Special Repairs to internal wiring and High bay fitments in maintenance section in C Bldg and Shed No 3 of Trial and Review Section at 512 Army Base Workshop Under GE C Kirkee.

Amount

Taking down carefully existing unserviceable aluminum / copper point wiring of any description & in any position with and including existing steel conduit / PVC Conduit / Casing capping fixed on surface/wall/angle/girder and including all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, sockets, etc. including sunken boxes/junction boxes and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces including cost of materials complete all as specified and directed.

M&L for point wiring in PVC non metallic conduit of suitable size not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles etc. on surface with and including two runs of PVC insulated unsheathed multi stranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) PVC insulated unsheathed multi stranded (FRLSH) copper conductor cable conforming to IS specification as earth wire to be terminated in and incl. suitable size sunken type MS sheet steel 1.6 mm thick terminal box of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same with matching to existing wall including material complete all as specified and directed.

All as per Srl item No 2 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. Size.

All as per Srl item No 2 above but point wiring for 5 pin socket outlet, 5 Amps on same board with other switches complete all as specified and directed.

All as per Srl item No 2 above but point wiring for 5 pin switch socket outlet combination, 5 Amps on independent board complete all as specified and directed.

All as per Srl item No 2 above but point wiring for one five pin switch socket outlet combination, 15 Amps & 5 Amp on independent board using 2.5 sqmm two run and one run 2.5 sqmm (nominal area) copper conductor cable complete all as specified and directed.

Material and labour for point wiring for one light point or one fan point controlled by one switch in and including stove enamelled steel conduit with and including all steel enamelled fittings such as elbow bends, junction boxes, supporting clamps for proper hanging arrangements made out from 20x1mm flat aluminium Patti including nuts, bolts and bending to shape etc. of appropriate size but not less than 20mm on surface with two run of PVC insulated unsheathed multi stranded copper conductor cable (FRLSH) 1.5 Sqmm nominal cross sectional area 1100 volts grade and including one run of 1.5 sqmm (green colour) PVC insulated unsheathed multi stranded (FRLSH) copper conductor cable as earth wire conforming to IS specification including suitable size sunken type MS sheet steel 1.6 mm thick terminal box of suitable size for mounting switches, sockets etc. and wiring to be terminated in pressed steel sunken boxes with 3 mm thick plastic laminated sheet cover with and including all accessories and making good the disturbed wall and painting the same with matching colour of the existing wall, including material complete all as specified and directed.

All as per Srl item No 7 above but point wiring for 5 pin socket outlet, 5 Amps on same board with other switches complete all as specified and directed.

All as per Srl item No 7 above but point wiring for 5 pin socket outlet, 5 Amps on independent board complete all as specified and directed.

All a s per Srl item No 7 above but point wiring for one five pin switch socket outlet combination, 15 Amps & 5 Amp (independent) with using 2.5 sqmm two run and one run 2.5 sqmm (nominal area) copper conductor as earth wire complete all as specified and directed.

Supplying & fixing switch flush type, 5 Amps, single pole, one way , 230 volts AC circuit complete all as specified and directed.

Supplying & fixing switch flush type, 5 Amps, Bell push, 230 volts AC circuit complete complete all as specified and directed.

Supplying & fixing socket outlet, five pin, 5 Amps, flush type, multipurpose, 230 volts AC circuit complete all as specified & directed

Supplying & fixing switch flush type, 15 Amps, single pole, one way , 230 volts AC circuit complete all as specified and directed.

Supplying & fixing Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type, 230 volts AC circuit complete all as specified and directed.

Supplying & fixing Ding Dong call bell AC 230 Volts single pole to be fixed on surface complete all as specified and directed.

Supplying & fixing ceiling rose PVC/polycarbonate, isolated body, three terminals complete all as specified and directed.

Supply and fixing in repairs Lamp Holder PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

Supply and fixing in repairs stepped type electronic fan regulator flush type suitable for ceiling fans, prewired 230 volts AC 50Hz supply, 100Watt complete all as specified and directed.

Supply, fixing, connecting and testing in repairs Industrial Earth Plug & socket with sheet metal enclosure electric driven single phase including MCB 'C' series SP 20 Amps and supplied with neutral links complete all as specified and directed.

Supply, fixing, connecting and testing in repairs Industrial Earth Plug & socket with sheet metal enclosure electric driven three phase including MCB 'C' series TP 20 Amps and supplied with neutral links complete all as specified and directed.

Dismantling and Taking out old unserviceable copper/aluminium sub main wiring/Unarmored cable (used as Sub main wiring) from any height of any Size and Core with all connecting accessories including conduit or casing capping and including making good to the disturbed wall and painting with same matching paint as of existing wall including materials complete all as specified and directed.

Material & Labour for Sub main wiring at any height with 2 single core PVC insulated, multi stranded copper conductor cable (FRLSH), unsheathed, 2.5 sqmm, 1100 volt grade drawn through and including New suitable size steel conduit and including one single core PVC insulated multi stranded unsheathed copper conductor cable, 2.5 sqmm, FRLSH type in green colour as continuous earth wire including all accessories and fixing arrangements, supporting clamps, bends, sockets and connecting items etc. complete all as specified and directed. Note - (a). Two runs of 2.5 Sqmm wiring cable and one run of 2.5 sqmm earth continuity wire with steel conduit shall be measured as one length.

Material and labour for Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, FRLSH type, 2.5 Sqmm, 1100 volts grade, drawn through and including New PVC non metallic conduit including connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type, 2.5 sqmm, 1100 Volts grade, as earth continuity wire complete all as specified and directed. (Note:- (i) Two runs of cables & continuous earth wire in new PVC PVC non metallic conduit will be measured as one length of sub main wiring).

Material and labour for Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, FRLSH type, 4.0 Sqmm, 1100 volts grade, drawn through and including New non metallic PVC conduit including connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type, 4.0 sqmm, 1100 Volts grade, as earth continuity wire complete all as specified and directed. (Note:- (i) Two runs of cables & continuous earth wire in new conduit will be measured as one length of sub main wiring).

Dismantling and drawing out old unserviceable Sub Main Aluminium/copper wiring from Existing Steel/PVC Conduit of any size and any type from any height with all connecting accessories’ (excluding conduit or casing capping) and making good the disturbed wall and painting with the same finish to match with existing wall finish including neceeary materials complete all as specified and directed.

Material and labour Sub main wiring at any height including using two single core PVC insulated copper conductor cable (FRLSH) of size 1.5 sqmm 1100 volt grade drawn through existing Steel/ PVC conduit including 1.5 sqmm. PVC multi stranded copper conductor cable (FRLSH) in green colour for continuous earthing complete all as specified and directed. Note - Two runs of 1.5 Sqmm cable and one run of earth continuity wire of 1.5 Sqmm shall be measured as one length.

Material and labour Sub main wiring at any height including using two single core PVC insulated copper conductor cable (FRLSH) of size 2.5 sqmm 1100 volt grade drawn through existing Steel/ PVC conduit including 2.5 sqmm. PVC multi stranded copper conductor cable (FRLSH) in green colour for continuous earthing all as specified and directed. Note - Two runs of 2.5 Sqmm cable and one run of earth continuity wire 2.5 Sqmm shall be measured as one length.

Material and Labour for Sub main wiring at any height with four single core PVC insulated copper conductor cable (FRLSH) of size 6 sqmm 1100 volt grade drawn through Existing Steel / PVC conduit including two single core 6.0 sqmm PVC multi stranded copper conductor cable (FRLSH) in green colour for continuous earthing complete all as specified and directed. Note - Four runs of 6 Sqmm wiring cable and two runs of earth continuity wire 6 Sqmm shall be measured as one length.

Disconnecting and taking down old existing damaged metallic rigid steel conduit of any size and any type from any height with all fittings complete all as specified and directed.

Supply & fixing hot galvanized rigid steel conduit 25 mm dia, light grade, at any height with and inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, screws, clips, plugs, clamps etc. for securing cables, battens, conduits etc. to walls, steel joists etc. complete to be fixed on wall/ceiling/MS angles complete all as specified and directed. Make - Jindal/Kalinga/ BEC as approved by GE.

Supply & fixing hot galvanized rigid steel conduit 20 mm dia, light grade, at any height with and inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, screws, clips, plugs, clamps etc. for securing cables, battens, conduits etc. to walls, steel joists etc. complete to be fixed on wall/ceiling/MS angles complete all as specified and directed. Make - Jindal/Kalinga/ BEC as approved by GE.

M & L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, at any height, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint for mounting Air Circulator / Exhaust Fan / Ceiling Fan/high bay fittings etc for fixing arrangements complete all as specified and directed.

Dismantling and Taking down unserviceable existing light fittings 1X 40 Watt / 2X 40 Watt /flame proof fittings of any size and capacity from any location/height after disconnecting electrical connection complete including all connected accessories complete all as specified and directed.

Supply & fix LED tube light extruded Aluminium batten along with fixture, 20 W complete all as specified and directed. Make Bajaj Cat No BLTRU 20W NW VIVA or equivalent in CG/Wipro/Philips as approved by GE.

Supply & fix LED tube light extruded Aluminium batten along with fixture, 40 W Make:- Bajaj Cat No BLTRU 40W NW VIVA or equivalent in CG/Wipro/Philips as approved by GE.

Supply and fix Flame proof - weather proof flood light fitting 60 watt LED with die cast aluminium having heat resistance toughened glass IP 65 protection complete all as specified and directed. Make:- CG Cat No FWL1315-60CDL/HB or equivalent in Wipro/Philips as approved by GE.

Supply, fixing, connecting & testing sheet metal enclosures, double door, for SPN DBs suitable for single pole and neutral, 12 way, 240 volts IP 43 protection, with steel door having copper bus bars suitable for 200 Amps rating including taking down old DBs and making good the surface complete all as specified and directed. Make Legrand Cat No 5076 12 or equivalent in L&T /ABB/CG as approved by GE.

Supply, fixing, connecting & testing sheet metal enclosures, double door, for SPN DBs suitable for single pole and neutral, 8 way, 240 volts IP 43 protection, with steel door having copper bus bars suitable for 200 Amps rating including taking down old DBs and making good the surface complete all as specified and directed. Make: Legrand Cat No 5076 11 or equivalent in L&T /ABB/CG as approved by GE.

Supply, fixing, connecting & testing sheet metal enclosures, double door, VTPN MCCB DBs 6 way suitable for MCCB as incomer, 415 volts IP 43 protection ,including MCCB 160A 36 KA, with steel door having copper bus bars suitable for 100 Amps rating per phase and separate neutral, door earthing including taking down old DBs and making good the surface complete all as specified and directed. Make: Legrand Cat part No 507751and MCCB Cat No 420097 or equivalent in L&T /ABB/CG as approved by GE.

S&F MCB single pole 6 to 32 Amps, 240 volts, 10 kA breaking capacity, 'C' curve complete all as specified and directed. Make: Legrand Cat No 4085 87-95 or equivalent in L&T /ABB as approved by GE.

S&F MCB Single pole & neutral 6 to 32 Amps, 240 volts, 10 kA breaking capacity, 'C' curve complete all as specified and directed. Make: Legrand Cat No 4086 09-17or equivalent in L&T /ABB as approved by GE.

S&F MCB Single pole & neutral 40 to 63 Amps, 240 volts, 10 kA breaking capacity, 'C' curve complete all as specified and directed. Make: Legrand Cat No 4086 18-20 or equivalent in L&T /ABB as approved by GE.

S&F MCB three pole 6 to 32 Amps, 415 volts, 10 kA breaking capacity, 'C' curve complete all as specified and directed. Make: Legrand Cat No 4086 50-58or equivalent in L&T /ABB as approved by GE.

S&F MCB three pole 40 to 63 Amps, 415volts, 10 kA breaking capacity, 'C' curve Make: Legrand Cat No 4086 59-61 or equivalent in L&T /ABB as approved by GE.

S&F MCCB 4 pole 63 Amps 25 KA Thermal magnetic release complete all as specified and directed. Make: Legrand Cat No 4200 53 or equivalent in L&T /ABB as approved by GE.

S&F in replacement suspended type High Bay LED fitting Duranto Series of Bajaj or equvelant complete with all accessories having IP 65 degree of protection, High power factor ,pressure die cast aluminium housing adopts best heat dissipation 150 watt including connection with suitable size new copper cable from connector to fitting including taking down old unserviceable fittings of any size from approx. 15 M height at any location complete all as specified and directed. Make- Bajaj Cat Part No. BGHB 150W LED (Duranto LED High Bay Lumanries) or Equivalent in Philips / Wipro/Crompton Greaves/OSRAM as approved by GE. Note :- (i) High Bay Light is to be fixed at various heights in various Shed of 512 ABWS. (ii) The quoted rate includes the cost of MS clamps and necessary fixing work and any material required for fixing of High bay lights.

S&F cable PVC insulated and PVC sheathed copper conductor multi stranded 2.5 sqmm 3 core to be fixed on/in wall/steel struts / pipe etc. for flame proof light fittings complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 60×60cm×6mm thick electrode buried directly in ground (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connected with 32x6mm GI strip as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exceeding 50m, with and including PCC chamber in PCC (1:2:4), type B1, using 20 mm graded stone aggregate, mild steel frame made out of angle iron of size 40mm x 40mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade GI pipe for watering, 40 mm dia light grade Gl pipe for lead protection in and including alternate layer of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-I (2009) including testing on complete all as specified and directed. NOTE : - (i). Earthing strip GI/copper upto 7.5m will be measured and paid under this item only. (ii). The earth chamber shall be constructed 50 cm away from the edge of earth pit and the cost of the same is deemed to be included in rate quoted for above item. Note (a). Necessary safety measures are to be taken while carrying out repair works as the some works are to be carried out at up to 12 to 15 mtr height in this contract. (b) Proper Scaffolding arrangement/ladder(s) is to be used whereever required in the preceeding items and the rate of the same is deemed to be included in the quoted rates. (c) Any damage/loss to govt. property will be made good by the contractor at his own cost. (d) Labour employed shall be given all safety equipment’s like safety belts and connected items during execution of the work whereever required and as directed by Engineer In Charge.

M/S. Niksun Electro-Infra Private Limited

T.H.ASSOCIATES

VELOX ELECTRO-MECHANICAL TRADERS AND CONTRACTORS

metro electrical services