NIT-05/BIADA/2026-27 Road widening with a new flexible paved road, Re-surfacing laying paver blocks, construction of RCC drains, Culvert, Kerb stones, main gate and installation of street lights at Industrial Area Bettiah.

Clearing and Grubbing Road Land (Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.)

Excavation in soil with Dozer with lead upto 1000 metres

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a alead of 1000 metres, stacking serviceable and unserviceable materials separately

Construction of Embankment with Material obtained from Borrow pit.

Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, ransporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2.

Stripping, Storing and Re-laying Top Soil from Borrow Areas in Agriculture Fields

Granular Sub-Base with Graded Material ( Table:- 400- 1)

Wet Mix Macadam (Plant mix method) (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base /base course on well prepared surface and compacting with vibratory roller to achieve the desired.density.)

Prime coat over WMM/WBM .Providing and applying primer coat with cutback MC-30 bitumine emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60kg/sqm using mechanical means.

Tack coat on Bituminous Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.

Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm.

Bituminous Macadam Grading-II

Dense Grade Macadam Grading-II Providing and laying dense graded Bituminous madam with higer capacity batch type HPM using crushed aggregate of specified grading premixed with bituminous binder @ 4.5 percent by weight of total mix and filler,transporting to the hot mix to work site laying with a hydrostatics paver finisher control to the required grade,level and alingment,rollingwith smooth wheeled,vibratory and tandem to achive the desired compaction as per MORT&H specification clauses.505 complete in all respect.

Bituminous Concrete Grading-II Providing and laying Bituminous concrete with higer capacity batch type mix plant using crushed aggregates of specified grading premixed with bituminous binder @ 5.4 percent by weight of total mix and filler,transporting to the hot mix to work site laying with a hydrostatics paver finisher control to the required grade,level and alingment,rollingwith smooth wheeled,vibratory and tandem to achive the desired compaction as per MORT&H specification clauses.507 complete in all respect.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)

Cast - in - situ Cement Concrete M20 Kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M20 grade PCC on M10 grade foundation 150 mm thick, Kerb Channel 300 mm wide , 50 mm thick in PCC M20 grade slope towards kerb, kerb stone with channel laid with kerb laying machine , foundation concrete laid manuually , all complete as per clause 409)

Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)

Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge:

Planting and Maintaining of Flowering Plants and Shrubs

Chequerred Precast cement concrete tiles 22 mm thick with marble chips of size 6 mm in footpath & courtyard jointed with pigment to match the shade of tiles including rubbing and cleaning e.t.c complete on 20 mm thick bed of cement mortar 1:4

Stone Chips(Mirzacheuki )

Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed.

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength and admixtures in recommended proportions as per IS: 9103 to accelerate, reinforcement,durability as per direction of Engineer-in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum.Excess or less cement used as per design mix is payable or recoverable separately. All works up to Plinth level.

Providing and laying in position specified grade of Reinforced cement concrete work in wall (any thickness),including attached pilasters, buttresses, plinth and string coursed, fillets, columns, pillars, piers, abutments, posts and struts, etc. Up to floor five level excluding cost of centring, shuttering, finisnin and reinforcement.1:1:5:3 (1 cement :1.5 coarse sand 0.3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams, suspended floors,roofs having slope up to 15, landings, balconies, shelves,chajjas,lintels, bands,plain window sills,staircases and spiral stair cases up to floor five levl excluding the cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size)

Centring and shuttering including strutting, propping etc. and removal of form for.

Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc.

Suspended floors, roots, landings, balcnies and access platform.

Lintels, beams, plinth beam, girders, ressumers and cantilever.

Stiffners, column, pillars, piers, Abutment

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia.

Thermo-Mechanically Treated bars TMTC-500-12mm dia.

Thermo-Mechanically Treated barsTMT Fe-500-16mm to 25 mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead

Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

metre

Extra for Brick work in superstructure above plinth level upto floor V cum Cement mortar 1 .:4 (1 cement: 4 coarse sand )

Brick work with bricks of class designation 100A in foundation and plinth in:

Providing and laying autoclaved aerated cement blocks masonry with 125mm/250mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all comlete.

Fixed to openings/ wooden frames with rawl plugs screws etc .

20 mm cement plaster of mix ;

1: 4(1 cement: 4 coarse sand)

Cement plaster in coarse sand 12 mm Cement plaster of mix.1:4(1 cement : 4 coarse sand)

Cement plaster in course sand 12mm cement plaster of mix :

6 mm Cement plaster to ceiling of mix :

20mm cement plaster of mix :

Colour washing such as green, blue or buff to give an even shade

Making 25 cm (10'') dia bore up to 4 mtr below ground with hand auger of approved quality in ordinary soil(vide classification of soil item - A) true to plum and without eccentricity in any stage of opration and disposal of the excavated earth up to 50 m lead including all lifts all complete as per approved design and direction of E/I.

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade.New work (three or more coats).

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

In stringers, treads landings etc. of stair cases including use of required plates wherever required all complete.

Providing and fixing concertina coil fencing with panched concertina coil 600 mm dia 10 mtr. Openable length (total length 90 metre) having 50 no round per 6 metre length, up to 3 metre hight of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. Reinforced wire, stud tied with G.I. steples and G.I clip to retain horizontal, including necessary bolts or G.I. barbed wire tide to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq mm with tape (.52 mm thick) and weight 43.478 gm/metre (Cost of M.S. Angle, C.C. blocks shall be paid separately)

Demolishing RCC work including stacking of steel bars and Disposal of unserviceable material withing 50 meter lead

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protectivesurface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality

Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

Providing and fixing alluminium sliding door bolt anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with nuts and screws etc. complete.

Providing and fixing aluminium sliding tower bolt (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with nuts screws etc. necessary screws etc. complete.

Providing and fixing aluminium handles (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI marked, anodised (anodic coating not less than grade AC 10as per IS:1868) transparent or dyed to as required. colour and shade with necessary screws etc. complete.

Providing and fixing bright finished brass 100 mm mortice latch and lock with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 ( 1 lime : 1 surkhi: 1 coarse sand) / 1:4(1 cement:4 coarse sand)

Extra for providing edge moulding to 18 mm thick Granite stone counter over item no.8.2.4 including machine polishing to edge to give high gloss finish etc. complete as per design approved by E/I.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.

Finishing walls with textured exterior paint of as required. shade :

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work.

Providing and fixing APP (Atactic Polypropylene Polymer ) modifieid prefabricated five layer 3mm thick water proofing membrane,black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sq. mtr. by the same membrane manufacture of density at 25degree centigrate,0.87 -0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc. and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be : joint strength in longitudinal and transvers direction at 23 degree centigrate as 650 / 450 N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150degree . Cold flexibility shall be upto -2 degree centigrate when tested in accordance with ASTM, D-5147 . The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.

3 mm thick

Demolishing Brick work including stacking of serviceable material and Disposal of unserviceable material withing 50 meter lead

Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1.3.6(1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or raw) plugs and screws or with faing dips or with bolts and nuts as required, including groviding and fixing of glass panes with glazing dips and special metal-sash putty pf approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal

Supply and erection of 7 meter height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, made of 3 mm thick sheet alongwith base plate of size 260 x 260 x 16 .mm , small door opening for junction box mounting including 6A C series SP MCB,connectorand suitable size foundation bolts with template as required (but witout pole foundation.

single arm, 1000 mm

Double arm,1000 mm

Supplying and embedding following dia G.I pipe (medium class) in pole collar/foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

40 mm dia

Supplying and fixing pole mounted junction box/fuse box for three phase/4 core high wattage HPSV/HPMV/MH street light pole with all accessories and connection etc. as required .

Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as required.

2 x 1.5 sq. mm.

Earthing with G.I earth pipe 4.5 mtr long, 40 mm dia including acessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.

Supplying and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and refilling etc. as required

Meter

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I.fittings including trenching ( 75 cm deep) and re-filling etc. as required .

Meter

Meter

above 35 sq. mm and up to 95 sq. mm.

Meter

Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

3.5x50 Sq.mm(35 mm)

3.5x150 Sq.mm(50 mm)

4 Core, 16 Sq. mm XLPE/PVC insulated PVC sheathed(heavy duty)armoured electric cable with aluminum conductor.

3.5 Core, 50 Sq. mm XLPE/PVC insulated PVC sheathed(heavy duty)armoured electric cable with aluminum conductor.

Meter

Demolishing cement concrete including disposal of material within 50 meters lead.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttring all work up to plinth level.

Providing and fixing M.V.danger notice plate of 200 mmx150 mm, made of mild steel at least 2 mm thick, vitreous enameled white on both sides and with inscription in single red colour on front side as required.

25/100 Amp,16 KA

Providing and fixing following capacity 4 pole on load/panel mounted changeover, switches inside the existing cubical panel board including drilling holes in cubical panel making connection etc. as required.

200 Amp 4 pole

Supplying and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indicator in the existing cubical panel board including drilling holes in the panel board making connections etc. as required.

16 sq. mm ISI mark PVC insulated single core copper conductor cable.

Supplying and fixing following rating , 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 to 63 amps, Triple pole and neutral.

3out put(1output per phase) and suitable for three phase supply.

Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required.

Providing and fixing following rating and breaking capacity MCCB in existing cubical panel board including drilling holes in cubical panel, making connections etc. as required.

25/100 Amp, 16 KA

Supplying and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indicator in the existing cubical panel board including drilling holes in the panel board making connections etc. as required.

10sq. mm ISI marked, PVC insulated single core copper conductor cable.

Meter

Providing and fixing at location a signs made up of I sign-display signage with 100 mm depth Aluminium extrusion Alloy 6060 as per European standards with Premium grade Anodizing (Thickness 15-20 microns) Flatness & Twist of profile within 1.5 mm/meter length, & 80 mm Radius with 10 Years warranty under normal working conditions. Media accomodation depth of 8 mm avialble for pasting on dual lock or strong two way adhesive. M.S fabrication slot of 65 mm depth for Internal M.S structure. Media upto 6 mm thickness can be pasted or mounted with help of dual lock tape assembled totem can be edge lite with help of edge lite modules or back lite with help of back lite modules. Totem profiles screwed fixed with internal M.S structure are Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge Excludes Civil work, if any.

Providing and fixing in position Pole mounted Speed limit-Informational signage consisting of the following: 1. Signage face made out of-3mm thick Aluminum sheet fabrication with a white retroreflective film, fixed to horizontal structural truss. Graphics as per requirement of respective vinyl and shade. 2. Signage structure-MS square post shaped 75 x 35 x 5mm (channel made up of 35 x 35X3; Langles) and mounting square sections, powder coated as per. Mounting square section span and the wind loads. 3. Sign frame modular aluminium profile Module plus outdoor system Consisting of main pole 80 mm Octagonal shaped (2 nos) screw fitted with MS structure vertically & horizontally, 2 Coverlist profile inserted in octagonal shaped profile to hide screw fitting arrangement completely. Plastic moulded endcap (black coloured) on top side to cover octagonal shaped profile, actthed to with 50 mm depth aluminium frame with 80 mm radius round corners as per design requirements for media signage mounting, with media accomodation depth of 6 mm, frame screw fitted at multiple position along vertical and horizontal side facing the octagonal pole. 4. Media-ACP/Acrylic router cut vinyl warraped/pasted with thickness upto 5 mm can be pasted (with help of dual lock or foam based 3M make double sided tape) on 50 mm depth profile (on both side). including post, electrical connections (as required),

Providing and fixing external directional signs made up of display signage with 100 mm depth Aluminium extrusion Alloy 6063 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) Flatness & Twist of profile within 1.5 mm/meter length, with under 5 years warranty under normal working condition. 3M Retro Reflective Sheet Type IV Pasted on Media with 3M Elctrocut Overlay film as per approved creative. M.5 fabrication slot of 65 mm depth for internal M.S structure. Media upto 4 mm thickness can be pasted or mounted with help of 3M VHB D/S tape. Totem profiles screwed fixed with internal M.S structure are installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing & Fixing of Stainless Steel 304 Grade box type letter made with laser welding technology and Led light Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Cost of Work as per BOQ (Rs.)

Requirement

Affadavit as per SBD

(A) Indian post office term deposit 3 year/5year/National Saving Certificate/ Kishan Vikash Patra duly endorsed by the Competent Postal authority in Bihar issued in the same year.

As per NIT/SBD

As per NIT/SBD

As per NIT/SBD

As per attached SBD/Appendix

A = Maximum value of civil engineering works executed in any one year during the last five years (updated to the price level of the year indicated in Appendix) taking into account the completed as well as works in progress. N = Number of years prescribed for completion of the works for which bids are invited. B = Value (updated to the price level of the year indicated in Appendix) of existing commitments and on-going works to be completed during the next one year. (As per attached SBD)

As per format attached in SBD

As per format attached in SBD

As per format attached in SBD

As per format attached in SBD

Proposal, If any for sub contracting of elements of work, costing more that 10% of the Bid amount.

Authority to seek references from the bidders bankers.

The proposed methodology and programme of construction, backed with equipment planning and deployment, duly supported broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones (As per attached SBD)

As per attached SBD

As per attached SBD

As per attached SBD

As per NIT/SBD

As per NIT/SBD

As per NIT/SBD

As per NIT/SBD

As per NIT/SBD

As per as per SBD

As per as per SBD

DATE OF ISSUE OF TENDER

COST OF WORK AS PER BOQ Rs.

COMPLETION PERIOD IN MONTHS

REQUIREMENT

Department

Department

(i) Individual/Partnership/Pvt. Ltd./Public Ltd.

Bids from Joint ventures are acceptable above Rs. 10.00 Crore Projects. The tenderer will have to submit the Joint Venture documents as per eligibility criteria & other instructions issued vide Road Construction Department letter No. 8131(S) dated 24.7.2012.

Attach self attested copy

Attach self attested copy

10000+18% GST = Rs. 11800.00

(A) Unconditional bank guarantee from any scheduled Indian bank in the format given ATTACH AS PRESCRIBED IN SEC-2 OF SBD (B) e-Payment Amount To Be Entered (Rs. In Lakhs)

Satisfactory completed at least one similar nature work of value not less than 50% of estimated value of contract (Rs. In Lakhs). The completion certificate shall be issued by employer not below the rank of Executive Engineer.

MINIMUM QUANTITY / AMOUNT AS PRESCRIBED IN SBD

FY 2020-2021 Amount To be entered (Rs in Lakhs)

CERTIFICATE ISSUED BY BANK AS PER PRESCRIBED FORMAT IN SEC-2 OF SBD ON AND AFTER DATE OF TENDER

A = Maximum value of civil engineering works executed in any one year during the last five years (updated to the price level of the year indicated in Appendix) taking into account the completed as well as works in progress. N = Number of years prescribed for completion of the works for which bids are invited. B = Value (updated to the price level of the year indicated in Appendix) of existing commitments and on-going works to be completed during the next ----- year (period of completion of the works for which bids are invited).

ATTACH AS PER SEC 2- 1.4(A) ON & AFTER DATE OF TENDER ( Bidder must decleare themselve their all exising commitment hiding fact be sufficient cause for rejection)

CERTIFICATE ISSUED BY BANK AS PER PRESCRIBED FORMAT IN SEC-2 ON AND AFTER DATE OF TENDER

(i) ATTACH AFFIDAVIT AS PRESCRIBED IN SEC-2 OF SBD ON AND AFTER DATE OF TENDER

Attach a Valid Character Certificate of Tenderer issued by competent authority

(i) ATTACH AS PRESCRIBED IN SEC-2 OF SBD I.T.B. 4.2(ii)

Attach Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount as prescribed in SBD. ATTACH AFFIDAVIT AS PRESCRIBED IN SEC-2 ON & AFTER DATE OF TENDER

The proposed methodology and programme of construction, backed with equipment planning and deployment, duly supported broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones . ATTACH DESCRIPTIONS,DRAWINGS AND CHARTS AS NECESSARY

AS PER SEC-2-1.6 OF SBD ATTACH NECESSARY CERTIFICATE AND CURRENT AIIFIDAVIT OF BOTH EMPLOYEE AND EMPLOYER ON AND AFTER DATE OF TENDER

AS PER SEC 2-1.5 OF SBD MAX. AGE 5 YEARS ATTACH OWNED VOUCHER/CASH MEMO/INVOICE AND AFFIDAVIT IN CASE OF LEASED/HIRE ON AND AFTER DATE OF TENDER

ABOVE/BELOW (+) or (-) QUOTED BY CONTRACTOR