Providing and installation of open gym equiments in CPWD Colony at Rajya Sabha Aawas, Vasant Vihar, New Delhi during 2022-23

All kind of soil (Note: Rate will be quoted after less cost index @ 1% on DSR Item only)

1:1½:3 (1 Cement: 1½ coarse sand (Zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) (Note: Rate will be quoted after less cost index @ 1% on DSR Item only)

1:5:10 (1 cement : 5 coarse sand (Zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (Note: Rate will be quoted after less cost index @ 1% on DSR Item only)

Air Walker:- Providing, designing and fixing of Air-walker of size 1100x550x1200mm fabricated with main post of 114mm dia and 2.5mm thick and other pipes of 40mm dia 2.5mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated SO-12D micron thick using Akzo Nobel or equipment in desired shade and color. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness. UV resistant and color as approved by Engineer-in-charge. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by Engineer-in-charge. The equipment shall be filled with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment color (of metal, seal and pedal), and fixing of equipment etc. (the cement concrete and excavation work shall be paid separately).

Sit Up Station: Providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe and robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all welding points prior to finishing. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational molding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, color on metal, seat and base pedal and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Push & Pull chair:-Providing, designing and fixing of pull chair in a pair of size 2000x800x2000mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe and robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber on top end. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational molding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be filled with in built limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, color on metal, seat and base pedal and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Arm Wheel:- Providing, designing and fixing of arm wheel in a pair of size 850x800x1800mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe and robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational molding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be filled with in built limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, color on metal, seat and base pedal and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Double cross walker:- Providing, designing and fixing of double cross walker of size 1600x600x1600mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe and robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational molding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be filled with in built limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, color on metal, seat and base pedal and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Twister:- Providing, designing and fixing of twister of size 1700x1300x1300mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe and robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational molding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be filled with in built limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, color on metal, seat and base pedal and fixing of equipments etc. (the cement concret.00e and excavation work shall be paid separately).

FRP Mini Wave:- Providing, designing and installing FRP Mini Wave for age group 3-8 years of children having area 0.5mx2.5m and safe play area 1.0m x 4.0m, product height 1.2m and slide FRP. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment color on metal, seal and pedal, and fixing of equipment etc. (the cement concrete and excavation work shall be paid separately).