Providing new parking shade and renovations to washbasin of Directorate of Art and Culture Sanskruti Bhavan, Patto, Panaji-Goa.

Steel work in built up tubular (round square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL TATA. VIZAG JSW APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete.

Providing corrugated G.I. sheet roofing fixed with galvanized iron j or 1 hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins rafter and trusses.;0.63 mm thick sheet - 24 G

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 including cutting of stone and making good the walls wherever required : Kitchen sink with drain board with coupling & all accessories complete with choke stop strainer Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete;Overall size 1040mmx510mm (41"x20"") bowl size 460mmx410mmx200mm (18""x 16""x 8"") depth 200 mm. Glossy. 1.0mm thk"

Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993;15mm nominal bore

Providing and fixing ASTM UPVC pipe conforming to ASTM 2467 with ISO 14001 including all UPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall.;SCH-40(blue)/(white);20mm outer dia.

Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993;15mm nominal bore

Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps skirting dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete;Jet black

Cuddappah stone slab machine cut flooring over 20mm (average) thickness of cement mortar 1:4 (1 cement : 4 coarse sand laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete - 25 mm thick.

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastner of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2) counter sunk head comprising of 10 m dia polyamide PA6 grade sleeve including drilling of hole in frame concrete/ masonry etc. as per direction of Engineer.;10 x 60 mm.

Half brick masonry in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 75 kg/ sq. cm upto floor five level .;In foundation and plinth.;Upto floor V level.

Please Enable Macros to View BoQ information