8706/GWL/E8 SPECIAL REPAIR OF 03 STORES OF BASIC GP BLDG NO T-7 TO T-9 AND CONSTRUCTION OF OPEN SHED AT MORAR CANTT GWALIOR

Amount

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

S&F, Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 10mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded incl filling of PCC 1:3:6 type C0 using 12.5 mm graded stone aggregate in hollow section of frame all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F in GI wire cloth,0.48 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed.

M&L Plain Sheet glass ordinary quality and glazing with oil putty in square but not exc. 0.5 sqm in each pane 3 mm thick.

Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed.

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as directed by Engineer -in -charge.

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm plain steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding (ridge) to wall fixed with self tapping screws complete all as directed .

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed

M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed

S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde E-165) , complete all as specified and directed.

S&F MS Black plain sheet in wall clading and similar work cut to size and fixed to steel frames work with 40 mm lap joint including welding ,bending or turning of 1.60 mm thick complete all as specified.

M&L for applying for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified

M&L two coat of synthetic enamel paint over coat of Red oxide primer over old steel surfaces nexc 10 cm width or girth complete all as specified and directed

Demolition of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed.

S&Fof False ceiling 4 mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic size 600mm x 600 mm/ 595 mm x595 mm) decorative finish fixed with clips and screw including powder coated galvanised MS grid frame work false ceiling of (Main Tee size 38mmx24mmx0.65mm cross tee 4mmx24mmx0.45mm) and with slot for fixing including suspended with 2mm dia. GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as specified and as directed by the engineer in charge.

Demolition of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. but not excluding ashlar facing dressed stone work and precast concrete articles.

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc complete.

M&L for 15 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Liquid water proofing compound complete.

M&L for preparation of newly plastered sufaces of walls & applying 2 coat of cement base paint complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.

Material and labour for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying two coat of white wash complete all as specified and directed by Engineer -in-Charge.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 75mm thick PCC (1:2:4) Type C2 using 40mm graded stone agg as in plinth protection surface even and fair without using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and as diected

M&L for machine cut Kota stone slab 18 mm to 22 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing , over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6) complete all as specified and directed.

M&L for machine cut kota stone slab 10mm -15 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed .

Material and labour for machine made ,1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles , 60 mm thick of grade M-35, of any shape or shap and designe as approved, with grey cement and pigment , laid over fixed as in floors/ paths/ pavings etc, complete all as specified and directed.

Excavation in trenches nexc 1.5m wide and nexc 1.5m in depth as in foundation etc as in any type of soil complete.

M& L for cement concrete ( 1:2:4) type B-1 (20mm graded agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed.

Cutting of cracks to V section in existing wall surface, cleaning out, wetting, grouting with cement and sand slurry 1:3 etc complete all as specified and directed.

Demolition of Reinforced Cement concrete of any description and in any position not otherwise specially provided including revomoving debris to a place exe. 1.5km and n. exe. 5km outside MD land as directed

M&L RCC Precast type B-1 (1:2:4) 20 mm graded stone aggregate set in cement motar 1:6 as in cover slab lintel bend etc as in including all forms mould etc complete all as specified and directed.

M&L for reinforced cement concrete nominal mix type B-1 (1:2:4) ( using 20 mm graded stone aggregate ) as in foundations, including rafts, footings, foundation beams , plinth beams , base for coloumns and mass concrete etc. complete all as specified and directed.

M&L for reinforced cement concrete nominal mix B-1 (1:2:4) ( using 20 mm graded stone aggregate ) as in beams , cantilevers bressummers , lintel over 1.5 m span etc. complete all as specified and directed.

M&L for reinforced cement concrete type B-1 (1:2:4) ( using 20 mm graded stone aggregate ) as in slab supported on walls ,beams, coumnns in floor , roof , landing complete all as specified and directed.

M&L for use and waste formwork to sides of concrete foundation , footing, base of coulmn , raft, raft beam sides and soffits of foundation and plinth beam for rough finished surfaces of concrete complete all as specified and directed

M&L use and waste formwork to soffits of suspended slabs such as roof slabs , floor slabs , landings and similar works , not exceeding 200 mm thick ( horizontal or sloping ) including slab edges for rough finished surfaces of concrete complete all as specified and directed

M&L for use and waste Formwork to sides & soffits of floor or roof beam rough finished surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars ,6 mm to 8 mm dia over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

Surface Excavtion n.exc 30 cm deep avg.15cm in Hard /dense type soil and getting out complete all as specified and directed.

Add or deduct above item for every 3 cm or part thereof above or below 15cm average complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting with power roller of capacity exc 8 tonne and n.exc 12 tonne.

M&L moorum /red bajri filling in floors or paving laid in layers n exc 15cm thick spread leveled and rammed including watering complete all as specified and directed by Engineer in charge.

M&L Soiling (or subbase ),150 mm thick (spread thickness ) with crushed or broken lime /sand stone of grading 63 to 90 mm boulders or quarried stone ,interstices filled ,surface formed and rollled and consoildated to requried gradient and camber with 8 to 12 tonne power roller complete all as specified & directed .

M&L for 150 mm thick (compacted thickness) WMM(Wieght mix Macadam) in two layers of each one layer 75mm thick (compacted thickness) with coarse stone aggregate (lime /sand stone) of grading 1 (40 to 63 mm size spread & rolled with 8 to 12 tonne power roller, rolled and consolidated to required gradient and camber all as specified.

M&L PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete complete.

M&L for PCC 100 mm thick (1:2:4) type B-2, (using 40 mm graded stone aggregate) as in floor, finished even and rough complete all as specified and directed.

M&L for forming constrution joint 30 mm deep X 10 mm wide filled with sealing compound of Grade 'B'.

M&L for forming contraction (dummy ) joint 65 mm deep X 10 mm wide filled with sealing compound of Grade 'B'.

Removing excavated soil to a distance not exc 500 m depositing where directed at a level n.exc 1.5m above the starting point.

Excavating in posts holes (or similar holes) in hard/dense soil each n.exc 0.50 cu.m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm watering, and removing surplus soil to a distance n.exc 50m and making good surface.

M&L for preperation of new surface two coat of synthetic enamel paint over coat of Red oxide primer over new surfaces nexc 10 cm width or girth complete all as specified

M&L for pre -cast cement concrete block masonry type C1 1:3:6 (20 mm ) graded set in cement mortar (1:6) with soild blocks exc. 10 cm in width and setting in mortar complete all as specified and directed.

M&L for preparation of undecorated concrete surface of road side kerbs / appex stones and similar items of any description and in any position exceeding 10 cm width or girth and apply two coat of synthetic enamel paint to the strip pattern and of different tint(s) complete all as specified and directed.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete.

One light point controlled by one switch.

One Ceiling Fan/ Exhaust fan point controlled by one switch.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

Description all as per item No 66 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.

S&F switch piano, flush button single pole one way 5 Amp complete all as specified and directed.

S&F socket out let, multipurpose, 2 in 1 5 pin, 5 Amp complete all as specified and directed.

S&F switch piano, flush button single pole one way 15 Amp complete all as specified and directed.

S&F socket out let multipurpose flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed.

S&F electronic step rotary type fan regulator of two module capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.

S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete.

S&F LED Lamp 09/10 watt complete.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.

Supply & fix Exhaust fans 450 mm sweep double bearing with all fixing accessories required including making hole & regd length of 3 core 1.0 sqmm PVC multistranded copper conductor, and testing complete all as specified and directed.

S&F MCB DB, sheet metal enclosures double door SPN 8 way with 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 40 to 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm 2 Core.

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.

Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete.

S&F tube 'Light' grade galvanised Pipe of 50 mm dia with all fitting for cable protection, laid in trenches, fixed to wall and floor by MS shaddle & fixed with pole, 02 position by MS clamp made of 40x5 mm MS flat, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.

Babatia super works

M/s Manish Contractor

M.S. ENGINEERS

M/s Ratan Lal Jain and Co.

RAJ AND BROTHERS

M/S YOGANSH CONSTRUCTION CO.

mahamaya constructions