Laying of HDPE pipeline at project STP RCF Jalal Bhulana and Repair of Pipeline Motors and Control Panel of STP Kapurthala

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

Tender No: DSWC/JAL/2026-2027/07

Name of the Firm/Bidder

Address of Firm/Bidder

Mobile No of Firm/Bidder Email ID of Firm

Name of work: 1. PROVIDING AND LAYING OF HIGH-DENSITY POLYETHYLENE (HDPE) PIPELINE (DIAMETER 200 MM, PE-80, 4 Kg/cm2 WORKING PRESSURE AS PER 4984-1995 STANDARDS); INCLUDING ALL ALLIED WORKS WITH MATERIAL AS PER DNIT FROM SEWERAGE TREATMENT PLANT, RCF (JALAL BHULANA), KAPURTHALA FOR SUPPLY OF TREATED WATER FOR IRRIGATION. 2. Civil Work & Repair Work of Pipeline & Motors of STP Kapurthala at Distt Kapurthala.

Total Estimated Amount of Works Rs. Twenty Nine Lakh Ninety One Thousand Nine Hundered Forty Only.

Quoted by Contractor {- or + to estimated amount, in figure upto 2 dcimal point only} Quote (-/+)

Note: Please quote only figure (upto 2 decimal points) in above blue colour box in minus or plus. Do not put %age sign after this figure. Please check Quoted Rate in Next cell.

Note: Please refer to DNIT for item wise rate and details.

Name of Work 1. :-PROVIDING AND LAYING OF HIGH-DENSITY POLYETHYLENE (HDPE) PIPELINE (DIAMETER 200 MM, PE-80, 4 Kg/cm2 WORKING PRESSURE AS PER 4984-1995 STANDARDS); INCLUDING ALL ALLIED WORKS WITH MATERIAL AS PER DNIT FROM SEWERAGE TREATMENT PLANT, RCF (Jalal Bhulana), DISTRICT: KAPURTHALA FOR SUPPLY OF TREATED WATER FOR IRRIGATION. .

Item of Work Rate in (Rupees) Total in Rupees

Providing, Laying, Jointing and Excavation of Trenches with back filling of Pipeline system etc. complete in all respects. (As detailed in attached sheet) HDPE 200mm 4Kg/sq cm, PE-80 Forty Seven Thousand Fifty Five Only

Civil Works for Pump Room for Irrigation with treated water (As detailed in attached sheet) One Lac Twelve Thousand One hundred twenty five only

Providing and fixing of Pumping System complete (As detailed in attached sheet) Four Lac Seventy Two Thousand Thirty One Only

Electric Fittings for pump house and pumps (As detailed in attached sheet) Four Lac Sixty Eight Thousand Four Hundred Seventy Only

Sub total Ten Lakh Ninety Nine Thousand Six Hundred Eighty One Only

Digital Water Flow Meter (Lump Sum) 100000 One Lac Only

Auto Cut-off and Auto Start System 25000 Twenty Five Thousand Only

Sign Boards (Lump Sum) 5000 Five Thousand Only

Total 1 Twelve Lakh Twenty Nine Thousand Six Hundred Eighty One only.

Name of Work 2. :-Civil Work & Repair Work of Pipeline & Motors of STP Kapurthala at Distt Kapurthala

Item of Work Rate in (Rupees) Total in Rupees

Pipeline & Civil Work 1343359 Thirteen Lac Forty Three Thousand Three Hundred Fifty Nine Only

Motors & Control Panel Repair 418900 Four Lac Eighteen Thousand Nine Hundred Only

Total 2 Seventeen Lakh Sixty Two Thousand Two Hundred Fifty Nine Only

Grand Total 1+2 Twenty Nine Lakh Ninety One Thousand Nine Hundered Forty Only.

Only one of the options is to be filled. More than one option shall be rejected.

Rate filled in any form shall be considered only in %age

Rate shall be filled both in figures and in words, otherwise tender shall be rejected

Rate filled at any other place in the document shall not be considered.

No condition shall be accepted.

Department of Soil and Water Conservation, Punjab

Project : Underground Pipeline Project for Utilization of Treated Water for Irrigation at STP RCF (JALAL BHULANA), KAPURTHALA (2 MLD)

ABSTRACT SHEET OF MATERIAL FOR PIPELINE SYSTEM

S.No. Item Description Qty Unit Rate Amount (Rs.)

1 Excavation for air release valve installation cum 104.4

2 Supply and installation of alfa-alfa valve (Size 200mm) 12 Each 985

3 Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing, cost of nut bolts and rubber insertion all carriages complete.

a C.I Single air valve (Size 80mm) (For 200mm Dia HDPE Pipe) 7 Each 2515.5

4 Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.

a Supply & Jointing of 50 mm. Dia. G.I. Pipe (3 mtr for each ARV) mtr 721.9

Department of Soil and Water Conservation, Punjab

Project : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT STP RCF (Jalal Bhulana) (2MLD)

Construction of Pump House [4mx4m]

Sr No Description of Items Qty Unit Rate Amount (INR)

1 First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 meter above plinth level (Parapet work) Cum 6116.1

2 Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing. 26.83 Sqm 793.84

3 12.5 mm thick cement plaster 1:5 45.24 Sqm 198.51

4 Preparation of Plastered or Concrete Surface for painting (Including sand papering the surface) using ready mixed cement based wall putty by applying 2 or more coats to get required finish. 45.24 Sqm 84.28

5 Applying Priming Coat with Cement Primer in all Shade on newly plastered or concrete exterior surface. 45.24 Sqm 22.12

6 Finishing Walls with acrylic smooth exterior paint of required shade with 2 or more coats applied @1.67 litre/10Sqm over and including base coat of water proofing cement paint applied @2.20kg/10Sqm 45.24 Sqm 126.42

7 Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm and 100mm sand filling using mechanical mixer for mixing of material 10.16 Sqm 424.56

8 Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. 8.3 Mtr 265.48

9 Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineerin- charge No. 142.22

10 Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 Each 100.08

11 Khurra on roof as per item No. 13.43 with C.I. Spouts 100 mm dia fixed in position. Each 133.79

12 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS code :15658 (2006) 10.16 Sqm 679.51

13 Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect. (a)For single rebate. 26.25 Kg 93.76

14 Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects Sqm 4108.65

15 Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flashwelded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazingand wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items) Kg 134.85

16 Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area Sqm 629.99

17 Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. Sqm 954.47

18 Applying priming coat with metal primer on new steel or iron work including preparation of surface. Sqm 25.28

19 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade Sqm 69.53

(A) SubTotal Amount

Department of Soil and Water Conservation, Punjab

Project : STP RCF (Jalal Bhulana), Kapurthala (2 MLD)

Estimate for Cost of Pumping System Installation

Sr. No. Description of items Unit Qty Rate Amount (INR)

A Pumping set estimated cost:-

1 Providing, fitting & commesioning of ISI Mark Monoblock Non-clog pumpset with Panel Board, Fuse Box, Cable for connection from Pump to Panel within the pump Room for 2 MLD discharge and 14 Meter Head and power of 7.5 HP (as calculated in head loss sheet) (Non- Schduled Item, cost considered as per market rate) (excluding the cost of Panel Board, Fuse Box, Cable ) self propeller motor Set 2 179896

2 Control panel with MS steel sheet fabricated, dust & vermin proof wall mounted, rubber cord lining to prevent dust & moisture, dully painted with required holes for cables in coming and outgoing of suitable capacity with starter Amp. Meter, volt meter for running of Motor pumpset Set 2 34810

3 Supplying and laying C.I. specials suction pipe from sump to pumping units as per IS:1538 complete as desired by Engineer-in-Charge conforming to ISI specifications.. C.I. specials upto 300mm i/d .

b Flange (100mm i/d weighing 17 Kg each) 6 nos. approx kg 82.16

4 Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete € C.I. Single air valve screwed (Size 80mm)

Total for 2 Pumpsets 1x2=2 Nos. Each 2 4507.12

5 Jointing of C.I. Pipes as per IS:1536, Valves and specials with lead caulked joints ,including cost of lead , yarn and cost of labour fuel and tools etc with testing complete. For 100mm i/d pipe lines

Total for 2 Pumpset Each 10 767.31

6 Cutting of C.I. Pipes , specials and chipping or filing the surface to a uniform finish. © 100mm i/d pipelines

Total for 2 Pumpsets Each 10 55.81

7 Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line presure up 15kg/cm2 & including connection with main panel etc. as required complete in all restect

Total for 2 Pumpsets 1x2=2 Nos. Each 2 3799.27

8 Structural steel work in compound girders or Stanchions built up from two or more R.S. joists or channel section or plates & angles etc. including cutting and fixing all lattice bars, stiffeners, gusset plates, bolts, nuts, rivets, welding rod, etc. complete with flange plates, heads, sole plates, angle connections, etc. with hoisting and erecting in position

For suction pipe installing and dismantling 2 pumps Qtl 1 9394.28

Department of Soil and Water Conservation, Punjab

Project Name: Undergorund Pipeline Project for Utilization of Treated Water for Irrigation at STP RCF (Jalal Bhulana), Kapurthala (2 MLD)

Elecrtical Estimate for Pump Room

Sr. No. Description of items Unit Quantity Rate Amount (INR)

1 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (Without fan box) Each 2 1091.69

Wiring 16/20 Amp. Power plug control point Each 1 478.03

2 PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 2.5 sq. mm (Un-sheathed) Meter 80 36.98 3697.79

Overall size 4.0 sq. mm (Un-sheathed) Meter 80 53.41 5341.25

3 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring urposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-

Heavy Gauge PVC Conduit Pipe 25mm dia (Flushed) Meter 40 70.8 3539.76

4 G.I.Earthing: Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling).

Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) Each 3 3315.89

5 XLPE INSULATED ARMOURED CABLES (LOOSE):- Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part- 1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

Overall size 95 sq mm (4 core) Armoured (Loose) Meter 200 538.6 107720.38

Overall size 16 sq mm (4 core) Armoured (Loose) Meter 50 161.98 8098.78

6 MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 6-32 amp. (10kA, Curve-C) Each 6 190.58 1143.47

MCB Single Pole 40 amp. (10kA, Curve-C) Each 1 395.38

7 RCCB's: Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs

RCCB Double Pole 16/25 amp. Sensitivity 30mA Each 1 1948.13

8 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-

SP&N Double Door Distribution Board 8 way each Each 1 1416.27

9 CABLE TRAY: Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

Cable Tray Size 150mm X 50 mm X 50 mm (2mm thick) Meter 50 1066.35

10 Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2mtr. below ground level including excavation placing the pipe in position and back filling ith excavated soil etc. of the required size:- Double Walled Corrugated HDPE Pipe 120/103.5mm (Outer/ Inner dia.) Meter 200 290.77

11 LT PANEL Each 1 195442

Design, supply, erection& commissioning of following distribution panels made of 2 mm thick CRCA steel sheets, Floor mounted, fully enclosed, compartmentalized, dust & vermin proof with hinged & lockable doors, & complete with earthing, painting as required and mounted with the following : (for detail specs refer technical specifications).

MCC Panel for 2nos 7.5 HP pump

SECTION-1 INCOMER

MCCB Four Pole 100 amp.,415 volts,>25kA Fixed Magnetic and Adjustable Thermal setting

Metering & Controls

* ON/OFF phase indicating lamps with control fuses

* Ammeter complete with CT and selector switches as

*Voltmeter complete with selector switches as reqd.

SECTION-2 BUSBARS

100 TPN, A1 Bus Bars with heat shrinkable PVC sleeves

Neutral failure

Surge Protection

High voltage protection

Time delay protection

SECTION-3 OUTGOINGS

*16/25 A, four pole RCCB 30 ma Sensitivity- 4 No.+ 2 spare

*32 A, DP, 25 Ka MCB-2No.+2 spare

12 Supply and installation of Heavy Duty Exhaust fan 450mm with 1400rpm. Approved Make Crompton, Havells, Bajaj or equivalent Each 2 4634.31

13 Supply and installation of Led Tube light 20-22 watt with make of Phillips, Bajaj and Wipro. Item to include all amterial and lobour complete as per Specification and entire satisfaction of Engineer In Charge. Each 3 397.65

14 Supply and installation of Ceiling Fan 1200mm with Double ball bearing. Approved Make Crompton, Havelles, Bajaj or equivalent Each 2 2592.16

Total Electrical Estimated Amount

Department of Soil and Water Conservation, Punjab

Name of Work 2. :-Civil Work & Repair Work of Pipeline & Motors of STP Kapurthala at Distt Kapurthala

Pipeline & Civil Work

Sr. No. Particulars UOM Rate Quantity Amount

1 All charges for hiring Heavy Duty Crane/Hydra for material lifting and shifting of DI pipe for drain crossing hr 1364.546 24

2 All charges for hiring Excavator for excavation, material shifting, machinery and manpower route cleaning across drain hr 1389.356 24

3 Dismantling of manhole chamber including R.C.C top slab, C.I cover with frame including stacking of useful materials near the site including disposal of unserviceable material within 100m as desired by Engineer in-charge no. 2544.203 2

4 Constructing brick masonry manhole in cement mortar 1:5 (1 cement : 5 coarse sand) R.C.C top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00kg/cum, foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. Inside size 90x150cm and 120cm deep no. 23966.07 2

6 Providing, Stringing out, cutting, jointing and testing of ISI marked D.I. pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tylon joints fitted complete including all cartage, cost of rubber ring D.I pipe as per IS 8329 DI-K7 300mm i/d pipe lines laid complete near the starting point of sluice valve that needs to be buried underground mtr 4712.748

7 Providing, Stringing out, cutting, jointing and testing of ISI marked D.I. pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tylon joints fitted complete including all cartage, cost of rubber ring D.I pipe as per IS 8329 DI-K7 300mm i/d pipe lines laid complete (that needs to be hanged in air with the help of MS supports over the drain crossing) mtr 4712.748

8 Providing, Stringing out, cutting, jointing and testing of ISI marked D.I. pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tylon joints fitted complete including all cartage, cost of rubber ring D.I pipe as per IS 8329 DI-K7 300mm i/d pipe lines laid complete (that needs to be positioned vertically on both sides of the drain for connection to pump stand) mtr 4712.748

9 Supplying and laying D.I specials/fittings as per IS:9523-2000 (ISI marked with prior approval of Engineer-in-charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys etc complete in all respects D.I specials upto 300 mm i/d kg 122.0058

10 Lumpsum cost for construction and installation of MS support structure at the joints of DI pipe nos. 3200 4

11 Providing & fixing C.I/D.I flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge) Class PN-1 as per ISI 600mm i/d Sluice Valves flanged no. 147774.8 1

12 Supply of Alfa -Alfa Valves of Dia. 300mm nos. 1680 163

13 Supply of Anti-Theft Mechanism for 300mm dia alfa-alfa valves nos. 668

14 Fitting, testing, commissioning of alfa-alfa valve as per item 4(k) of e-tender No. DSWC/PVC-DWC-EMP/2026 nos. 2090.8

15 Excavation cost for footing of 600mmx600mm column cum 174.881

16 PCC 1:4:8 Below Footing cum 3824.205 0.968

17 M-20 Mechanically batch mix (complete) cum 5428.686

18 M-20 Mechanically batch mix (complete) cum 5428.686

19 M-20 Mechanically batch mix (complete) cum 5428.686

20 Fe500 grade for RCC work qtl 7920

21 Fe500 grade for RCC work qtl 7920

22 Fe500 grade for RCC work qtl 7920

23 Shuttering for Column sqm 502.5195

24 Shuttering for Pedestal sqm 502.5195

Department of Soil and Water Conservation, Punjab

Cost of Particulars for repairing of Motors & Control Panel of STP Kapurthala Project

Sr. No. Particulars UOM Rate Quantity Amount

1 Dismantling pump top cover, taking out defective mechanical seals, providing & fixing new mechanical seals of good quality job 29500 2

2 Wiring of pump body with H class enamel wire & H class insulation, complete job job 31000 2

3 Dismantling of pumps from tank and refitting the same job 18000 2

4 Repair of control panel:- i)Replacement of main contractor- 2 nos. ii)Replacement of timer star-delta- 1 no. iii)Replacement of overload relay- 1 no. iv)Cost of wire & thimbles- 1 no. v)Wiring charges and labour for commissioning of panel- 1 no. vi)Replacement of indicator set- 1 no. vii)Replacement of connection plate- 1 no. job 30000 2

5 Carriage of pump and T&P to Moga & Kapurthala to site including loading & unloading job 18000 1

6 Dewatering of tank with temporary arrangement of pump set, pipes & starter arrangement, complete job job 68000 1

7 Fitting of new chain pulley arrangement, provision of new steel chain & grinder chain, complete job for taking out of pumping set. (Capacity = 2 Ton or as per site requirement) job 52000 1