Special Repairs to Bldg No P-65 Family ward at MH under GE (N) Ahmednagar

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) etc complete all as specified and directred by Engineer-in-Charge

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directred by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises etc complete all as specified and directred by Engineer-in-Charge

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick, area of tile exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 15 mm thick screed bedding in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed with white or shade of tiles coloured cement to match the shade of tiles etc complete all as specified and directred by Engineer-in-Charge

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick, area of tile exc 0.18 Sqm but not exc 0.38 Sqm on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineeer-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm in floor over and including 15 mm thick screed bedding in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles of size 350 X 250 X 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Vitrified ceramic tiles double charge/ultra charge ,10 mm thick (square / rectangular) of size 600 x 600 mm of any shade as approved by GE in floor etc laid over and including roughning existing surface , making good the damaged surface, levelling, and fixing with cement based tile adhesive ( Make FOSROC, DR FIXIT) as per the manufecturer's instructions and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 8 (here-in-before) but on skirting over and including 10 mm thick in screed in cement and sand mortar (1:4)

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directred by Engineer-in-Charge

M&L for rendering, 15 mm thick on Brick/stone masonry surfaces in cement and sand mortar (1:6) on wall finished even and smooth without using extra cement with sagol finish etc complete all as specified and directred by Engineer-in-Charge

M&L for two coats of oil bound distemper on newly plastered surfaces of walls paint over 3mm thick wall care putty including preparation of surfaces etc complete all as specified and directred by Engineer-in-Charge

M&L for complete removal of existing treatment and two coats of OBD over and includinf 2mm 3 mm thick wall care putty on plastered surfaces of walls including preparation of surfaces etc complete all as specified and directred by Engineer-in-Charge

M&L for 3 coats of white wash on newly plastered surfaces including preparation on wall etc complete all as specified and directred by Engineer-in-Charge

M&L for preparation of old decorated surafces of ceiling and applying one coat of white wash etc complete all as specified and directred by Engineer-in-Charge

M&L for rendering, 10 mm thick on concrete surfaces in cement and sand mortar (1:4) on ceiling surface finished even and smooth without using extra cement with sagol finish etc complete all as specified and directred by Engineer-in-Charge

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in sub base etc complete all as specified and directred by Engineer-in-Charge

Dismantling ceiling boards or insulation boards any thickness including cover fillets etc complete all as specified and directred by Engineer-in-Charge

Material and labour for false ceiling with 10 mm thick plain non asbestos building 'E' board with decorative finish water proofed on one side fixed on and including powder coated GI fabricated grid of 60 cm X 60 cm made out of main runner of 'T' section of size 32 mm X 24 mm X 0.30 mm, cross runner made out of 'T' of section of size 24 mm X 24 mm X 0.30 mm and alround angular section of size 22 mm X 22 mm X 0.70 mm with GI clip and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600 mm centre to centre as per manufacturere's instructions and etc complete all as specified and directed by Engineer-in-Charge

Taking down steel windows / ventilators, of any description and size each etc complete all as specified and directred by Engineer-in-Charge

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directred by Engineer-in-Charge NOTE: Wire cloth, glass, guard bars and painting shall be measured and paid separately.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, etc complete all as specified and directred by Engineer-in-Charge NOTE: Wire cloth, glass, guard bars and painting shall be measured and paid separately.

S&F powder coated anodised aluminium frame for windows ventilator with more rebates incl joining cleats for fixing Etc, etc complete all as specified and directred by Engineer-in-Charge

S&F powder coated anodised aluminium windows ventilator shutter, fixed type without sashbar alu section wt 0.55 Kg/m incl. necessary joining cleats glazing clips, rubber packing anodired aluminium, snap beading, screas etc complete all as specified and directred by Engineer-in-Charge

S&F 4.0mm thick sheet glass ordinary quality & glazing with solar control filim 50 micron thick reflective type sticked to glass panes as per instruction of manufacturers exc 0.50 sqm in each pane etc complete all as specified and directred by Engineer-in-Charge

S&F anodised alumunium door shutters alumunium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised alumunium snap beading screws etc complete all as specified and directred by Engineer-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc complete all as specified and directred by Engineer-in-Charge

M&L for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directred by Engineer-in-Charge

M&L for glazing with 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane etc complete all as specified and directred by Engineer-in-Charge

Taking down chowkhats or frames n exc 1.5 sq. m each with shutters (without taking off shutters from the frame) etc complete all as specified and directred by Engineer-in-Charge

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each etc complete all as specified and directred by Engineer-in-Charge

Refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each etc complete all as specified and directred by Engineer-in-Charge (Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.)

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directred by Engineer-in-Charge

S&F stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and directred by Engineer-in-Charge

All as per item No 34 (here-in-before) but fixed in repairs.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and directred by Engineer-in-Charge

S&F factory made solid PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails frame shall be covered with heat moulded plain coloured PVC `C' channel having a PVC sheet strip of 20 mm width stuck and plain colour PVC sheets for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame etc complete all as specified and directred by Engineer-in-Charge

S&F 100 mm long butt hinge, medium weight, Stainless steel etc complete all as specified and directred by Engineer-in-Charge

S&F 125 mm long butt hinge, medium weight, cold rolled mild steel etc complete all as specified and directred by Engineer-in-Charge

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directred by Engineer-in-Charge

S&F 200 mm long aluminium anodised barrel tower bolt, of extruded sections etc complete all as specified and directred by Engineer-in-Charge

S&F 150 mm long aluminium anodised handle, cast type etc complete all as specified and directred by Engineer-in-Charge

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring etc complete all as specified and directred by Engineer-in-Charge

M&L for preparation of old painted steel surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint etc complete all as specified and directred by Engineer-in-Charge

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer etc complete all as specified and directred by Engineer-in-Charge

M&L for preparation of old painted wooden surface of any description not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint etc complete all as specified and directred by Engineer-in-Charge

supply and fix mild Steel 32 mm dia decorative powder coated curtain rods with fixing brackets fixed in repairs etc complete all as specified and directred by Engineer-in-Charge

S&F in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge by Engineer-in-Charge. Makes : Petite series Cat Part No CO287 (S) / 88 (P) incl seat cover Cat Part No E8309 of Parryware or equivalent make as mentioned in list of make in Appendix `C'

S&F in repairs health faucet (ABS Body) with 1 meter long easy flex tube in chrome finish & wall hook etc complete all as specified and directed by Engineer-in-Charge Make : Cat Part No ALD-CHR-585 of Jaquare or equivalent makes as mentioned in list of make in Appendix `C'

Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe etc complete all as specified and directred by Engineer-in-Charge

All as per item No 50 (here-in-before) but 20mm dia pipe.

S & F for CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on wall/ceiling or laying in floors com 16 mm bore outer dia of pipe etc complete all as specified and directred by Engineer-in-Charge

All as per item No 52 (here-in-before) but 20mm dia pipe.

S&F PVC (SWR) floor trap, 75 mm dia with grating including jointing with solvent cement etc complete all as specified and directred by Engineer-in-Charge

S&F in repair chromium plated grating 100mm dia etc complete all as specified and directred by Engineer-in-Charge

S&F in repair, bib tap 15 mm dia, fancy type chromium plated, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and directred by Engineer-in-Charge

S&F in repair, 15 mm dia stop valve, fany type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe etc complete all as specified and directred by Engineer-in-Charge

Supply and fix in repairs, shower rose with shower arm from Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) from MARC or equivalent makes mentioned in Appendix `C' in list of makes.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directred by Engineer-in-Charge

S&F in repairs decorative towel ring recangular chromium plated fixed with (CP) brass screws of approved qualityas specified Make : Cat Part No EG-7010 of Plumber or equivalent in Marc / ESS-ESS

Supply and fixing in repairs tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No U-0911 of Marc or equivalent makes as mentioned in list of make in Appendix `C'

Supply and fix in repairs looking mirror of size 600 mm X450 mm etc compete all as specified and directed by Engineer-in-Charge. Make:- Cat part No C 8606 of Parryware or equivalent in Modi / Atul / Saint Gobin

M&L for PVC mirror cabinet of size 16" X 16" with napkin rail in ivory colour etc compete all as specified and directed by Engineer-in-Charge.

S&F in repairs 32 mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directred by Engineer-in-Charge

Supply and fix PVC valveless, syphonic action type, flushing cistern,low level, all accesories etc complete all as specified and directed by Enginee-in-Charge

Supply and fix in repairs wash hand basin vitreous China white, flat back type of size 550 X 400 mm pedastal type including pedastal, pillar tap, CP waste chain and plug and porcelain stopper, waste pipe, a pair of brackets,or errecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge Make :- Cat Part No 10098 of Hindware or equivalent to makes in makes list in Appendix `C'

S&F in repair Brass Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality. Make : Cat Part No ER0916 of Plumber or equivalent in Marc / ESS-ESS

Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.Make:- Cat part No MOR 1010(Orintal series) of MARC or equivalent makes mentioned in list of makes in Appendix `C'

S&F 125mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and directred by Engineer-in-Charge

S&F 125 mm long aluminium anodised handle, cast type etc complete all as specified and directred by Engineer-in-Charge

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors, etc complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn in and incl PVC Casing and capping ISI Marked with its accessories with provn of CI/pressed steel terminal switch box and white bakelite plastic laminated top sheet cover and fixed with brass screws cup washer for fixing witches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following, etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, bulkhead lights, bldg security light etc

One light point controlled by one piano type switch 5 Amps single pole one way

One fan point controlled by one piano type switch 5 Amps single pole one way

One bell point controlled by one push type switch 5 Amps single pole one way

One 3 pin 5 Amps socket outlet on same board controlled by one No piano type switch 5 Amps single pole one way

One 3 pin 5 Amps socket outlet on independent board controlled by one piano type switch 5 Amps single pole one way

All as per Item No 73 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket outlet on independent board

S&F switch piano flush type single pole, one way 5/6 Amps etc complete all as specified and directed by Engineer-in-Charge

S&F Switch socket combination 2 in 1, 5 Amp flush type 230V AC etc complete all as specified and directed by Engineer-in-Charge

S&F Switch socket combination 5 in 1, 5/16 Amps flush type 230V AC etc complete all as specified and directed by Engineer-in-Charge

S&F bell push flush type single pole one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F bell ding dong elelctric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement double door Sheet metal enclosures factory made DBs 4 way, (TPN DB's) 415 volts protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 200 Amps rated copper Busbar, With Neutral bar, Earthbar and Cable lies for Cable management, Fully shrouded, Neutral bars, Prefitted masking sheet etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement double door Sheet metal enclosures factory made DBs 8 way, (SPN DB's) 240 volts protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 200 Amps rated copper Busbar, With Neutral bar, Earthbar and Cable lies for Cable management, Fully shrouded, Neutral bars, Prefitted masking sheet etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement double door Sheet metal enclosures factory made DBs 4 way, (SPN DB's) 240 volts protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 200 Amps rated copper Busbar, With Neutral bar, Earthbar and Cable lies for Cable management, Fully shrouded, Neutral bars, Prefitted masking sheet etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCB , SP, AC, 240 volts of 06 to 40 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCB, TPN, AC, 415 volts of 63 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCB, SPN, AC, 240 volts of 40 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCB, SPN, AC, 240 volts of 63 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge

S & F Lumeno LED Bulb 10 Watt (cool day light) having colour temp 6500 K and lumen output 950 suitable for "B-22 type to fix on batten holder and wall light etc complete all as specified and directed by Engineer-in-Charge

M&L for recessed mounting mirror optic luminaries suitable for 2x 36 watts FP-L (HF) including 2 nos 36 watt FP-L tube incl connecting up and taking out old U/S ceiling mounted fittings etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 6 Sqmm with 6 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through in and incl PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) Note: Two run of 6 sq.mm cable i.e for one run for phase, one run for neutal with one run of 6 sq.mm cable for earth and one run of PVC Casing & caping shall be measured as one unit

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25mtr depth and top edge of the earth plate not less than 1.5mtr below normal ground level connected to galvanised earth lead wire 4.0Sqmm dia by means of nuts,bolts & washer etc. Earth wire connected upto main earth point/DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 ( using 20 mm graded stone agregate) and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of ms bar @ 15 mm CIC with both way lifting arrangement complete including all necessary excavation & earth work etc complete all as specified and directed by Engineer-in-Charge

Supply and laying or fixing or passing in trenches/ on pole / through pipes, 1100 volts grade XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor of cross sectional area 35 sq mm 3.5 core including connection with cable glands & lugs etc and testing on completion etc complete all as specified and directed by Engineer-in-Charge

Supply and laying or fixing or passing in trenches/ on pole / through pipes, 1100 volts grade XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor of cross sectional area 70 sq mm 3.5 core including connection with cable glands & lugs etc and testing on completion complete all as specified and directed.

S/F in repair metal clad AC box with one no. 20A MCB & one no. blanking plate etc complete all as specified and directed by Engineer-in-Charge

S/F plastic body fresh air fan/ventilator with louver 250 mm sweep etc complete all as specified and directed by Engineer-in-Charge

S/F wall mounted cabin fan, 400 mm sweep having cord controlled swing & 3/4steps speed speed Make Havells Swing Premia Gold etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 27 747.00 shall be deducted from BOQ on account of schedule of credit

M/s AG PATHAN

M/s. Sagar Traders

M/s. A P INFRA

MS. N.R. PENTA AND SONS