Provn of PCC drain and chequered tile footpath around basketball court and PVC coated fencing with flood lights at Volley Ball Court at INS Gomantak under GE Gomantak Vasco.

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out from soft disintegrated rock all as specified and as directed.

Excavation over area not exc 1.50m deep and getting out in soft/disintegrated rock.

Excavation in post holes each not exceeding 0.5 cum getting out returning filling in & ramming earth or broken rubble mixed with earth around in layers not exc, 25cm in soft disintegrated rock.

M & L cement concrete type C1, 1:3:6 (using 20 mm graded aggregate) as in post hole and coping incl necessary form work all as specified and as directed.

M & L cement concrete type D2, 1:4:8 (using 40 mm graded aggregate) in foundation filling and mass concrete all as specified and as directed.

M & L for Pre-cast cement concrete block masonry with solid blocks,type C-1, 1:3:6 (using 20 mm graded aggr), exc. 10 cm in width and setting in mortar 1:4, complete all as specified.

M & L 15 mm thick rendering on fair faces of concrete in CM 1:4 and finishing even & smooth surfaces without using extra cement complete all as specified and directed

Material & Labour preparation of new plastered surfaces of wall and applying two coats of colour wash over a coat of white wash all as specified and directed.

S & F mild steel work as in angle iron, flat iron etc in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc including all necessary drilling etc conforming to Fe 290 Gde E-165 all as specified and as directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square length of bolt exc 5cm and n exc 10cm long and 12mm dia all as specified and as directed.

M&L TMT steel bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding withmild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bars.all as specified and as directed.

M&L TMT steel bars 8mm dia, cut length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding withmild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bars.all as specified and as directed.

Supply and fixing PVC coated MS galvanised chain link fencing of size 75mm x 75mm of any type of standard, rail straining bolts etc including provision of binding wire all as specified and as directed..

M&L for Two coats of synthetic enamel paint over one coat of primer including preparation of. new steel surfaces of any description over 10 cm width or girth not otherwise described all as spcified and as directed.

M&L for Two coats of synthetic enamel paint over one coat of primer including preparation of. new steel surfaces of any description nexc 10 cm width or girth all as spcified and as directed.

Returning, filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm deep as in soft/ disintegrated rock complete all as soecified and directed

Removing excavated material soils/soft disintegrated rock n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

S&F framed work as in door or gate (decorated type) of angle or other section with gusset plates, rail braces etc complete drilled for filling sheeting or other covering door etc to prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings and welding etc all as specified and directed by Engr-in-Charge (FE-410W Gde E-250 quality A)

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Columns, pillars, piers, posts and struts

M&L for formwork to sides of concrete foundations, footings bases of columns plinthbeam and similar works flat and rough finished surface etc.

M&L for formwork to sides of pillars, posts, struts and columns and similar works flat and rough finished surface etc.

M&L for rendering 10 mm thick on brick or concrete surfaces in CM 1:4 as in backing coat

M&L for 20 mm thick granite of any type tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.

Surface excavation n exc 30 cms deep and avg 15 cms in depth and getting out in soft/disintegrated rock.

M & L of hard core of gauge exc 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

Material & Labour for 100 mm thick PCC type D-2, 1:4:8 (using 40 mm graded aggregate), as in sub base of floor.

M&L 15 mm thick screed bed or bedding layer of cemnt mortar 1:4 for laying floor finishes.

M&L for chequrred cement concrete tiles 30cmx30cmx25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigment all as specified and directed.

M&L for cement concrete type, C2 1:3:6 (40 mm graded aggregate) as in surface channel and drain all as specified and directed.

S & F LED Flood light 300 W high power LEDs with 10 KV SPD ,IP66 protection complete including making electrical connections Make: Cat Part No LSFO-170-CDL/60 of Crompton or equivalent in /Havells/Philips/Bajaj

Supply and laying LT underground cable XLPE insulated armoured heavy duty 1100 Volts grade with aluminium conductor multistranded including centre gland lugs jointing materials etc..laid in trench or fixed it to wall including connecting testing and commissioning complete of size 10 Sqmm, 4 core.

Excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in hard/dense soil -

M/L for fine river sand for cushioning with layers of sand 8 cm before laying of cable & 15 cm after laying of cable (total 23 cm ) in trenches, duly punning to a thickness of 18 cm for cable protection complete all as directed and specified. Note:- Thickness after punning shall be measured for payment.

Supply and laying PCC cable cover class LV type 1 flat size 250mmx 150mm x 40mm

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated hard/dense soil.

S&F PVC sheathed 1100V grade flat three core muti-stranded copper conductor of size 4 sqmm connecting from SMC box to street light fitting Complete all as specifed and directed by Eng-in-Charge

Supply and fixing High density poly-ethylene pipes ( HDPE) of pressure rating 6kgf/sqcm of 20mm bore size on street light pole from street light fitting to junction box complete with all accessories . `

Supply and lay High density poly-ethylene pipes ( HDPE) of pressure rating 6kgf/sqcm and 50mm bore in mm complete to wall, ceiling or in floor. `

S & F sheet moulding compound junction (SMC) suitable for terminating 2 Nos 4 x 6/10/16 Sqmm UG cable including S&F of one in Nos MCB SP 32A including cable glandes- 2 Nos, and two way connector 1 No, including dismantling old one

M&L for cross arms bracing, supports, clamp and black plate fabricated for structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size .

Supply and fixing Prestressed concrete pole 9.0 metres long, 102x172mm at top and 102x279mm at bottom, class 10.

M&L for plain cement concrete (1:3:6) Type C-2 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete including necessary form work complete all as specified and directed.

Supply and fixing Automatic operation street light timing switch having lighting control (ON-OFF) through Astronomical Calculation of Sun rise/sun set by setting date, time and degree of longitude and latitude complete all as specified and directed suitable for three phase and neutral with under and over voltage protection relay, contactor 32A TP, MCB 40A TPN, 415 volts, 50 Hz, AC supply system, Max load 6 KW.

JINTECH

M/s Gayatri Contruction Co.

K M SUBHANAIAH

M/S jvsr constructions

M/S P S BABU

M/s RAJ CONSTRUCTION

Tara Construction