SPL REPAIR TO FOL STORAGE SHED BLDG NO T-47, T-48, BLDG NO T-61, T-62 and T-62B, 14X OR TOILET, IN THE AOR OF AGE BR-II UNDER GE 969 EWS

Amount

Demolition concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).complete as specified and directed.

M&L for 100mm thick cement concrete 1:2:4, type B2 (using 40mm graded stone aggregate) as in sub base comptete as specified and directed.

M&L screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 comptete as specified and directed.

M&L hardcore of gauge n exc. 63 mm, broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete as specified and directed.

M&L non - skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm coloured tile but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.comptete as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors.complete ads specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.as use in dados.complete as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil.complete as specified and directed.

M&L for cement concrete in foundations, filling and mass concrete 1:4:8, type D2(40mm graded stone aggregate).complete as specified and directed.

M&L for walling of random rubble, stone masonery uncoursed as built in cement mortar (1:4).complete as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in.cement mortar 1:4.complete as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.complete as specified and directed.

M&L for rendering plaster 10mm thick in cement morter 1:4 on fair faces of brick work or concrete surface finished even and smooth with out using extra cement complete as specified and directed.

M&L for rendering plaster 15mm thick in cement morter 1:4 on other side of fair faces of brick work or concrete surface finished even and smooth with out using extra cement complete as specified and directed.

M&L for preparing of newly surface on wall with three coat of distemper oil emulsion, complete as specified and directed.

Taking down chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete as specified and directed.

Taking down chowkhats or frames with shutters n.exc 1.5 sq.m each complete as specified and directed.

S&F 2nd class softwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete as specified and directed.

S&F for 40mm plain, framed, panelled shutters (any number of panels), with panels 2nd class softwood (kail) thick of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.complete as specified and directed.

S&F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.complete as specified and directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F for sheet glass 3mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each.complte as specified and directed.

S&F glazed and skeleton shutters 35mm thick in 2nd class softwood, (kail) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause8.24 (a); supplied and fitted to chowkats.complete as specified and directed.

S&F for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.complete as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.complete as specified and directed.

S&F for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 gms/sqm, all as specified

-Ditto- all as per item No 26 but except sheet

S&F plain, galvanised, mild steel sheeting 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275.complete as specified and directed.

Preparing new zinc (or galvanized) surfaces to receive painting by coating with mordant solution including washing and cleaning etc. of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified. Note:- (a) The surface of corrugated steel sheeting shall be shall be measured flat for the purpose of painting area shall be increased by 14%. (b) The surface of plain steel sheeting as in rige, hips, valley gutters, flashings etc, shall be measured flat alongwith girth (length and firth as fixed) and the area obtained shall be added to the area of corrugated steel sheeting.

Dismantling timber scantlings 40 sq. cm and over in section framed work, in any position.complte as specified and directed.

M&L for newly untreated wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying 2 two coats of synthetic enamel paint over one coat of pink primer complete as specified and directed.

Dismantling in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section complete as specified and directed

Dismantling boarding, any description, fixed in any position with nails complete as specified and directed.

M&L 4 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers one faces fixed with screws to timber frame work on walls .complete as specified and directed.

M&L 4 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers one face fixed with screws to timber frame work on ceiling in complete all as specified and directed.

M&L for plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 & n.exc. 25 sqm 2nd softwood (kail) complete as specified and directed.

Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section.as use in roof framed work.complete as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out out soft soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,.complete as specified and directed.

M&L for cement concrete in foundations, filling and mass concrete 1:3:6 type C2, (40mm gradede stone aggregate).complete as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.complete as specified and directed.

M&L for hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level use in broken stone or boulder.complete as specified and directed.

M&L for shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering.complete as specified and directed.

S&F aluminium anodised, barrel tower bolts 125mm length of extrud and fixed. complete as specified and directed.

S&F butt hinges 125mm long, heavy weight, cold rolled mild steel, and fixed complete as specified and directed.

S&F cast iron or malleable cast iron handles 150mm long, cast type, stove enamelled black complete as specified and directed.

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete as specified and directed.

M&L for RCC 1:2:4, type B0 (12.5mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete as specified and directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.complete as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite, all as specified.

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.complete as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints 110mm dia bore, laid in trenches or in floors complete as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20mm dia complete as specified and directed.

S&F tubes, 'medium grade' galvanised, 20mm dia with all fitting and fixed complete to walls and ceilings or laid in floors complete as specified and directed.

S&F in repairs stop valves, cast copper alloy, screwed down, high pressure, butterfly handle, screwed both ends for iron pipe or for unions and fixed 20mm dia complete as specified and directed.

S&F in repairs plug type bib tap, cast iron, screwed for iron pipe and fixed 20mm dia complete as specified and directed.

Dismantling water tanks and removing to store exc 500&n.exc 1000 ltr complete as specified and directed.

S&F rotational moulded polyethylene water storage tanks capcity 750 litres (cylindrical vertical with closed top) hoisted and fixed in position all specified complete as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates as use in vertical member. Size (50x50x6)mm.Fe 410-w Gde-E-250quality complete as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete as specified and directed.

M&L for particle board 16mm thick, medium density, flat pressed, single layer type or three layer type, BWR grade.complete as specified and directed.

M&L for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished.complete as specified and directed.

S&F for brass handles 75mm, cast type,polished bright.complete a specified and directed.

S&F for butt hinges, heavy weight size 75mm, cold rolled mild steel, and fixed.complete as specified and directed.

S&F decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions.complete as specified and directed.

S&F aluminium (diecast body) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and weight between 36 kg and fixed etc all as specified.

S&F 4.8 mm thick sheet glass, ordinary quality including neospin Gasket and glazing with beads fixed with metal panel pins exc. 0.5 sqm in each pane .

S&F 9 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with aluminium beading to aluminium frame work complete .(aluminium beading shall be measured and paid in respective item), all as specified.

M&L cement concrete 100mm thick in 1:3:6, type C2 (40mm graded aggregate) as in plinth protection finish even and smooth with out using extra cement specified and directed in completed.

M&L cement concrete 75mm thick in 1:2:4, type B2 (using 40mm graded stone aggregate) as in sub base.complete as specified and directed.

M&L forming 6mm thick expansion joints filled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A', 50mm deep, complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.complete as specified and directed.

Taking down cement plaster on stone/brick wall etc. including racking out joint , hacking for key,scrubbing down with water.complete as specified and directed.

M&L for preparation newly plastered undecorated surface of wall and applying three coat of white wash complete as specified and directed.

S&F for aluminium handles 150mm long, cast type, complete as specified and directed.

Refixing only soft-wood in scantlings complete as specified and directed.

M&L for second class soft-wood (kail) in scantlings fixed complete all as specified and directed.

M&L for preparation of old wooden painting surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of sythetic enamel complete as specified and directed.

S&F for fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc.complete as specified and directed.

M&L for new plain steel surfaces of any description, over 10cm in width or girth,not otherwise described two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete as specified and directed.

Demolition reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete as specified and directed.

M&L for river sand including spreading and levelling in layers n exc. 25 cm thick.complete as specified and directed.

M&L for brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius complete as specified and directed.

S&F for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W (Gde -E-250) Quality-A complete as specified and directed.

-Ditto- all as per item No 86 but except material all specified and directed.

Dismentaling of stone slabs and tiles of any description or thickness in floors, aprons etc.complete as specidied and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade with grey cement and pigment.complete as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) in sub base furnished even & fair complete all as specified and directed.

M&L cement concrete 75mm thick in 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth with out sing extra cement complete all as specified and directed.

M&L cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) 100m thick as in sub base finished even & fair complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in items 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F for old painted steel surfaces of any description, not over 10cm width or girth two coat of synthetic enamel complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded ston aggregate) in walls or retaining walls , any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

Demolition for wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete as specified and directed

M&L for weather boarding, 25mm thick second class soft wood wrought both sides, V- jointed to give 20mm laps and fixed complete all as specified and directed.

S&F sheet glass, ordinary quality and glazing with oil putty in square exc 0.5sqm in each pane 4mm thick complete all as specified and directed.

M&L for fillets, 2nd clan softwood (kail) bullnosed, splayed, chamgered or rounded on one edge or face exc 6 cm & n.exc 13 sqcm complete all as specified and directed.

M&L door stopper of aluminium alloy body and tongue, and with hand drawn steel spring fixed in floor overall length of cover plate 150mm, all as specified.

M&L door closer hydraulically regulated, designation No 2 universal type, suitable or door shutters of 701 to 850 mm in widht and of weight between 36 to 60 kg and fixed aluminium (extruded section body) complete all as specified and directed.

Demolition of stone/brick masonry but built in cement mortar or cement lime mortor complete all as specified.

Demolition of reinforced brickwork in suspended slabs, beams, lintels etc in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) 100mm thick complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling & fixing in opening as per specification & drawing complete as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F glazed and skeleton shutters 30mm thick 1st class softwood, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a), supplied and fitted to chowkats complete as specified and directed.

S&F in repair vitreous china squatting pan, 'Orissa' pattern, size 630x 450 mm white, with intergal foot rests (excluding flushing cistern and flush piep) complete as specified and directed.

S&F in repair 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, PVC connection including brackets complete as specified and directed.

Taking down steel tubing and connections, including cleaning for refixing or removal to store 15mm dia complete as specified and directed.

S&F tubes, 'medium' grade 15mm dia galvanised, with all fitting and all fitting and to walls and ceiling or laid in floors, complete as specified and directed.

S&F in repair stop valves bore dia of pipe in 15mm, cast copper alloy, screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed complete as specified and directed.

S&F in repair plug type bib taps, cast iron, screwed for iron pipe and fixed 15mm dia complete as specified and directed.

S&F of PVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors 20mm dia complete as specified and directed.

S&F PVC (SWR) bends 110mm dia complete as specified and directed

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete as specifed and directed

S&F PVC (SWR) (Single T) equal or unequal 110mm dia bore complete as specified and directed.

S&F PVC (SWR) 'S' trap 110mm dia complete as specified and directed

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with nad including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete Fe 410-w (Gde E-250) quality A including dismentaling complete as specified and directed.

Dismantling for water tanks and removing to store exceeding 500 ltr but not exc 1000 ltr complete as specified and directed.

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.

M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall with the help of heavy duty ISI mark PVC casing capping strip in any length wiring system and along with its all connected fittings accessories including providing of wooden board with bakelite sheet for housing / mounting of switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc for one light point / fan point controlled by one switch of one way point wiring system complete, all as specified & directed by EIC

-Ditto- all as per item No 121 one 3 pin 5 Amp switch socket outlet on independent board, all as specified.

-Ditto- all as per item No '121 one 3 pin 5 Amp switch socket outlet on same board with accessories, all as specified.

-Ditto- all as per item No 121 but 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 2.5 Sqmm as earth continuity conductor for 15 amps switch socket outlet on independent board, all as specified.

S&F switch piano flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed

S&F switch piano flush type, single pole, 15 amp 240 volts, complete all as specified and as directed

S&F socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed

S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with all as specified and as directed.

S&F ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body all as specified and directed

S&F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface complete all as specified and directed.

S&F in repairs MCB,DP 40 Amps 240 Volts B curve, complete all as specified and as directed

S&F MCB single pole 6-32A Amps 240 Volts B Curve complete all as specified and directed

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and directed

S& F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

S&F LED bulb 12 W, 220V suitable size from ceiling rose all as specified and directed

S&F lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed

S&F stepped type electonic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed. Make : Anchor(Roma)/Legrand/MK

S&F in repair capacitor 1.5/2 mfd suitable for 1200mm sweep ceiling fan complete all as specified and directed by Engr-in-Charge.

M&L sub main wiring with two run multi strand single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC /casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm multitrand single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sq mm , 2 Core complete all as specified and directed.

Taking down and dismantling the ceiling fan from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, spilt pins, screws, nuts and spring washers complete including, flexible chord of 24 / 0.20mm with necessary connector (for blade / body) as required after rewinding complete all as specified and directed. Note : Spares used and rewinding shall be measured and paid seperatly under relevant item.

M&L in repairs for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, RFR and removal etc

S&F in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 59Hz, RPM 1200, copper winding of sweep 300 mm complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

M/S ESS EMM ENTERPRISES (BID ID -3446634)

M/S SK ATLANTIC ENTERPRISES (BID ID -3446260)

MOHAMMAD YOUSUF MIR (BID ID -3446519)

M/S Sofi Brothers (BID ID -3449335)

M/S Thakur & Sons (BID ID -3446461)

M/S RATHER CONSTRUCTION CO (BID ID -3446297)

Javeed And Co (BID ID -3444747)

M/S Manzoor and Co (BID ID -3451977)