PROVN OF GD ROOM WITH TOILET AND BATHROOM AT MAG (GD ROOM FOR 10 X OR WITH 02 X TOILET BLOCK AND 01 X BATHROOM) AT DIPATOLI POCKET OF RANCHI MIL STN

Amount

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation, n.exc 10 sq.m on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed

Excavation over areas n exc 1.5 m deep in soft/ loose soil and getting out complete all as specified and directed.

Excavation over areas exc 1.5 m and n exc 3.00 m deep in hard/dense soil and getting out complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40mm graded stone agg as in fdn filling mass concrete, complete all as specified and directed

M&L PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) 75mm thick as in plinth protection /path etc, complete all as specified and directed

Material and labour for PCC (1:2:4) type B-0 (12.50mm graded crushed stone aggregates) as in anchoring hold fast, bed plate and benching for manholes, coping etc, complete all as specified and directed.

M&L brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in cm (1:6), complete all as specified and directed

Brick work with Sub-Class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in (1:4) cm, complete all as specified and directed

Brick work with Sub-Class 'B' bricks, in one brick thick honey comp work built in (1:4) cm, complete all as specified and directed

M/L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick/stone or concrete surfaces with water proofing compound finished surface even and smooth with using extra cement slurry with 3.00kg/Sq.m, complete all as specified and directed Note : Water proofing compound shall be measured & paid separately.

M&L 15mm thick plastering on wall concrete surfaces in CM (1:6) finished even and smooth w/o using extra cement.

M & L for 5mm thick plastering in cement mortar (1:3) finished even and smooth without using extra cement on ceiling, soffit of chajja and roof projection or other similar work, complete all as specified and directed

M&L preparation of newly plastered surfaces and applying three coats of white wash on ceiling.

M&L preparation of newly plastered surfaces and applying three coats of white wash on wall surfaces

M&L for preparation of new surface of wall of any height of bldigs and applying two coats of distemper oil emulsion white or tinted on wall surfaces by mechanical applicator complete all as specified and directed

M&L for preparation of newly plastered wall surfaces of any height of bldgs by brooming down with wire brushing, stoping and applying two coats of exterior weather coat/ plastic emulsion under one coat of primer by mechanical applicator, complete all as specified and directed (Weather coat shall be of Asian paint, Apex, ultima or equivalent as approved by GE)

M&L cement concrete 75mm thick as in sub base of flooring type C2 (1:3:6) using 40mm graded stone aggregate complete all as specified and directed

M&L Cement concrete in floors or roof 25mm thick over sub base (1:2:4) using 20mm graded aggregate finished even and smooth without using extra cement.

Returning/filling in layer n'exc 25 cm thick including spreading, levelling watering well ramming, complete all as specified and directed

Removing excavated soil to distance n'exc 50 mtr and deposited complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed

M&L hard core of gauge n'exc 63 mm of broken stone or boulders deposited spread and leveled in layers n' exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed

S&F PVC door chowkhats of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing, complete all as specified and directed

Supplied and fixed factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame as per specification & drawing with fancy type complete all as specified and directed

S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F 2nd class hardwood glazed and skelton shutters, 35mm thick, open rebated and prepared to receive glass, gauze etc with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mtred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a), complete all as specified and directed

S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F mild steel butt hinges 100mm long medium weight cold rolled, complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section and fixed of 125mm size, complete all as specified and directed

S&F Aluminium anodised barrel tower bolt of extruded section and fixed of 150mm size, complete all as specified and directed

S&F 125mm size aluminium handles, cast type anodised, complete all as specified and directed

Supply and fixing 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fix mild steel flat iron hold fast 25 x 6mm confirming to Fe 290 Gde E-165 complete all as specified and directed.

Supply and fix mild steel frame & work such as grills gratings etc, with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed

Supply and fix powder coated alu frame work such as door, window and ventilations as approved aluminium section with one or more rebates including joining cleat for fixing etc, complete all as specified and directed

Supply and fix 4 mm thick figured glass pin head type glazed with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed

S&F powder coated alumunium three track sliding glazed windows/door shutter manufactured with approved aluminium section with three sliding shutters each shuttr width one half of the length of window with the following specification and making good the adjascent surfaces :- (a) window frame of cross section 101mm x 40mm x 1.5mm thk (b) Three way trackfor sliding shutter of cross section 91.80mmx31.75mmx1.1mm thick (c) Sliding shutter frame of cross section 40x18x1mm (d) Aluminium glazing strip of size 18.2x16.66mm (e) 4mm thick float glass of superior quality for 2 shutters (f) IDPE rubber gasket for fixing of glass (g) Locking cleat per shutter 01 Nos (h) 02xsliding rollers per shutters (j) Aluminium wire cloth 0.36mm nominal dia of wire and average width ofaperature 1.40mm for one shutter (k) Fixing screws for frame with wall 06 per window with fancy design

M&L preparing new surface of steel any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed

S&F 300mm mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F UPVC pipe 15mm dia of pressure rating 10kg/sqcm concealed type complete all as specified and directed.

S&F UPVC pipe 20mm dia of pressure rating 10 kg/sqcm fixed to walls, ceiling complete all as specified and directed.

S&F 1000 ltrs capacity PVC rotational moulded polythylene water storage tank (cylindrical vertical closed top) hoisting and fixed in position. including 20mm dia of ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed with anti microbial property complete all as specified and directed

S&F 500 ltrs capacity PVC rotational moulded polythylene water storage tank (cylindrical vertical closed top) hoisting and fixed in position. including 20mm dia of ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed with anti microbial property complete all as specified and directed

M&L Ball brass valves, high pressure with polythene float and flunut complete, screwed for iron pipe or brass ferrule and fixed 20mm bore fixed in repair, complete all as specified and directed

S&F 20mm gate valve with iron wheel head, screwed both ends for iron pipe and fixed completed all as specified and directed

S&F vitreous china squatting pan, 'Orissa' pattern, size 680 x 470mm white, with integral foot rests, including 75mm "P" or "S" trap set in and including concrete, connection to trap and to flushing pipe, anti-syphonic pipe, etc complete including making good of floor (Excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed

S & F vitreous china wash down water closet pan, 'Semi Pedestal' pattern, anglo-Indian type white, (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed

S&F Vitreous china wash Basin pedestal type, angle back, size 600x480mm white excluding taps, waste,chain and plug and porcelain stopper but including brackets completed all as specified and directed.

S & Fix in repair for waste coupling of PTMT (half or full threaded). (Minimum weight 32mm- 45gms/ 40mm-60gms), complete all as specified and directed

S & F vitreous china urinal bowl type or half stall pattern, basin white including connections to flushing pipe and out going pipes fixed, complete all as specified and directed

S&F 75mm "P" trap, complete all as specified and directed

S&F 75mm cast iron Nahani Trap, fixed with cement concrete (1:2:4) complete all as specified and directed

S&F in repair Bib taps, 15 mm bore cast copper alloy chromium plated fancy (half turn) type with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repair 10 ltr capacity PVC Valveless, syphonic action with dual flushing cistern type low level, white including flush pipe 32mm bore polythylene complet all as specified and directed with fancy design

S&F in repair angle valve/ stop valve cast copper alloy fancy type chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed of size 15mm bore with fency design (half tum type) complete all as specified and directed

S&F in repairs pillar tap cast 15mm bore copper alloy fency type with capstan head chromium plated screwed down high pressure with or without lettered head "HOT" or "COLD" with long screwed shank and flynuts, screwed for iron pipe (Half turm type), complete all as specified and directed

S&F PVC Connections 15mm size and 750mm length, complete all as specified and directed

S&F 32mm waste fittings brass chromimum plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed

S&F grating square (SLIT) 150mm of PTMT (minium weight 100gms) complete all as specified and directed

S&F brass chromium plated shower rose 125mm size complete all as specified and directed.

S & F soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

S & F Tubular towel rail, 20mm dia, D type, 60 cm long between flanges CP brass including brackets complete all as specified and directed

S&Fix in repairs decorative curtain rails made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colours and pattern as approved by the Engr-in-Charge, overall dia 28 to 29mm, including provn of two nos brackets on each ends and provn of two nos of globe on each ends for each windows/door for fixing completed with fency design complete all as specified and directed

S&F stop valves, 20mm bore dia of pipe cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed, complete all as specified and directed

S&F 110mm PVC (SWR) branch pieces, single equal or unequall, complete all as specified and directed

S&F 110mm PVC (SWR) Bends any radius, complete all as specified and directed

S&F 110mm PVC(SWR) vent cowls, complete all as specified and directed

S&F 75mm PVC (SWR) branch pieces, single equal or unequall, complete all as specified and directed

S&F 75mm PVC (SWR) Bends any radius, complete all as specified and directed

S&F 75mm PVC(SWR) vent cowls, complete all as specified and directed

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed

S&F reinforced concrete 150mm (internal dia) pipes, class NP2 laid and jointed complete with collars laid in trenches on concrete bed to required slope jointed and tested complete all as specified and directed. (Note : Excavation/earth work and concrete bed shall be measured and paid for separately)

M&L plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipes of 150mm bore, laid to slope including packing under and hanuching against the sides of pipes after they are laid and tested complete all as specified and directed

M&L providing pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole cover slabs, set in CM (1:4) including necessary form work complete all as specified and directed

S&F 10mm dia and over TMT bars, cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia, complete all as specified and directed

S&F 6 to 8mm dia TMT bars, cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia,complete all as specified and directed

S&F 5mm dia and over upto 10mm dia and incluing 10mm dia stirrups TMT bars, cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia as in stirrups, spacers and biding complete all as specified and directed

S&F 32mm low density polyethylene (LDPE) pipes, complete all as specified and directed

Supply and fix in repairs stainless steel wire cloth 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples/ wooden beads to existing shutter of any description complete all as specified and directed.

S&F Non skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screedbed in CM (1:6) complete all as specified and direccted

S&F Non skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces as in skirtings, dado and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in CM (1:4) complete all as specified and direccted

M&L for coloured glazed ceramic tiles in vertical surface 350mmx250mmx7mm or 450x350x7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M/L for Machine pressed precast concrete intrlocking paver bock any shape and colour 60 mm thick M-40 grade paver block (Non skid type) with gray cement and pigment confirming to IS 15658-2006, complete all as specified and directed

M&L Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed

M&L PCC (1:2:4) type B-O, using 12.5mm graded stone aggregate as in manholes floors etc and to be finished even and smooth with suing extra cement complete all as specifed and directed

M&L Reinforced cement concrete in mix 1:1½:3 (nominal mix) using 20mm graded aggregates) in foundations, including rafts, footings, plinth beams etc complete all as specified and directed.

All as per item No 90 above but in Columns, pillars.

All as per item No 90 above but in beams and lintel

All as per item No 90 above but in floor/roof slab etc

All as per item No 90 above but as in chajja etc

M&L formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits of foundation and plinth beam, and similar work, vertical or batter work fair finished flat surface of concrete complete all as specified and directed.

All as per item No 95 but in columns/post

All as per item No 95 above but in sides and soffits of Lintel beams, lintel bends roof beam etc

Formwork to soffits of suspended slabs such as roof slabs, floor slab, chajja etc flat not exceeding 200mm thick fair finished surface complete all as specified and directed.

Forming square grooves in plaster n.exc 12mm deep and n exc 15mm on face complete all as specified and directed.

M&L for preparation of concrete roof surfaces and applying 10mm thick plaster in CM (1:4) and finished the surface even and smooth without using extra cement complete all as specified and directed

M&L for applying a coat of bitumen primer @ 0.3L/sqm on roof surfaces

M&L for applying 3mm thk APP modified polymeric membrane over the bitumen coat surface, weight not less than 3Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture insteructions compele all as specified and directed

M&L for applying two coats aluminium paint over bituminous surface of membrane, complete all as specified and directed

M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm, single core, multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn through PVC conealed conduit 20/25 mm dia on wall/ceiling, including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes, cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box, cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 104 here-in-before but one 3 Pin Socket out let 5 Amps on the same board.

All as per Ser item No 104 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board.

All as per Ser item No 104 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly.

Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed.

S&F Switch piano type , single pole , one way 15 Amps complete all as specified and directed.

S&F Socket outlet 2-in-1, 2/3 pin 5 Amps complete all as specified and directed.

S&F Socket outlet 2-in-1, 3 pin, 5 and 15 amps, flush type complete all as specified and directed.

S&F Ceiling rose 3 terminal PVC/polycarbonate complete all as specified and directed.

M&L for lamp holder, PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed

M&L for submain complete with 2x2.5 sqmm, single core, multi stranded copper conductor FR PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC casing / caping 20/25 mm dia as per site requirement along walls/ceiling etc including 2.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. Note:- (i) All three wire (Phase red colour, neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) Painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

All as per ser item No114 here-in-before but 2x4 Sqmm and 1x 4.0 Sqmm for Earth wire

Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed

S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of MCB DP 40 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles, complete all as specified and directed

S&F in replacement of LED tube light fitting 18 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver, including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed

S&F in replacement of building LED security light fitting 48 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut, bolt, washer etc complete all as specified and directed

S&F in replacement PVC ventilating air fan single phase 250 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.

Supply, Laying on replacement, connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable complete all as specified and directed

Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete all as specified and directed

Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed

Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick, complete all as specified and directed

Supply and Spread dry river sand for cable cushioning in trenches complete all as specified and directed. Note : Punned down thickness shall be considered for measurement .

Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection complete all as specified and directed

M &L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on complete all as specified and directed Note :- i) Earthing test must be carried out in presence of Engr-in-Charge. ii) The earthing result not more than 2 Ohms or disered earth resistance value. iii) Megger required for testing will be be provided at site by the contractor. iv) Contractor shall submit earth resistance testing report before submission of bill.

M/s Mukesh and company

M/S GYANITECH ENTERPRISES

M/S SAI UDYOG

Associated Engineers

Bihar traders