Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-Finance | ₹10.7 L | L1 | Accepted-Finance Accepted |
| 2 | L2₹12.0 L+₹1.3 L (11.7%)Accepted-Finance | ₹12.0 L+₹1.3 L (11.7%) | L2 | Accepted-Finance Accepted |
| 3 | L3₹10.7 LSame as L1Accepted-Finance | ₹10.7 LSame as L1 | L3 | Accepted-Finance Accepted |
Tender Value
₹15.0 L
EMD Value
₹29,991
Closing Date
3 Jul 2020, 5:00 pmClosed
EE
lpwd div klp
Construction of Compound wall and 2 Nos Basement for Providing Rain water Collection Tank 5000 Liter Capacity for Passenger Terminal Building for Helipad at Andrott
2020_UTL_1156_1
85/NIT/KLP/2019-20
Open Tender
Civil Works
Item Rate
90 days
lakshadweep
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
EE lpwd div klp UTL
₹29,991
8 Jul 2020
20 Jun 2020
6 Jul 2020
20 Jun 2020
3 Jul 2020
20 Jun 2020
Amount
Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 metres and lift upto 1.50 metres
Earth work excavation by manual means in foundation trenches or drains (not excluding 1.5m in width or sqm on plan)including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplusexcavated soil as directed, within a lead of 50m.Ordinary rock
Providing and laying cement concrete 1:4:8 (1 Cement :4 M Sand : 8 Granite Chips) foundation and Plinth
Reinforced cement concrete 1:1.5:3 (1 Cement 1.5 M sand 3 Granuite Chips 20mm nominal size) excluding the cost of centering ang shuttering and reinforcement.All work upto plinth level.
Foundation,footing,bases of column etc..and mass concrete
Reinforced cement concrete work in beams,suspended floors,roofs having slope upto 15 degree landing,shelves chajjas, lintels, bands,plain window sills,staircase and spiral staircase up to floor five level excluding cost of centering nd shuttering finishing and reinforcement with 1:1.5:3 (1 cement 1.5 M sand 3 graded stone aggregate 20mm nominal size)
Reinforced cement concrete work in (wall any thickness ) including attached pilasters,buttresses,plinth and string course,fillets,columns,pillars,piers,abutments,post and strut etc.upto floor five level excluding cost of centering and shuttering finishing and reinforcement with 1:1.5:3 (1 Cement 1.5 M sand 3 Graded stone aggregate 20mm nominal size)
Centering and shuttering including strutting propping etc.and removal of form work for foundation,footing,bases of columns etc. for mass concrete
Centering and shuttering including strutting ,propping etc.and removal of form work for Columns,Pillars,Piers ,Abutments,Posts and Struts.
Centering and Shuttering including strutting,propping etc.and removal of form work for Lintels,beams, girders,bressumers and cantilevers
Cold twisted steel reinforcement for R.C.C work including bending ,binding and placing in position complete
Brick work with modular bricks of class designation in foundation and plinth in CM 1:6 (1 cement 6 Metal Sand)
Brick work in super structure above plinth level upto floor five level in CM 1:6(1 cement 6 M sand)
6mm cement plaster to ceiling 1:3 (1 cement 3 M sand)
12 mm cement plaster 1:6 (1 cement 6 M sand)
15 mm cement plaster 1:6 (1 cement 6 M sand ) on rough side of single or half brick wall
Double coats 15 mm cement platser 1:3 (1 Cement 3 M sand) ornamental works such as MP tiles cuting works at top of coping
Finishing wall with texture exterior paint of required shade on new work (two or more coats applied @3.28 ltr /10 sqm) over including priming coat of exterior primer applied @2.20 kg/10 Sqm
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying apriming coat of approved steel primer usin’g structural steeletc. as required. Ingrating, frames, guardbar, ladder, railings, brackets, gates and similar works
Filling available excavated earth ( excluding rock) in trenches ,plinth,sides of foundation etc.layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering lead upto 50 mtr and lift upto 1.5 mtrs
Providing and laying cement concrete 1:5:10 (1 cement 5 M sand 10 Granite chips) foundation and plinth
Cement concrete flooring 1:2:4 (1 Cement 2 M sand 4 granite chips ) finished with floating coat of neat cement including cement slurry but excluding the cost of noising of steps etc… complete
a) 40mm thick with 20mm nominal size stone aggregate
Providing and placing sintex tank on terrace (at floor level) polythene water storage tank IS : 12701 marked ,with cover and suitable locking arrangement and making necessary holes for intel,outlet and over flow pipe but without fittings and the base support for tank. 5000 ltr capacity
Providing and fixing G.M full way wheel valve of approved quality and manufacture complete.50 mm nominal bore
Providing and fixing C.P Brass bib cock of approved quality and manufacture complete.15mm nominal bore
Providing and fixing nominal guage PVC Pipe of approved quality complete with special flange compression type fittings including trenching and re filling etc.External work.110 mm nominal bore
Providing and fixing nominalguage O.P pipes of approved quality complete with special O.P fittings (of approved make) including trunching and refilling etc.External works.50 mm nominal bore
Providing and fixing PVC pipe half round eaves gutter with M.S brackets including bolts and nuts and necessary fitting as per approved brand and manufacture etc.. complete 150mm (10 Kg/Sqcms)
Baby chips for filling of filter
Granite chips 20 mm nominal size for filling of filter
River sand for filling of filter
Providing and laying cement concrete 1:2:4 ( 1 cement: 2 M.Sand: 4 granite chips 20 mm nomoinal size) foundation and plinth
Providing and fixing nominal guage PVC Pipe of approved quality complete with special flang compression type fittings including trenching and re filling etc. External work.110mm nominal bore.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25mm including made of G.I wire of 8 gauge including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
MOHAMMED SHAHEED K K
PL MOHAMMED RAFEEK
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .