Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
Tender Value
₹27.8 L
Closing Date
12 Nov 2021, 3:00 pmClosed
SR Padam SO g
Electrical Section PRPD Kalpakkam Ph No 044 27480262
Fabrication of Components winding works assembly and overhauling of motors at PRPD Site Kalpakkam
2021_BARC_655257_1
PRPD/MS/755/MW/K-2584/2021
Open Tender
Electrical Works
Item Rate
180 days
Kalpakkam
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
Exempted
30 Nov 2021
30 Oct 2021
15 Nov 2021
1 Nov 2021
12 Nov 2021
2 Nov 2021
1 Nov 2021 - 10 Nov 2021
Amount
Fabrication and assembly of various components as detailed in technical specifications for 15kW 3000 RPM Permanent Magnet Synchronous Motor. The works shall be carried out as per department fabrication drawings and as directed by Engineer-incharge. All the material required for the completion of the work shall be in the scope of the contractor.
Both way transportation of 50 kW Motor-Generator Set to work shop with transit risk insurance against item cost of 25Lakhs and testing works including dynamic balancing of rotor before final assembly as detailed in technical specifications and as directed by Engineer-incharge.
Modification works for providing insulation sleeve over the bearing housing to arrest shaft currents for a 50 kW Motor-Generator Set as detailed in technical specifications. The works shall include fabrication of new rotor shaft and related rotor components assembling/disassembling, fabrication of new grease cups, bearing collars, installation of new set of sealed bearings. All the material required for the completion of the work shall be in the scope of the contractor.
Removal of existing winding, preparation of winding diagram, rewinding of AC motor stator for 50 kW Motor-Generator Set including conditioning works as detailed in technical specifications and as directed by Engineer-incharge. All the material required for the completion of the work shall be in the scope of the contractor.
Removal of existing winding, rebarring of AC motor rotor caged winding for 50 kW Motor-Generator Set including conditioning works as as detailed in technical specifications and as directed by Engineer-incharge. All the material required for the completion of the work shall be in the scope of the contractor.
Removal of existing winding, preparation of winding diagram, rewinding of AC alternator stator for 50 kW Motor-Generator Set including conditioning works as as detailed in technical specifications and as directed by Engineer-incharge. All the material required for the completion of the work shall be in the scope of the contractor.
Removal of existing winding, preparation of winding diagram, rewinding of AC alternator rotor poles for 50 kW Motor-Generator Set including conditioning works as detailed in technical specifications and as directed by Engineer-incharge. All the material required for the completion of the work shall be in the scope of the contractor.
Removal of existing winding, preparation of winding diagram, rewinding of exciter stator and rotor windings for 50 kW Motor-Generator Set including conditioning works as as detailed in technical specifications and as directed by Engineer-incharge. All the material required for the completion of the work shall be in the scope of the contractor.
Both way transportation of 15 kW 3000 RPM 220V DC Shunt Motor to manufacturer's facility with transit risk insurance against item cost of 10Lakhs, testing and overhauling works including dynamic balancing of rotor before final assembly, supply and replacement of both bearings with new set as detailed in technical specifications and as directed by Engineer-incharge.
Removal of existing winding, preparation of winding diagram, rewinding of Armature for 15 kW 3000 RPM 220V DC Shunt Motor including conditioning works as detailed in technical specifications and as directed by Engineer-incharge. All the material required for the completion of the work shall be in the scope of the contractor.
Commutator rebuilding and conditioning with new mica segments for 15 kW 3000 RPM 220V DC Shunt Motor. All the material required for the completion of the work shall be in the scope of the contractor.
Removal of existing winding and rewinding of field windings for 15 kW 3000 RPM 220V DC Shunt Motor including conditioning works as detailed in technical specifications and as directed by Engineer-incharge. All the material required for the completion of the work shall be in the scope of the contractor.
Fabrication of new shaft for 15 kW 3000 RPM 220V DC Shunt Motor as per the dimensions collected and based on department guidance drawings as detailed in technical specifications. All the material required for the completion of the work shall be in the scope of the contractor.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .