REPAIR MAINT OF EXTERNAL WATER SUPPLY AND ALLIED WORKS IN DOMESTIC AREA OF WAR MEMORIAL COLONY AND MES COLONY 60 SCIENTIST HOSTEL TECH AREA DMSRDE UNDER GE I R AND D KANPUR

Amount

Excavation in trenches, for laying of pipe line not exceeding 1.5 mtr wide and not exceeding 1.5 meter in depth and getting out in soft/ loose soil complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/ loose soil complete all as specified and directed.

Removing excavated material in soft/ loose soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 30 cm in depth not exceeding 60 cm in width for passing of GI/CI pipes including making good with PCC work complete all as specified and directed .

Taking up/ down of following bores of steel tubing and connections from excavated trenches and building up to tripple storey with due care from site complete all as specified and directed : 15 mm nominal bore

All as per Ser Item No 5.00 above but 20 mm nominal bore

All as per Ser Item No 5.00 above but 25 mm nominal bore

All as per Ser Item No 5.00 above but 40 mm nominal bore

All as per Ser Item No 5.00 above but 50 mm nominal bore

All as per Ser Item No 5.00 above but 80 mm nominal bore

Supply & Fixing for replacement of following bore of GI tube medium grade/ ISI marked complete with all fittings (such as bends, elow, tees, connectors, caps, plugs, unions etc) including cutting, screwing as required and fixed to wall or roof or laid on floor or in trenches including fixing wall hooks, cutting through wall, floors etc and making good the disturbed surface with cement mrtar 1:3 after fixing the tubes complete all as specified and directed : 15 mm nominal bore

All as per Ser Item No 11.00 above but 20 mm nominal bore

All as per Ser Item No 11.00 above but 25 mm nominal bore

All as per Ser Item No 11.00 above but 40 mm nominal bore

All as per Ser Item No 11.00 above but 50 mm nominal bore

All as per Ser Item No 11.00 above but 80 mm nominal bore

Re-laying, jointing and testing old but serviceable GI tubing of following bore (obtained from srl item No-6) and connection in new or old portion incl new fittings such as bends, elbows, union, tees, reducers etc as required at site laid in trenches or on floor or wall complete and making good all disturbed surfaces of wall/ floor/ road/ path to match with existing specification all as specified and as directed : 15 mm nominal bore

All as per Ser Item No 17.00 above but 20 mm nominal bore

All as per Ser Item No 17.00 above but 25 mm nominal bore

All as per Ser Item No 17.00 above but 40 mm nominal bore

All as per Ser Item No 17.00 above but 50 mm nominal bore

All as per Ser Item No 17.00 above but 80 mm nominal bore

Disconnecting, dismaantling and taking down CI/GI/DI/Cemented pipe line of size 100mm bore, including all fittings with spigot and socket/ flanged end or any type, lead joint including removing from site complete all as specified and directed.

All as per Ser Item No 23.00 above but of size 150mm.

All as per Ser Item No 23.00 but of size 200mm.

M&L in replacement of ductile iron pies 100mm bore incl rubber gasket joints and other relative accessories, class K-7 in any length laid in trenches complete all as specified and directed.

All as per Ser Item No 26.00 but of size 150 mm.

All as per Ser Item No 26.00 but of size 200 mm.

S&F in replacement of cast iron double flanged sluice valve of size 80mm bore class PN 1.0 confirming to IS 14846/2000 with with high tensile stainless steel spindle with CI wheel, Gun Metal Nuts/rings 'I' bolt, ISI marked including replacement of rubber packing complete all as specified and directed.

All as per Ser Item No 29.00 above but sluice valve of size 100mm.

All as per Ser Item No 29.00 above but sluice valve of size 150mm.

All as per Ser Item No 29.00 above but sluice valve of size 200mm.

S&F in replacement of cast iron double flanged sluice valve of 150mm dia class PN 1.6 confirming to IS 14846/2000 with with high tensile stainless steel spindle with CI wheel, Gun Metal Nuts/rings 'I' bolt, ISI marked including replacement of rubber packing complete all as specified and directed.

Material & Labour to repair leakages through lead joints from existing CI/DI pipe, fittings, tee, bends tail pieces, connecting pieces etc by using previously used and additional run lead , spun yarn including caulking to make the joints water tight including excavation works as required complete all as specified and directed for the following bore pipe line : size 80/100 mm

All as per Ser Item No 34.00 above but of size 150/200 mm.

M&L for Cast iron/ductile iron special fittings for spigot and socketed pipes such as bends (any type, radius and angle) socket tapers any type, (straight, bend, increasing, decreasing or double socket etc) Tee pieces, single branch, Y junction, double branch, cross (all sockets or socket and spigot) collers, caps and plugs for upto 150 mm bore pipes complete all as specified and directed.

S&F gun metal iron gate valve 20mm dia with iron wheel head, screwed both ends for iron pipe, ISI marked, complete all as specified including dismantling the old unserviceable existing valve complete.

All as per Ser Item No 37.00 above but of size 25 mm bore.

All as per Ser Item No 37.00 above but of size 40 mm bore.

All as per Ser Item No 37.00 above but of size 50 mm bore.

M&L for opening up of leaking sluice valve 200mm and repacking of stuffing box & replacement of gland packing, nuts, bolts & washers, rubber gaskets etc complete all as specified .

M&L for opening up of leaking sluice valve 80 to 150mm and repacking of stuffing box & replacement of gland packing, nuts, bolts & washers, rubber gaskets etc complete all as specified .

M&L for opeining sluice valve and replacement stainless steel spindle with checknut suitable for sluice valve of size 80 to 150mm bore complete all as directed.

Cutting and removing unwanted grass and wild growth including bushes and shrubs from the roots at water supply installations including removing and even finish the entire area complete all as specified and directed at site by Engineer in charge.

Supply & Feeding/Dissolving calcium Hypo chlorite having 65% to 70% chlorine content Granular Chlorination Chemical (Water Treatment Chemical ), free flowing granular material free of foreign matter in 45 Kg in sealed packing complete all as specified and directed. Note : Feeding of calcium Hypo chlorite granules to dozer pump should be done on daily basis in limited amount as specified by Engg-in-charge.

Material and Labour for brick masonry valve pit chamber of size 1200mm x 1200mm x 1200 mm (internal) complete with PCC (1:3:6) type C-2 for foundation, brick work in Cement Mortar (1:6), 15 mm thick plastering in Cement Mortar (1:4) (internally) including 6.0 mm thick MS plate covering and angle iron frame of 40mm x 40mm x 6.0 mm including coping, 100 mm thick, PCC flooring in 1:2:4 type B-1 and two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces with locking arrangement complete all as specified and directed.

Material and Labour for brick masonry valve pit chamber of size 1000mm x 1000mm x 1000 mm (internal) complete with PCC (1:3:6) type C-2 for foundation, brick work in Cement Mortar (1:6), 15 mm thick plastering in Cement Mortar (1:4) (internally) including 6.0 mm thick MS plate covering and angle iron frame of 40mm x 40mm x 6.0 mm including coping, 100 mm thick, PCC flooring in 1:2:4 type B-1 and two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces with locking arrangement complete all as specified and directed.

Testing of drinking water for chemical analysis as per IS 10500:2012 guideline after lifting the sample from pump as per testing guide line enumarated in test physical parameter (pH value, turbudity,colour, order) Chemical parameter (Amonia free & saline,Ammonia Albuminoid o2 absorbed , nitrate, chloride, hardness temprory and permanent , TDS , Metal Iron , Magnese, Zinc, Calcium, Magnisium, Sulphate, Phenolic Sustances) all as directed by Engr In Charge. Make: Bhart Test House/HBTU/ Sepectro, BalaJee Labs

Supply and replacement of Bib tap 15 mm size ISI marked standard of PTMT any colour high pressure screwed for iron pipes and fixed.

Attending of day to day complaints of external water supply of any floor and all nature i.e. leakage in water pipe lines ,fittings /fixture , no water supply including all type of complaint noted in complaint register all complaints slips received from the complaint cell and deposit the complaint slip after reactification and obtained signature of users with necessary T & P with experianced trade man with GI fittings i.e. elbow,tee,reducer,union,long screw socket ,nipple ,plug etc complete all as directed . Note : The complaint shall be attended and defect shall be rectified with in 24 hrs commencing from the date and time of notifying the complaint failing which a penalty @ Rs 100 per complaint per day shall be recovered from BIll.

S&F in replacement of 150 mm bore non return valve both end flanged suitable for cast iron pipe including all fittings washer, nuts & bolt etc complete all as specified and directed.

M&L for quarterly cleaning after disconnecting and stopping of incoming and outgoing pipes of RCC over head tank of capacity 1,00,000 gallon by means of hassen clothe to avoid choking of distribution pipe lines,removing total water ,frame the over head tank,cleaning tank complete with steel brush, removing complete settled dirt /sand/silt and flushing the complete tank through wash out pipes,cleaning of pipes(Rising, delivery wash out ,over flow pipes),Sluice valve of any size including painting after cleaning surface of pipes with existing shade of synthetic enamel paint and date of cleaning shall also be mentioned on over head tank of pillar with synthetic enamel paint, including removing bee hives from OH Tank if present as directed by Engr-in-Charge at site complete all as specified and directed Note:- (a) The work shall be carried out through trained staff with hygiene and safety equipment. (b) Responsibility for insurance and safety of team will solely rest with the contractor.

M&L for quarterly cleaning after disconnecting and stopping of incoming and outgoing pipes of RCC over head tank of capacity 50,000 gallon by means of hassen clothe to avoid choking of distribution pipe lines,removing total water ,frame the over head tank,cleaning tank complete with steel brush, removing complete settled dirt /sand/silt and flushing the complete tank through wash out pipes,cleaning of pipes(Rising, delivery wash out ,over flow pipes),Sluice valve of any size including painting after cleaning surface of pipes with existing shade of synthetic enamel paint and date of cleaning shall also be mentioned on over head tank of pillar with synthetic enamel paint, including removing bee hives from OH Tank if present as directed by Engr-in-Charge at site complete all as specified and directed Note:- (a) The work shall be carried out through trained staff with hygiene and safety equipment. (b) Responsibility for insurance and safety of team will solely rest with the contractor.

S&F in replacement Digital AC Volt meter ( 0 to 500/600 Volt) , square size, flush mounted case, complete all as specified and directed .

S&F in replacement Digital AC Ammeter ( 0 to 200 Amp ), CT Operated - 5 Amps, square type, flush mounted case,complete all as specified and directed.

S&F in replacement single phase preventer VSP3 auto reset 50 volts unbalanced type for 30to 50 HP submersible pump set completet all as specified.

S&F in replacement of fully automatic star delta starter, suitable for 30to 50 HP submersible motor, 3 phase 440 volt complete with over load protection with adjustable relay range, electronic timer relay and single phasing preventor incl suitable size 40X4 mm angle iron frame grouted on wall for proper mounting arrangement all as specified.

S&F in replacement of Power contactor TP as per existing type & make fitted at site for starter suitable for 40 HP/30HP/20 HP submersible pump set. Make- L&T/Legrand/Siemens0

S&F in repair Over load relay (as per sample) for starter suitable for 40 HP/30HP/20HP submersible pump set. Make- L&T/Legrand/Siemens

S&F in repair Timer (as per sample) suitable for star delta starter for 40/30/25/20 HP submersible pump set. Make- L&T/Legrand/Siemens

M&L for replacement of MS angle iron/Channel support for motor/pump incl nut bolt etc incl painting and making good all disturbed surfaces with PCC 1:2:4 complete all as spfd and directed.

M&L for repairing the leakage of flange end joints for MS/CI pipe by doing welding incl replacement of rubber gasket, nut, bolt and washers etc bailing out pipe line water as required and directed for the sizes upto 150mm bore.

Taking / lifting out defective submersible pumps set from bore well complete with column pipe upto 150mm dia steel rope, submersible cable and accessories etc and relowering and commissioning the same after repairing works including rubber gasket and testing complete of rating 20 to 30 HP 3 phase.

Dismantling, taking out complete burnt winding wire of submersible motor including cleaning of stator slots replacement of defective parts and rewinding with existing type & gauge of copper winding wire pvc insulated as per motor capacity and using new insulation material such as insulating paper sleeves etc.replacement of submersible cable as required size/ length complete incl testing all as directed of rating 20 to 30 HP 3 phase. Noe : The cost of transportation from pump house/yard to workshop and workshop to pump house/yard shall deemed to be included in item rate quoted by contractor.

Dismantling submersible pump, straightening & polishing of pump shaft, making threading and key way, turning surfacing polishing to impellers, CI bowl complete including replacement of worn out parts as per requirement complete incl testing and all as directed of rating 20 to 30 HP 3 Phase. Noe : The cost of transportation from pump house/yard to workshop and workshop to pump house/yard shall deemed to be included in item rate quoted by contractor.

Supply only components/spare parts of existing discription and make for the submersible pumps and motors of capacity as under:- SS impellers with Key and distance bushes suitable for existing submersible pump set

All as per Ser Item No 66.00 above but NRV for submersible pump set

All as per Ser Item No 66.00 above but Thrust Bearing for submersible pump set

All as per Ser Item No 66.00 above but Neck ring submersible pump set

All as per Ser Item No 66.00 above but Distance sleeves suitable for existing submersible pump set

All as per Ser Item No 66.00 above but High tensile nut bolts suitable for existing submersible pump set

All as per Ser Item No 66.00 above but GM motor bush upper and lower (set of two)

All as per Ser Item No 66.00 above but Rotor bearing sleeve upper and lower

All as per Ser Item No 66.00 above but Coupling with key for motor pump

All as per Ser Item No 66.00 above but Sand Guard for submersible pump set

All as per Ser Item No 66.00 above but Housing upper & lower

All as per Ser Item No 66.00 above but Steel wire rope stranded 12 mm dia for hanging of submersible pump set .

All as per Ser Item No 66.00 above but Electric cable for submersible pump set, flat 10 Sqmm 3 core stranded copper conductor PVC sheathed cable all as specified and directed. Make- Finolex/ Paragon/Havells

All as per Ser Item No 66.00 above but Electric cable for submersible pump set, flat 16 Sqmm 3 core stranded copper conductor PVC sheathed cable all as specified and directed. Make- Finolex/ Paragon/Havells

Supply only MS column pipe heavy Duty of size 150 mm nominal dia in standard length of 3.0 mtr, heavy duty duly threaded welded with MS Flange of 12 mm thick on both end with supporting ribs (4 Nos.) including jointing & with new rubber or fiber board gasket with all nuts, bolts and washer set complete all as specified and directed of Make : Jindal/TATA.

M&L for maintenance of chloronome plant (Granuals based dosing plant) as specified by Engg-incharge which include the following :- (ii) Cleaning of plant room . (ii) Checking of Chlorination plants /testing of complete system for serviceability of plant. (iii) Maintenance and servicing of Agitator by using necessary lubricant, replacement of bush/bearing all as directed.

S&F Gear motor as per existing 230 volt, 50 Hz complete all as specified and directed.

S&F Rotor assembly as per existing model complete all as specified and directed.

S&F Pump tube as per existing model complete all as specified and directed.

S&F Injection check valve 3/8" size.as per existing model complete all as specified and directed.

S&F Weighted suction line strainer 3/8" size as per existing model complete all as specified and directed.

S&F Agitator Shaft with impeller made poly propylene rigid 32 mm dia and 500 mm length complete as per existing model complete all as specified and directed.

S&F Check valve duck bill as per existing model complete all as specified and directed.

S&F of PVC Tubing suction /discharge line 3/8" size heavy duty as per sample complete all as specified and directed..

M&L for replacement of Head of dosing pump with accessories including Connecting Nuts, and Ferrules all as directed.

M&L for rewinding of agitator motor of capacity 120 watts, 960 RPM single phase 230 V and using copper winding wire of existing gauge with necessary insulation material including testing after repair and refixing of the same complete all as directed.

Supply and fixing in replacement of on onload changeover switch of 125 Amps 4 pole 415 V, panel mouting metal enclosure type without enclosure,including labour for alterration in panel etc comlete. Make : Havells/L&T / HPL/ Indoasian

S&F in replacement of MCCB 4 Pole 415 Volts 3 phase 160 Amps 25 KA, thermal magnetic release connection complete all as specified

S&F in replacement of MCCB 3 Pole 415 Volts 3 phase 125 Amps 16 KA, thermal magnetic release connection complete all as specified

S&F in replacement of MCCB 3 Pole 415 Volts 3 phase 63 Amps 16 KA, thermal magnetic release connection complete all as specified

Supply and laying in replacement of trenches or fixing to wall/pole or passing through pipe in replacement of XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 50 Sqmm 3.5 core. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification)

M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable

M&L for Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required.

Taking down & lowering sewage water pump form sludge well and repair/maint of motor pump set up to 2 HP capacity including replacement of seal bearing etc necessary repair to make rigid the system complete all as directed.

Dismantling the motor , taking out the burnt copper winding wire of motor up to 2 HP and Rewinding of motor with existing copper wire of existing gauge as per motor capacity using new insulation material such as insulating paper sleeves etc. bakinmg complete with super enamelled insulating varnish including cleaning of stator slots and testing complete, all as directed

DEO Traders (BID ID -3489168)