ARMO 2020-21 SH Supply of Electrical Spares for Day to Day Maintenance at LGBI Airport, Guwahati

Amount

Supply of 6A, 1way, ISI marked, Piano type Switch suitable for 230V, 50Hz AC supply as required. (Make Anchor, cat. No. 38069 or its equivalent from list of approved makes)

Supply of 6A, ISI Marked, 3pin Socket outlet suitable for 230V, 50Hz AC supply as required.(Make Anchor, cat. No. 38342 or its equivalent from list of approved makes)

Supply of 20A, 1way, ISI marked, Power Switch suitable for 230V, 50Hz AC supply as required. (Make Anchor, cat. No. 39991 or its equivalent from list of approved makes)

Supply of 20A & 10A, Uni Socket suitable for 230V, 50Hz AC supply as required. (Make Anchor, cat. No. 39994 or its equivalent from list of approved makes)

Supply of 20 & 10 A Combined unit of Switch and Socket having shuttered along with box and four fixing holes suitable for 230V, 50Hz AC supply as required. (Make Anchor, cat. No. 39593 or its equivalent from list of approved makes)

Supply of single module Dummy (Blanking) plate suitable for all makes of Distribution board.

Supply of 6 Amp, 3 pin Plug Top, ISI marked suitable for 230V, 50Hz AC supply as required. (Make Anchor, cat. No. 39571/51348 or its equivalent from list of approved makes)

Supply of 16 Amp, 3 pin Plug Top, ISI marked suitable for 230V, 50Hz AC supply as required. (Make Anchor, cat. No. 39582/51395 or its equivalent from list of approved makes)

Supply of call bell piano type switch (push button type) ISI marked, suitable for 230 volt, 50Hz, AC supply as required. (Make Anchor, cat. No. 38091 or its equivalent from list of approved makes)

Supply of 20W, T-8 LED tube lamp (6500 K) suitable to operate on 230 volt, 50Hz, AC supply as required.

Supply of 9W LED bulb (Pin type) (6500 K) suitable to operate on 230 volt, 50Hz, AC supply as required.

Supply of Universal batten fittings suitable for T8 LED tubes and operate on 230 volt, 50Hz AC supply as required (without tube).

Supply of 6A, angle holder (with metal ring), suitable to operate on 230 volt, 50Hz, AC supply as required.(Make Anchor, cat. No. 39797 or its equivalent from list of approved makes)

Supply of 6A, battern holder (with metal ring), suitable to operate on 230 volt, 50Hz, AC supply as required. (Make Anchor, cat. No. 39800 or its equivalent from list of approved makes)

Supply of following width and thick uPVC mini trunking, ISI marked confirming to IS:14927(Part-2) as required

a) 20 X 12 mm (Make Precision Cat No. PT 2012 or its equivalent)

b) 25 X 12 mm (Make Precision Cat No. PT 2512 or its equivalent)

Supply of PVC switch Box complete with cover plate of following sizes as required.

a) 4" x 4" (Make Anchor, cat. No. PB0404AW or its equivalent from list of approved makes)

b) 4" x 7" (Make Anchor, cat. No. PB0407AW or its equivalent from list of approved makes)

c) 6" x 8" (Make Anchor, cat. No. PB0608AW or its equivalent from list of approved makes)

d) 8" x 10" (Make Anchor, cat. No. PB0810AW or its equivalent from list of approved makes)

Supply of following sizes of Modular Plates with base(inner) plate and cover(outer) plate.

a) 3 Modular Plate (Make Anchor, cat. No. 35300WH)

b) 4 Modular Plate (Make Anchor, cat. No. 35311WH)

c) 6 Modular Plate (Make Anchor, cat. No. 35322WH)

Supply of PVC switch Box complete with cover plate of following sizes as required.

b) Yellow

c) Blue

d) Green

e) White

f) Amber

Supply of following colour 110V DC LED indication lamps of Cluster design suitable to install in the existing panel cut of sizes 22.5/30mm etc as required.

b) Yellow

c) Blue

d) Green

e) White

f) Amber

Supply of following colour 240 VAC LED indication lamps of Cluster design suitable to install in the existing panel cut of sizes 22.5/30mm etc as required.

b) Yellow

c) Blue

d) Green

Supply of following ratings 'B' series, ISI marked, 10 kA, Miniature Circuit Breaker(MCB) suitable to operate in 240/415 Volt, 50 Hz, AC supply as required

a) 6 Amp, SP MCB

b) 10 Amp, SP MCB

c) 16 Amp, SP MCB

d) 20 Amp, SP MCB

e) 32 Amp, SP MCB

f) 20 Amp, DP MCB

g) 32 Amp, DP MCB

Supply of following ratings 'C' series, ISI marked, 10 kA, Miniature Circuit Breaker(MCB) suitable to operate in 240/415 Volt, 50 Hz, AC supply as required.

a) 2 Amp, SP MCB

b) 6 Amp, SP MCB

c) 16 Amp, SP MCB

d) 20 Amp, SP MCB

e) 32 Amp, SP MCB

f) 20 Amp,DP MCB

g) 32 Amp,DP MCB

h) 40 Amp, DP MCB

i) 63 Amp, DP MCB

j) 32 Amp, TP MCB

k) 63 Amp, TP MCB

l) 40 Amp, FP MCB

m) 63 Amp, FP MCB

Supply of 100 Amp, Four pole Isolator, ISI marked, suitable to operate in 415 Volt, 50 Hz, AC supply as required.

Supply of Aluminium In Line Connectors suitable for the following sizes of XLPE insulated Aluminium conductor cable.

a) 16 sqmm

b) 25 sqmm

c) 35 sqmm

d) 50 sqmm

e) 95 sqmm

f) 120 sqmm (long barrel)

g) 185 sqmm (long barrel)

h)240 sqmm (long barrel)

i) 300 sqmm (long barrel)

Supply of Aluminium Tubular Terminals suitable for the following sizes of XLPE insulated Aluminium conductor cable.

a) 16 Sqmm

b) 25 sqmm

c) 35 sqmm

d) 50 Sqmm

e) 70 sqmm

f) 95 sqmm

g) 120 Sqmm

h) 150 Sqmm

i) 185 Sqmm

j) 240 Sqmm

Supply of Heavy duty Copper Reducer Terminals suitable for the following sizes of XLPE insulated Copper conductors cable.

a) 6 Sqmm

b) 10 Sqmm

c) 16 Sqmm

d) 25 sqmm

Supply of Heavy duty Copper Tubular Terminals suitable to the following sizes of XLPE insulated Copper conductors cable.

a) 6 Sqmm

b) 10 Sqmm

c) 16 Sqmm

d) 25 sqmm

Supply of following sizes Flame retardant Low smoke (FRLS) PVC insulated single core unsheathed industrial (multistrand) flexible cable of copper conductor suitable for voltage grade of 1100 volts, conforming to IS:694 as required.

a) 1.5 Sq.mm

b) 2.5 Sq.mm

c) 4.0 Sq.mm

d) 16.0 Sq.mm

Supply of following sizes Three core Flat Cables for Submersible Pump Motors PVC/XLPE insulated and PVC sheathed, copper conductor (flexible) industrial cable for voltage grade 1100 Volts, conforming to IS:694 as required..

(a) 4 sq.mm

(b) 6 Sq.mm

Supply of following sizes Flame retardant Low smoke (FRLS) Three core PVC insulated, PVC sheathed copper conductor (flexible) industrial cable for voltage grade 1100 Volts, conforming to IS:694 as required..

(a) 1.5 sq.mm

(b) 2.5 Sq.mm

(c) 4.0 Sq.mm

Supply of following sizes Flame retardant Low smoke (FRLS) Four core PVC insulated, round sheathed copper conductor (flexible) industrial cable for voltage grade 1100 Volts, conforming to IS:694 as required.

(a) 4.0 Sq.mm

(b) 6.0 Sq.mm

(c) 10.0 Sq.mm

Supply of following sizes of ISI marked, XLPE insulated & PVC sheathed, armoured aluminium conductor cable of 1.1KV grade as per IS 7098-1988 Part1 with upto date amendments complete as required.

a) 4C x 6 sqmm

b) 4C x 16 sqmm

Supply of 3 Phase Digital KWH meter with RS485, Flush mounted type of size 96 x 96mm for measuring the 3phase energy consumption with accuracy class of 1.0, suitable to operate in Aux supply 80-300 VAC/DC and programmable CT/PT set of 1A/5A complete (L&T make Cat no.WC400011OOOO or its equivalent from list of approved makes)

Supply of 3 Phase Digital Multifunction meter with RS485, Flush mounted type of size 96 x 96mm for measuring the 3phase multi parameters of Voltage, Amperes, Frequency, Power Factor, KW, KVA, KWh, KVAh etc., with accuracy class of 1.0, suitable to operate in Aux supply 80-300 VAC/DC and programmable CT/PT set of 1A/5A complete (L&T make Cat no.WL440511OOOO or its equivalent from list of approved makes)

Supply of 500ml CRC bottle for maintenance of panel and switch board.

Supplying of straight through heat shrinkable cable jointing kit for following size of XLPE insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade including ferrules and other jointing materials etc. as required

a) 3½ X 35 sq. mm

b) 3½ X 70 sq. mm

c) 3½ X 95 sq. mm

d) 3½ X 120 sq. mm

e) 3½ X 150 sq. mm

f) 3½ X 185 sq. mm

g) 3½ X 240 sq. mm

h) 3½ X 300 sq. mm

i) 3½ X 400 sq. mm

j) 4 X 16 sq. mm

Supplying of straight through heat shrinkable cable jointing kit for following sizes of XLPE aluminium conductor cable of 11 KV grade complete with all accessories including ferrules etc. as required.

a) 3 X 120 sq. mm

b) 3 X 185 sq. mm

Supplying of straight through heat shrinkable cable jointing kit for following sizes of XLPE aluminium conductor cable of 33 KV grade complete with all accessories including ferrules etc. as required.

a) 3 X 185 sq. mm

b) 3 X 300 sq. mm

Supplying of end termination kit (Indoor type) for following sizes of XLPE aluminium conductor cable of 11 KV grade complete with all accessories including ferrules etc. as required.

a) 3 X 120 sq. mm

b) 3 X 185 sq. mm

Supplying of end termination kit for following sizes of XLPE aluminium conductor cable of 33 KV grade complete with all accessories including ferrules etc. as required.

a) 3 X 185 sq. mm (indoor type)

b) 3 X 185 sq. mm (outdoor type)

c) 3 X 300 sq. mm (outdoor type)

Supply of following MCCB with terminal-Magnetic Release having Ics=100% Icu, with over load setting: 0.8-1.0 x In with breaking capacity of following ratings.

a) 63A, TP MCCB , 16kA

b) 63A, FP MCCB , 16kA

c) 125A, TP MCCB , 25kA

d) 125A, FP MCCB , 25kA

Supply of Finned Strip space Heaters of 500 Watt capacity of 228mm length, width 65mm and thickness of 35mm complying to IS 3724 suitable to operate on 230 Volts, 50Hz, AC supply (Make GIRISHEGO Model No. SERF- 9 or its equivalent)

Supply of space Heaters of 200 Watt capacity of 275mm length, having stainless steel shreated cartridge heating elements in perforated sheet metal enclosure and porcelain terminal block is provided for electrical connection suitable to operate on 230 Volts, 50Hz, AC supply (Make GIRISHEGO Model No. SH/020/275 CE or its equivalent)

Supply of 2.5 microfarad ceiling fan type capacitor suitable to operate on 230 volt, 50Hz, AC supply as required.

Supply of 25Amps, 3 Pole Power Contactors along with Side mounting 1NO and 1 NC Auxiliary contacts Blocks suitable for operation on 440 V, 50 HZ, 3 phase AC supply etc. as required. (Make L&T MNX25 Cat No. CS94110 or its equivalent from list of approved makes)

Supply of 40Amps 3 Pole Power Contactors along with Side mounting 1NO and 1 NC Auxiliary contacts Blocks suitable for operation on 440 V, 50 HZ, 3 phase AC supply etc. as required. (Make L&T MNX40 Cat No. CS94190 or its equivalent from list of approved makes)

Supply of Astronomical Time Switch for automatic switching of High Mast & Street Lights complete as required. (Make L&T Cat No. AUTS02AST00 or its equivalent from list of approved makes)

Supply of following ratings, 4 Pole motorised automatic transfer switch along with controller with wire harness and protections suitable for operation on 440V, 50Hz, AC supply

a) 100A (Open execution)

b) 160A (Open execution)

c) 100A (In sheet steel enclosure) with Auto Mains Failure (AMF) facility

Supply of MOV based Surge Protection module having Imax=40kA, In=20kA, Uc 5000V, Up=21kV and Ts=25ns for CCR output

Supply of following sizes of PVC MCB enclosures complete with din rail

a) 2 Module

b) 4 Module

Supply of Electrical panel door lock (Stainless steel) suitable for installation on existing panels and for 20mm dia nominal hole size

Supply of Giant Indian National flag of size 20'x 30' in 100% knitted polyester with reinforced super-strong nylon webbing on all 3 sides & eye lets and Flag shall confirm to the Flag code of India, 2002.

Supply of Heavy duty Power factor correction capacitors of following rating suitable to operate in 3Ph, 415V, 50Hz AC supply with voltage rated of 440V, over current withstand capability of 1.8times rated current confirming to IS:13340-1993, IS:13341:1992 etc., as required.

a) 25 kVAr (Box type)

b) 10 kVAr (Box type)

c) 5 kVAr (Box type)

Supply of constant current LED driver (Make: Bajaj, cat no : BGD 36 240 5Y) compatable for existing 90W Bajaj make LED street light fitting of model /cat. No. BRTFG 44 LED 90W and suitable for operation on 230V, 1Ph, 50Hz AC supply as required.

Supply of constant current LED driver (Make: Bajaj, cat no : BGD 66 210 5Y) compatable for existing 150 W 'DURANTO' highbay luminaire light fitting of model /cat. No. BGHB 150W LED and suitable for operation on 230V, 1Ph, 50Hz AC supply as required.

Supply of constant current LED driver (Make: Bajaj, cat no : BGD 36 10 OI) compatable for existing 36 W Recess mounted 2x2 luminaire LED light fitting of model /cat. No. BZRSQL 36W GZ WH and suitable for operation on 230V, 1Ph, 50Hz AC supply as required.

Supply of constant current LED driver (Make: Bajaj, cat no : BGD 36 05 OI) compatable for existing 18W Bajaj make Surface mounted 1x1 LED luminaire LED light fitting of model /cat. No. BZRSQL 18W WH and suitable for operation on 230V, 1Ph, 50Hz AC supply as required.

Supply of constant current LED driver (Make: Bajaj, cat no : BGD 50 035) compatable for existing 18W Bajaj make Recess mounted downlighter LED light fitting of model /cat. No. BZSLH 18W WH and suitable for operation on 230V, 1Ph, 50Hz AC supply as required.

Supply of constant current LED driver (Make: Bajaj, cat no : BGD 36 035) compatable for existing 12W Bajaj make Recess mounted downlighter LED light fitting of model /cat. No. BZSLH 12W WH and suitable for operation on 230V, 1Ph, 50Hz AC supply as required.

Supply of transformer oil conforming to IS 335:1993 with update amendments in a sealed drums as intended to use as coolant in the transformers including submission of test report as required

Supply of Silica gel suitable for power transformers Breathers

Supply of EPDM / Rubber gasket of 3-5mm suitable for installation on existing panel doors

Supply of heavy duty Cast Iron/Galvanised iron Earth Pit Cover of size 300mm x 300mm with frame.

Supply of followings ratio of indoor resin cast ring type low tension current transformors of burden 15VA, Accuracy class 1.0.

a) 400/5A CT's (Set of 3 Nos)

b) 250/5A CT's (Set of 3 Nos)

c) 100/5A CT's (Set of 3 Nos)

Supply of 33KV Complete Pole Assembly (single pole) compatable for installation on existing 33 KV VCB of Kirloskar Electric Company Ltd make & Type VRK 36-3 complete with factory fitted vaccum interruptor, arm contacts all internal and external accessories etc complete for operation on 33 KV, 3 Phase, 50Hz A.C. supply

Supply of Cast resin moulded Dual core Current Transformer (Make : PRAGATI ELECTRICALS PVT LTD) suitable for 33KV HT VCB Panel (Make : Kirloskar Electric Company Ltd, Type : S36 VCB) and for operation on 33 KV, 3 Phase, 50Hz A.C. supply of following specifications ( Set of 3 nos) (a) Ratio : 100/1 (Core 1), 100/1 (Core 2) (b) VA : 15 (Core 1), 15 (Core 2) (c) S Term : 1S1-1S2, 2S1-2S2 (d) Class 1.0, 5P10 (e) Type (Des) : 33E (f) Model : A1720-1 (g) Type : Wound (h) IL : 36/70/170 KVp (i) HSV : 36 KV (j) STC : 25 kA for 3 sec (k) Freq : 50 Hz (l) Insulation Class : B (m) Standard : IS : 2705/1992

Supply of Cast resin moulded Earthed type Potential Transformer (Make : PRAGATI ELECTRICALS PVT LTD) suitable for 33KV HT VCB Panel (Make : Kirloskar Electric Company Ltd, Type : S36 VCB) and for operation on 33 KV, 3 Phase, 50Hz A.C. supply of following specifications ( Set of 3 nos) (a) Type : Earthed (b) Pri (Volts) : 33000/V3 (c) Winding : Sec1 (d) Volts : 110/V3 (e) VA/PH : 200 (f) Model : A1720-3 (g) Class : 1.0 (h) IL : 36/70/170 KVp (i) V.F : 1.2 Cont & 1.9 for 8 hrs (j) Freq : 50 Hz (k) Phase : 1 (l) Insulation Class : B (m) Standard : IS : 3156/1992

Supply of 110V DC Closing Coil suitable for 630A, 33KV Vacuum Circuit Breaker of Kirloskar Electric Company Ltd make & Type VRK 36-3

Supply of 110V DC Tripping Coil suitable for 630A, 33KV Vacuum Circuit Breaker of Kirloskar Electric Company Ltd make & Type VRK 36-3

Supply of Push Button Assembly (Set of ON & OFF Push Buttons) suitable for 630A, 33KV Vacuum Circuit Breaker of Kirloskar Electric Company Ltd make & Type VRK 36-3

Supply of 230V AC Spring Charging Motor suitable for 630A, 33KV Vacuum Circuit Breaker of Kirloskar Electric Company Ltd make & Type VRK 36-3

Supply of Cast resin moulded Dual core Current Transformer (Make : KAPPA ELECTRICALS) suitable for 11KV HT VCB Panel of Kirloskar Electric Company Ltd make & Type : A12650 VCB and operation on 11 KV, 3 Phase, 50Hz A.C. supply of following specifications (Set of 3 nos) (a) Core 1 : Metering, IS1-IS2 : 100/1 A, 15VA / 1 (b) Core2 : Protection, 2S1-2S2 : 100/1 A, 15VA/5P10 (c) Type ref : CW 370 (d) HSV : 12 KV (e) ILV : 28/75 KV (f) STR : 25 kA for 1 sec (g) Freq : 50 Hz (h) Standard : IS : 2705/1992

Supply of Cast resin moulded Potential Transformer (Make : KAPPA ELECTRICALS) suitable for 11KV HT VCB Panel of Kirloskar Electric Company Ltd make & Type : A12650 VCB and operation on 11 KV, 3 Phase, 50Hz A.C. supply of following specifications (Set of 3 nos) (a) Type : VEC-213-07 (b) Ratio : 11kV/RT3/110V/RT3 (c) HSV : 12 KV (d) Burden : 100 VA (e) Class : 1.0 (f) ILV : 28/75 KV (g) V.F : 1.2 Cont & 1.5 for 30 sec (h) Freq : 50 Hz (i) Phase : 1 (j) Standard : IS : 3156/1992

Supply of 110V DC Closing Coil for 1250A, 11KV Vacuum Circuit Breaker of Kirloskar Electric Company Ltd make & Type C-500

Supply of 24V DC Closing Coil for 630A, 11KV Vacuum Circuit Breaker of Kirloskar Electric Company Ltd make & Type C-500

Supply of 110V DC Tripping Coil for 1250A, 11KV Vacuum Circuit Breaker of Kirloskar Electric Company Ltd make & Type C-500

Supply of 24V DC Tripping Coil for 630A, 11KV Vacuum Circuit Breaker of Kirloskar Electric Company Ltd make & Type C-500

Supply of Push Button Assembly (Set of ON & OFF Push Buttons) for 1250A, 11KV Vacuum Circuit Breaker of Kirloskar Electric Company Ltd make & Type C-500

Supply of 230V AC Spring Charging Motor for 1250A, 11KV Vacuum Circuit Breaker of Kirloskar Electric Company Ltd make & Type C-500

Supply of 2 Amps, 80KA HRC Fuse Link of offset staggered fixing method, HG type suitable to operate on 415 volts, 50 Hz, AC supply etc., complete as required (Make : L & T, Cat No. ST30725 or or its equivalent from list of approved makes)

Supply of Numerical Overcurrent protection relay with 3 O/C and 1 E/F consisting of Input Module, Power Supply and Output Relay module, Measuring Module and Front Fascia (Make : Easun Reyrolle, Model no-MIT 114)

e) Trip-Neutral-Close switch (Make : Kaycee, Product code : BCD01P006K154 or its equivalent as per list of approved makes)

Supply of panel mounting flush head spring return boot push buttons actuator with NO/NC contact blocks suitable to operate on 230V, 50Hz, AC supply as required.

b) Green

c) Black

d) Yellow

Supplying of following rating Industrial type plugs and socket outlet in sheet steel enclosure with suitable MCB cutout and suitable for universable mounting

a) 20A, 230V, 2P + E pin plug & socket

b) 30A, 440V, 3P + E Pin plug & socket

Supply of following rating Industrial type Plugs suitable for connections to Industrial type metal clad socket.

a) 20A, 230V, 2P + E pin plug

b) 30A, 440V, 3P + E pin plug

Supply of HT HRC fuse of 3.15 Amps rating suitable for HT Potential Transformers of following voltage ratings

SHARMA TRADE AGENCY

Bafna Electric Corp

DEEPAKELECTRICALS