Providing GWSS Gurguri Majgaon in GP Rupi in Tehsil Nichar Distt. Kinnaur

Amount

Excavation in foundations in all kinds of soil such as pick work ,jumper work, blasting hard or soft rock chiseling where blasting is prohibited or saturated soil , lift upto 1.50 mtr stacking the excavated soil not more than 3.00 mtr clear from the edge of the excavation and then returning the stacked soil in 15 cm layers when required into plinth sides of foundation consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-Charge.

Providing and laying cement concrete 1:3:6 (1 cment:3 sand: 6 graded stone agg. 40mm Nominal size) and curring complete excluding the cost of form work in foundation & plinth

Providing & Laying Cement Concrete 1:1.5:3 (1 Cement:1.5 Sand:3 Graded Stone aggregate 20mm nominal size) and curing complete excluding the cost of form work in foundation and plinth.

In foundation,Footings,bases of columns and thelike & mass concrete.

Walls (any thickness but not less than 0.1m) including attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level)

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Lloors etc. upto 200mm. In thickness with in all leads and lifts.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillaster buttresses, plinth and string courses and the like with in all leads and lifts.

Providing in RCC work smooth finishing of the exposed surface with cement mortor 1:3 (1cement:3 sand)

Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in.

Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever upto floor two level.

Providing tor steel reinforcement for RCC work i/c bending, binding and placing in position complete upto floor two level (tor steel)

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting, fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars,ladders,railling,brackets and similar works.

Prov.and fixing of M.S sheet man hole cover with angle iron (65 mmx65mm) frame of size 0.65x0.65 welded with MS sheet 16 gauge. Whithin all leads & lifts (weight of cover & frame not less then 35Kg)

Laying & Jointing in treanches GMS tube (MG) and tube fitting (earth work in trenches to be measured and paid seprately) as per the direction of the Engineer-in-Charge including all fittings complete.

Laying , jointing in trenches HDPE (Hight Density Polyethyene pipes) of following diameter and class confirming to IS 4984-2016 with socket joint including all necessary fittings and to the entire satisfaction of Engineer-in-charge. 9Earth work in trenches to be measured and paid for Separately)

Providing and fixing wheel valve (with hand wheel)

65mm dia

50 mmdia

SUMIT KUMAR (BID ID -517698)

M/S MOHAN SINGH (BID ID -517685)