based white pigmented alkali resistant priming paint, over 1 mm thick wall care putty on Wall Surface including all necessary arrangement for execution of work complete all as specified.

M&L for preparation of new plastered surfaces and applying thouroughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work and applying two coats of cement base paint with roller application over one coat of water based white pigmented akali resistant priming paint for wall surfaces, complete all as specified.

M&L for painting to new or previously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including preparation of surfaces complete all as specified.

M&L for sand stone slabs of 50 mm thick in sun-shades cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified.

S&F rolled mild steel work Joist, channel, angle, or tee sections,Fe-410- W(Gde E-250 fixed independently, without connecting plates, etc. (cut toordinary lengths) complete all as specified.

M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified.

M&L for 60 mm thick, machine pressed precast concrete interlocking paver block with grey cement and no pigment of any shape and size as approved by GE, confirming to IS 15658-2006, M-35 Grade, over and including 25 mm thick sand cushioning complete all as specified.

M&L for machine factory made PCC block (1:2:4) type B1 using 20 mm graded stone aggregate, as in kerb stone of size 300 x 300 x 150 mm set in cement mortar (1:4), complete all as specified.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified.

S&F pre painted galvalume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm thick, sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified.

Removing surplus spoil to distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 metre above the starting point complete all as specified.

Surface excavation not exceeding 30 cm deep and average 15cm deep and getting out in soft / loose soil, complete all as specified.

M&L for broken stone or boulders in hardcore of gauge N. exc 63 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified.

M&L for 20-25 mm thick kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20 mm thick screed bed in CM 1:6, complete all as specified.

Excavation in post holes each n. exc 0.50 cum, getting out in soft/loose soil and removing surplus material n. exc 50 m and making good disturb surfaces complete all as specified.

M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundation of posts and struts, foundation, filling and mass concrete etc. complete all as specified.

S&F rolled mild steel work as Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. conforming to Fe-410W Gde E-250 quality 'A', complete all as specified.

M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified.

Pre-painted galvalume alumimnium zinc coating GI based plain steel sheet 0.50 mm thick sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified.

M&L for cement concrete (1:2:4) type B1 using 20 mm graded aggregate, in lintels upto 1.5 mm clear span, oils, steps; seismic and other similar bands, plinth courses, string courses, lacing courses parapets and railings upto 60 cm in heights coping kneelers, apex stone bed plate, water trough and the like including weathering, slightly champhered angles and throating including necessary formwork etc. complete all as specified.

S&F for Mild steel work of Fe-290 Gde E-165 as in angle iron fencing posts and struts & flat iron, drilled and countersunk for boulders running bars, including embedding in concrete and securing etc post and struts in fencing including cutting, tops to shape as directed, bent to shape, drilling holes, notching for wire etc. flat iron fillets (for securing wire mash etc.) including all necessary drilling, bolting or riveling etc. complete all as specified.

S&F for Mild steel Round bars conforming to Fe 290 (Gde-E-165) 10 mm dia and over as in horizontal vertical fillets in fencing including hooking complete all as specified.

S&F for Mild steel screw bolts (machine made) of 10 mm dia and 50 mm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified.

Supply only Chain link MS galvanised fencing, mesh size of 75 mm & nominal dia of mesh wire not less than 3 mm, complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provission of binding wire complete all as specified.

M&L for Plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. complete all as specified.

S&F for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as complete all as specified. (each line wire to be measured).

M&L for painting over surfaces of any description, n. exceeding 10 cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified.

M&L for cement concrete type B0, 1:2:4 using, 12.5mm graded stone aggregate as in platform, pedestal, string courses, lacing courses, parapets etc complete all as specified.

S&F Mild steel pressed handle of 150mm oval type, stove enamelled black complete all as specified.

S&F mild steel tee hinge of 150mm stove enamelled black, medium type, and fixed complete all as specified.

M&L for Mild steel framed work as in doors or gates of angle or other section guesset plates, flats, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to prepared for sliding with (execlusive of steel plate) also fastening and fixing complete all as specified.

M&L for Expanded metal jali weight n exc, 4Kg/Sqm, cut to lentgth, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel member complete all as specified.

M & L for concealed point wiring complete with proper colour coding using, 1100 Volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked drawn in and including PVC conduit (minimum 20mm dia) concealed in wall etc (also including cutting chiseling in wall and making good the same in CM 1:3 to match with the adjoining surfaces) with all accessories, fittings, PVC junction boxes etc, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for one light point /fan controlled by one one way switch, complete all as specified and directed. Note: Modular flush box and inner/outer plates measured and paid separately complete all as specified.

All as per item No. 70 above but for One 2pin/3 pin socket outlet 5 Amps on independent board complete all as specified.

All as per item No. 70 above but for One 2pin/3 pin socket outlet 5 Amps on same board with other switches , complete all as specified.

M&L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and in and including PVC concealed conduit having thickness not less than 2 mm with all fittings including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly.and including cutting chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching existing colour and complete all as specified. Note: colour coding is to be maintained .(Ph-Red, N-Black, Half-Yellow, Earth- Green) Note: Modular flush box and inner/outer plates measured and paid separately.

M&L for ceiling rose three terminals AC 240 volts 50Hz complete all as specified.

M&L for switch modular one way 6/5 amps 1 module complete all as specified.

M&L for switch modular one way 16/20 amps 1 module complete all as specified.

M&L for socket modular 6Amp 2/3 pin combined 2 module complete all as specified.

M&L for socket modular 16/20 Amp 2/3 pin combined 2 module complete all as specified.

Supply and fix in repairs sheet metal enclosure powder painted for MCB DB SPN 4 way double door with din rail and 200 Amp bus bar complete all as specified.

Supply and fix in repairs MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA,B Curve rating complete all as specified.

Supply and fix in repairs MCB SPN 240 Volts 6 to 32 Amps breaking capacity 10 KA,B Curve rating complete all as specified.

Supply and fixing modular metal flush box 1/2 module complete all as specified.

Supply and fixing modular metal flush box 3 module complete all as specified.

Supply and fixing modular metal flush box 8 module complete all as specified.

Supply and fixing modular white cover plate with frame 1/2 module complete all as specified.

Supply and fixing modular white cover plate with frame 3 module complete all as specified.

Supply and fixing modular white cover plate with frame 8 module complete all as specified.

Material and Labour for tube light fitting LED 20 watt with decorative end caps made out of CRCA sheet powder coated complete with housing with aluminium heat sink on back of leds ,power factor >0.9,having inbuilt surge protection device for overvoltage protection with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fitting and shall be fitted on new plastic square/round block complete all as specified.

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame complete all as specified.

Supply and installation of Split type air conditioners inverter type 1.5 Ton capacity 5 star rated including indoor and outdoor units and cordless remote with necessary copper tubing and AC current supply,single phase,240 volts and connect and testing and including all accessories outdoor unit stand complete all as specified.

M&L for circuit wiring in and including PVC casing caping with two run of PVC insulated, sheathed multistranded copper conductor of 4.0 sqmm (FRLS) and one run of PVC insulated, sheathed multistranded copper conductor 4.0 sqmm (green in color) for earth continuity conductor and connected to common earth dolly with thimble etc and making good the disturbed surface area white wash/colour wash to matching with existing colour complete all as specified. ( Note: Two run of 4.0 sqmm plus one run 4.0 sqmm of earth wire will be measured as 1RM) Note: colour coding is to be maintained.

S&F in repair of modular enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 25 Amps, 240 volts complete all as specified.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4.0 KVA complete all as specified.

Supply and fixing in trenches for suction pipe jointing GI tubing medium grade 25 mm dia including all fittings such as bends elbows tees union short pieces connectors check nuts caps plugs etc for the sizes complete all as specified. Note : Excavation and earth work will be measured and paid seperately under relevent items.

Supply and fix in repairs gun metal gate valve with iron wheel head screwed both ends for iron pipe for 25 mm complete all as specified.

M&L for drilling and taping cast iron water mains (in position) for branch connection of the internal dia 25 mm complete all as specified.

Taking out the unseviseable CI/DI pipe lines including all fittings with spigot and socket ends/flanged ends and lead joints including burning out joints and recovering lead and cleaning the pipes internal/external for reuse the size of 100 mm bore pipes complete all as specified.

Supply, laying in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 standard length of K-7 specification with outside zinc coating of size 100 mm dia complete including necessaary rubber gasket joints complete all as specified. Note :- (i) Excavation and earth work will be measured and paid separately. (ii) Rubber gasket joints shall be deemed to be included in quoted rate.

Bends tapers any type, (straight, bend, increasing, decreasing or double socket,flanged etc). Tee pieces single branch "Y" junction, double branch, cross (all sockets/flanged or socket and spigot) collars, caps and plugs of DI fittings upto 150 mm dia bore complete all as specified.

Taking up or down G.I. tubing and connection and removing the material from site of size 25 mm bore complete all as specified.

All as per item No 101 above but 40 mm dia bore

All as per item No 101 above but 50 mm dia bore

S&F GI tubing medium grade ISI marked including all fittings laid in trenches / fixed on wall of size 25 mm bore complete all as specified.

All as per item No 104 above but 40 mm dia bore

All as per item No 104 above but 50 mm dia bore

M&L in repairs gun metal gate or globe valves with iron wheel head (ISI Marked), screwed both ends for iron pipe and fixed of size 50 mm dia bore complete all as specified.

S&F in replacement of sluice valve 100 mm bore class PN-I.6 with flanged and iron wheel head, shut and open directed cast on it and including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified.

M&L in replacement of provision of brick masonry valve pit chamber of 3mm thick MS sheet and angle iron frame of 50x06 mm including black bituminous paint and 900x900x900 mm size (internal dimensions) including necessary excavation and earth work and frame with cover complete all as specified.

Cutting of existing hard standing/road/PCC path for laying of pipe line complete all as specified.

M&L of PCC 1:2:4 type C-2, 40 mm graded aggregate filling and mass concrete, road finishing, trust/protection blocks for pipe lines/ installation damaged PCC paths concrete complete all as specified.

Boring of holes under road, pavement, hard standing by manually or mechanically for laying of pipe upto 100 mm pipe complete all as specified.

Tulsi Enterprises (BID ID -3485840)