RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Almirah Steel ( 2 pieces ) ( Under PAC ) Make godrejinterio Model godrejinteriostorwelmodeltwo Technical Specifications 1/4 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) MATERIAL Material M.S sheet conforming to commercial quality CR- 1
RequiredGrade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1
RequiredGrade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 Material of Almirah Doors M S Sheet M S Sheet Sheet Thickness of Locker 0.9 mm 0.9 mm Length of Glass Sheet ±10 (mm) N.A N.A Width of Glass Sheet ±10 (mm) N.A N.A Sheet Thickness of door in mm 0.9 mm 0.9 mm Sheet Thickness of sides
Requiredback
RequiredTop and Bottom 0.8 mm (Minimum) 0.8 mm (Minimum) Sheet Thickness of Shelves 0.8 mm 0.8 mm Sheet Thickness of Pedestal in mm 0.9 mm 0.9 mm Material of Lock lock having made of steel with zinc plated finish having brass levers and MAZAK ZAMAK bolts having zinc plated finish along with MAZAK/ZAMAK handle lock having made of steel with zinc plated finish having brass levers and MAZAK ZAMAK bolts having zinc plated finish along with MAZAK/ZAMAK handle Material of Keys steel steel GENERIC Conformity to Indian Standard IS:3312 latest No No No of shelves (Nos) 3 3 Type of Shelves Adjustable Adjustable Locker Provided Yes Yes Locking System with the locker YES YES Cloth hanging provision in the Almirah Yes * 2/4 Number of Doors (Nos) 2 2 Door Stiffner upto full door height Provided with the almirah doors Yes Yes Number of Hinges with each door (Nos) - No hinges if having sliding door with top hanging arrangement 3 3 Number of Glass Sheet fixed in each Almirah door (Nos) N.A N.A Construction Welded Welded Lock Three Way bolting device controlled by 6 lever lock Three Way bolting device controlled by 6 lever lock DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1855 Width in mm (± 7 mm) 910 910.0 Depth in mm (±5 mm) 486 486.0 Inside Height of Locker in mm (± 5 mm) 290 mm 290 mm Inside Width of Locker i mm (±5 mm) 910 mm 910 mm Inside Depth of Locker in mm (±5 mm) 486 mm 486 mm Width of Stiffner in mm (±5 mm) 115 mm 115 mm Thickness of MS Sheet of Stiffner (in mm) 0.9 mm 0.9 mm Stiffened Pedestal height in mm (±2 mm) 130 130 Pedestal Width in mm (±2 mm) 80 80 COLOUR & FINISH Finish powder coated powder coated Colour of Paint ash gray * 3/4 Packing: Five Ply Corrugated Board And Strapped With 12 Mm Hdpe Strap * CERTIFICATION ISI marked No * CM/L No. NA * WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 1 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
