Maintenance and operation of Sewage Treatment plants(03 Nos) and connected works at Basoli area under GE Basoli

Amount

Manning and Operation of MBBR based Sewage Treatment Plant of capacity 1000 KLD, electric driven compressors, motors, pump sets, DG set etc of capacity as mentioned below for 24 hours daily in 03 Shifts from (0800 Hrs to 1600 Hrs, 1600 Hrs to 2400 Hrs and 2400 Hrs to 0800 Hrs) with 01 No well qualified operator in each shift of 8 Hrs and 01 shift of helper from (0800 Hrs to 1600 Hrs) located near Audotorium at Basoli Mil Area. (a) The operator has operate the following installed machinery:- (i) Air Compressor with startor of capacity 20 HP- 03 Nos. (ii) Feb Feed pump - 03 Nos. (iii) Filter Feed pump - 02 Nos . (iv) Dozing Pump - 02 No. (v) Treated water pump for arboriculture 10 HP -2 Nos. (vi) LT Panel - 02 Nos. (vii) DG Set 120 KVA - 01 No . (b) The operator has perform the following duties :- (i) Regulating all controll valves of inlet/outlets pipes complete. (ii) Carrying out proper chlorination as recommended by Lab. (iii) Preventing leakage from pipe line/ pump sets by providing suitable size of gland packing etc. (iv) Maintain log book of running plant and DG Set daily/as run. (v) Normal maintenance of motor pump sets, Air compressor, Lt Panels by keeping all the system neat and clean. (vi) Any major leakage/break down will be informed to JE/Engr-in-Charge. (vii) Operator on duty is responsible for running of DG Set for operation of plant when their in no electricity/shut down. (viii) Operator will not leave the installation until releiver.

Manning and Operation of MBBR based SewageTreatment Plant of capacity 200 KLD, electric driven compressors, motors, pump sets, DG set etc of capacity as mentioned below for 16 hours daily in 02 Shifts from (0600 Hrs to 1400 Hrs, 1400 Hrs to 2200 Hrs ) with 01 No well qualified operator in each shift of 8 Hrs and 01 shift of helper from (0800 Hrs to 1600 Hrs) located in Bana Singh Enclave at Basoli Mil Area. (a) The operator has operate the following installed machinery:- (i) Air Compressor - 02 Nos . (ii) Feb Feed pump - 02 Nos . (iii) Filter Feed pump - 02 Nos. (iv) Dozing Pump - 02 No (v) Treated water pump for arboricalture 2 HP -2 Nos. (vi) LT Panel - 02 Nos. (vii) DG Set 62.5 KVA - 01 No . (b) The operator has perform the following duties :- (i) Regulating all controll valves of inlet/outlets pipes complete. (ii) Carrying out proper chlorination as recommended by Lab. (iii) Preventing leakage from pipe line/ pump sets by providing suitable size of gland packing etc. (iv) Maintain log book of running plant and DG Set daily/as run. (v) Normal maintenance of motor pump sets, Air compressor, LT Panels by keeping all the system neat and clean. (vi) Any major leakage/break down will be informed to JE/Engr-in-Charge. (vii) Operator on duty is responsible for running of DG Set for operation of plant when their in no electricity/shut down. (viii) Operator will not leave the installation until releiver.

Manning and Operation of MBBR based Sewage Treatment Plant of capacity 100 KLD, electric driven compressors, motors, pump sets, DG set etc of capacity as mentioned below for 16 hours daily in 02 Shifts from (0600 Hrs to 1400 Hrs, 1400 Hrs to 2200 Hrs ) with one No well qualified operator in each shift of 8 Hrs located in Offrs Md Accn Thimmaya Enclave at Basoli Mil Area (a) The operator has operate the following installed machinery:- (i) Air Compressor - 02 Nos. (ii) Feb Feed pump - 02 Nos. (iii) Filter Feed pump - 02 Nos. (iv) Dozing Pump - 02 No (v) Treated water pump for arboriculture 1.0 HP -2 Nos. (vi) LT Panel - 02 Nos. (vii) DG Set 40 KVA - 01 No (b) The operator has perform the following duties :- (i) Regulating all controll valves of inlet/outlets pipes complete. (ii) Carrying out proper chlorination as recommended by Lab. (iii) Preventing leakage from pipe line/ pump sets by providing suitable size of gland packing etc. (iv) Maintain log book of running plant and DG Set daily/as run. (v) Normal maintenance of motor pump sets, Air compressor, Lt Panels by keeping all the system neat and clean. (vi) Any major leakage/break down will be informed to JE/Engr-in-Charge. (vii) Operator on duty is responsible for running of DG Set for operation of plant when their in no electricity/shut down. (viii) Operator will not leave the installation until releiver. Notes for Srl Item No 1, 2 & 3:- (a) The plant operator employed at side shall be ITI qualified person with minimum 02 Yrs experience in Maintenance and Operation of Sewage Treatment Plant based on MBBR Technology. (b) The Bidder intenet quote the tender shall have in possession the registration certificate with EPF as well as ECIS authorities . (c) The bidder shall provided proper uniform to the operator employed. (d) Payment of wages to the employed staff by the contractor shall not be less than minimum fair wagesnotified by the central/state Gove which ever is higher. (e) As per instruction issued by the Ministry of labour and welfare payment to the staff deployed by the contractor shall be made in their Bank Accounts and proof /records maintained shall be produced to the Engr-in-Charge/ GE for their verification. (f) Daily Attendence register maintained by the contractor shall be produced to JE/Engr-in-Charge for verification. (g) Staff deployed/employed by the contractor shall have valid security passes issued from station HQ authorities from security point of view and no un authorised person shall be allow to enter in the permises. (h) The contractor shall abide all labour law for the time being inforce. (j) Minor repairs such as replacement of burnt out nut bolts, gland packing, rubbeer gasket, greasing to bearings tightening of electric connection ete are deemed to be quoted rate and nothing extra will be paid. (k) To take care of house keeping and environmental cleanlines, area up to 10 mtr all around installatioin shall be kept absoutely neat and clean. (n) The sludge generated by the STP will be disposed by the contractor as per instruction of the Engr-in-charge. (l) Testing of effluent quality parameters shall be carried out Monthly by the department in authorised Lab and cost of these testing charges shall be born by the department. (m) Quoted rater shall be inclusive of all provision mentioned above and other terms and conditions contained in the tender documents.(n) A penalty of Rs 1000/- will be applicable in case of absent of the operator and Rs 750/- for absent of helper.

Material and labour for Cleaning work of STP of capacity 1000 KLD carried out by the contractor as per following time schedule :- (i) Bar Screen - Weekly (ii) Tube settler - Quarterly (iii) MBBR 1 - Half yearly (iv) MBBR 2 - Half yearly (v) Filter feed tank - Monthly (vi) Chlorine contact tank - Monthly (vi) Sludge drawing tank - Quarterly

Material and labour for Cleaning work of STP of capacity 200 KLD carried out by the contractor as per following time schedule :- (i) Bar Screen - Weekly (ii) Tube settler - Quarterly (iii) MBBR 1 - Half yrly (iv) MBBR 2 _ Half Yrly (v) Filter feed tank - Monthly (vi) Chlorine contact tank - Monthly (vi) Sludge drawing tank - Quarterly

Material and labour for Cleaning work of STP of capacity 100 KLD carried out by the contractor as per following time schedule :- (i) Bar Screen - Weekly (ii) Tube settler - Quarterly (iii) MBBR 1 - Half yrly (iv) MBBR 2 _ Half Yrly (v) Filter feed tank - Monthly (vi) Chlorine contact tank - Monthly (vi) Sludge drawing tank - Quarterly

Supplying and filling chemical such as Sodium Hypo Chlorite and any other chemical recommended by OEM and all as specified and directed.

Material and labour for applying one coat of cement base paint on wall after preperation of old surface complete including writing tank name and capacity in letter/figures of suitable size with synthetic enamel paint complete all asspecified and directed by Engr - in Charg.

Material and Labour to repair / maint of unserviceable booster/ centrifugal pumps of 20 HP capacity and dismantling and strip opening to complete booster/centrifugal pump under mention cap and segrigated all serviceable parts and kept at site for reuse incl replacement of bronze impellar of suitable size and bushes bearing and other required parts and making serviceable to the pump complete and servicing, cleaning,greasing, overhauling, re-alignment with lock,key,nut, bolts,washers and reassembling the same after testing complete and all as directed by engineer-in-charge

All as per description serial item No 9 above but 10 HP capacity

All as per description serial item No 9 above but 7.5 HP capacity

All as per description serial item No 9 above but 5 HP capacity

All as per description serial item No 9 above but 3 HP capacity

All as per description serial item No 9 above but 2 HP capacity

Material and Labour to repair / maint of unserviceable booster/ centrifugal pumps motor electric driven for 20HP capacity and dismantling and opening complete motor under mention cap and segrigated all serviceable parts and kept at site for reuse including rewinding motor with supper enameled wire of suitable gauge complete , and replaceing bushes, bearing check nut, and other required parts and varnishing the same including painting of motor , making serviceable to the motor complete and servicing, cleaning,greasing, overhauling, re-alignment with lock,key,nut, bolts,washers and reassembling the same after testing complete and all as directed by Engineer-in-Charge.

All as per description serial item No 15 above but 10 HP capacity

All as per description serial item No 15 above but 7.5 HP capacity

All as per description serial item No 15 above but 5 HP capacity

All as per description serial item No 15 above but 3 HP capacity

All as per description serial item No 15 above but 2 HP capacity

Supply only Contactor ML3. Make: siemens/ L&T or equivalent as approved by GE.

Supply only contact kit for ML3 contactor. Make: siemens/ L&T or equivalent as approved by GE.

Supply only contact kit for ML2 contactor. Make: siemens/ L&T or equivalent as approved by GE.

Supply only Spare coil for ML2 contactor. Make siemens/ L&T or equivalent as approved by GE.

Supply only Electronic timer (Type ET-100 of 9 to 30 sec of make siemens/ L&T or equivalent as approved by GE.

Supply only overload relay MN5 of L&T (Range 10-15 A) make siemens/ L&T or equivalent as approved by GE.

Supply only overload relay MN5 of L&T (Range 15-30 A) make siemens/ L&T or equivalent as approved by GE.

S & F MCCB 160 Amps 415 Volts 25 KA four pole, 50 hz megnetic fix type all as specified and directed

S & F MCCB 100 Amps 415 Volts 16 KA four pole, 50 hz megnetic fix type all as specified and directed Make: Legrand/ Schneider/ L&T

S & F MCCB 63 Amps 415 Volts 16 KA Three pole, 50 hz megnetic fix type all as specified and directed Make: Legrand/ Schneider/ L&T

S & F MCCB 32 Amps 415 Volts 16 KA Three pole, 50 hz megnetic fix type all as specified and directed Make: Legrand/ Schneider/ L&T

S & F MCB Triple pole 32 Amps 415 Volts 10KA all as specified and directed Make: Legrand/ Schneider/ L&T

S & F MCB Triple pole 16 Amps 415 Volts 10KA all as specified and directed Make: Legrand/ Schneider/ L&T

M&L for painting of CI/MS pipe of any size i.e. 200 mm/150 mm/100 mm dia with synthetic enamel paint by applying two coat and to match with existing colour coating complete all as specified and directed.

Standard engineers

Ms International Engineers

Ashoka Engineers

TRIVENI CONSTRUCTIONS

KALSI CONSTRUCTION CO

diamond electrical

M/S J N TRADERS

Power Electronic Engineers