Cr-Mo-V / Cr-Mo PRESSURE VESSELS

LCF HP/HT Separator Including Erection & Commissioing spares , scope as defined in material requisition but excluding mandatory spares. Cost of mandatory spares to be furnished in 1.01 Tag no-1P30-VV-2631

Mandatory Spares for item no.1.00,LCF HP/HT Separator, Scope as per material requisition.

TRANSPORTATION: (For Item no. 1.00)-LCF HP/HT Separator For Indegenious Bidders : Inland transportation charges by road of all supplies from Vendor’s works / shop to Kolkatta / Haldia Port.Templates and spares to be despatched directly to Project Site, Numaligarh Refinery, Golaghat, Asaam, ( Excluding GST) For Foreign Bidders- Indicate firm ocean freight charges up to Port of entry in India (Kolkatta / Haldia) Templates and spares to be despatched directly to Project Site, Numaligarh Refinery, Golaghat, Asaam India, (Valid till entire duration of Order).

Third Party Inspection charges for item no.1.00, LCF HP/HT Separator

CIF value of Import Content against S.no-1.0, LCF HP/HT Separator (To be quoted by INDIAN BIDDERS ONLY ).

HDT HP/MT Separator including Erection & Commissioing spares , scope as defined in material requisition but excluding mandatory spares. Cost of mandatory spares to be furnished in 2.01 Tag no-1P31-VV-2634

Mandatory Spares for item no.2.00, HDT HP/MT Separator Scope as per material requisition.

TRANSPORTATION: (For Item no. 2.00)-HDT HP/MT Separator For Indegenious Bidders : Inland transportation charges by road of all supplies from Vendor’s works / shop to directly to Project Site, Numaligarh Refinery, Golaghat, Asaam, ( Excluding GST) For Foreign Bidders- Indicate firm ocean freight charges up to Port of entry in India (Kolkatta / Haldia) Templates and spares to be despatched directly to Project Site, Numaligarh Refinery, Golaghat, Asaam India, (Valid till entire duration of Order).

Third Party Inspection charges for item no.2.00,HDT HP/MT Separator

CIF value of Import Content against S.no-2.0,HDT HP/MT Separator (To be quoted by INDIAN BIDDERS ONLY ).

LCF HP/MT Separator Including Erection & Commissioing spares , scope as defined in material requisition but excluding mandatory spares. Cost of mandatory spares to be furnished in 3.01 Tag no-1P30-VV-2731

Mandatory Spares for item no.3.00, LCF HP/MT Separator,Scope as per material requisition.

TRANSPORTATION: (For Item no. 3.00)-LCF HP/MT Separator For Indegenious Bidders : Inland transportation charges by road of all supplies from Vendor’s works / shop to directly to Project Site, Numaligarh Refinery, Golaghat, Asaam, ( Excluding GST) For Foreign Bidders- Indicate firm ocean freight charges up to Port of entry in India (Kolkatta / Haldia) Templates and spares to be despatched directly to Project Site, Numaligarh Refinery, Golaghat, Asaam India, (Valid till entire duration of Order).

Third Party Inspection charges for item no.3.00,LCF HP/MT Separator

CIF value of Import Content against S.no-3.0,LCF HP/MT Separator (To be quoted by INDIAN BIDDERS ONLY ).

HDT HP/LT Separator Including Erection & Commissioing spares , scope as defined in material requisition but excluding mandatory spares. Cost of mandatory spares to be furnished in 4.01 Tag no-1P31-VV-2732

Mandatory Spares for item no.4.00, HDT HP/LT Separator,Scope as per material requisition.

TRANSPORTATION: (For Item no. 4.00)-HDT HP/LT Separator For Indegenious Bidders : Inland transportation charges by road of all supplies from Vendor’s works / shop to directly to Project Site, Numaligarh Refinery, Golaghat, Asaam, ( Excluding GST) For Foreign Bidders- Indicate firm ocean freight charges up to Port of entry in India (Kolkatta / Haldia) Templates and spares to be despatched directly to Project Site, Numaligarh Refinery, Golaghat, Asaam India, (Valid till entire duration of Order).

Third Party Inspection charges for item no.4.00,HDT HP/LT Separator

CIF value of Import Content against S.no-4.0,HDT HP/LT Separator (To be quoted by INDIAN BIDDERS ONLY ).

Description of Work / Item(s)

Two Year Spares for Tag no-1P30-VV-2631 – LCF HP/HT Separator , item Sr No 1.00 (Spare no. - 1.01 (Mention the spare name-Qty-Unit)

Spare no. - 1.02 (Mention the spare name-Qty-Unit)

Spare no. - 1.03

Spare no. - 1.04

Spare no. - 1.05

Spare no. - 1.06

Spare no. - 1.07

Spare no. - 1.08

Spare no. - 1.09

Spare no. - 1.10

2 years Normal operational & maintenance spares (as per vendor recommendation) against , Tag no-1P31-VV-2634 – HDT HP/MT Separator, item Sr No 2.00 (as per vendor recommendation) against , (Spare no. - 2.01 (Mention the spare name-Qty-Unit)

Spare no. - 2.02 (Mention the spare name-Qty-Unit)

Spare no. - 2.03

Spare no. - 2.04

Spare no. - 2.05

Spare no. - 2.06

Spare no. - 2.07

Spare no. - 2.08

Spare no. - 2.09

Spare no. - 2.10

Two Year Spares for Tag no-1P30-VV-2731 – LCF HP/MT Separator (as per vendor recommendation) against , item Sr No 3.00 (Spare no. - 3.01 (Mention the spare name-Qty-Unit)

Spare no. - 3.02 (Mention the spare name-Qty-Unit)

Spare no. - 3.03

Spare no. - 3.04

Spare no. - 3.05

Spare no. - 3.06

Spare no. - 3.07

Spare no. - 3.08

Spare no. - 3.09

Spare no. - 3.10

Two Year Spares for Tag no-1P31-VV-2732 – HDT HP/LT Separator (as per vendor recommendation) against , item Sr No 4.00 (Spare no. - 4.01 (Mention the spare name-Qty-Unit)

Spare no. - 4.02 (Mention the spare name-Qty-Unit)

Spare no. - 4.03

Spare no. - 4.04

Spare no. - 4.05

Spare no. - 4.06

Spare no. - 4.07

Spare no. - 4.08

Spare no. - 4.09

Spare no. - 4.10

Description of Work / Item(s)

Unit Rate per kg for addition of additional clips such as Platform clips, Ladder clips & Pipe support clips (if total weight of such clips exceeds 300 kg for LCF HP/HT Separator (1P30-VV-2631) - Total Weight Sum of Ladder Clips, Pipe Support Clips, Platform support clips, less than 300 kg shall NOT be considered for this line item ; Clip with pad materials : SA 516 Gr.65N / 70N Unit rate shall include mechanical design + fabrication + Supply Insulation clips, Fire-proofing clips shall NOT be considered for this line item ( These shall be included in main supply )

Unit Rate per kg for addition of additional clips such as Platform clips, Ladder clips & Pipe support clips (if total weight of such clips exceeds 300 kg for HDT HP/MT Separator 1P31-VV-2634 - Total Weight Sum of Ladder Clips, Pipe Support Clips, Platform support clips, less than 200 kg shall NOT be considered for this line item ; Clip with pad materials : SA 516 Gr. 70N Unit rate shall include mechanical design + fabrication + Supply Insulation clips, Fire-proofing clips shall NOT be considered for this line item ( These shall be included in main supply )

Unit Rate per kg for addition of additional clips such as Platform clips, Ladder clips & Pipe support clips (if total weight of such clips exceeds 300 kg for LCF HP/MT Separator 1P30-VV-2731 - Total Weight Sum of Ladder Clips, Pipe Support Clips, Platform support clips, less than 200 kg shall NOT be considered for this line item ; Clip with pad materials : SA 516 Gr. 70N Unit rate shall include mechanical design + fabrication + Supply Insulation clips, Fire-proofing clips shall NOT be considered for this line item ( These shall be included in main supply )

Unit Rate per kg for addition of additional clips such as Platform clips, Ladder clips & Pipe support clips (if total weight of such clips exceeds 300 kg for HDT HP/LT Separator 1P31-VV-2732 - Total Weight Sum of Ladder Clips, Pipe Support Clips, Platform support clips, less than 750 kg shall NOT be considered for this line item ; Clip with pad materials : SA 516 Gr.60N / 70N Unit rate shall include mechanical design + fabrication + Supply Insulation clips, Fire-proofing clips shall NOT be considered for this line item ( These shall be included in main supply )

Unit Rate for reduction or increase per kg for lower Skirt / Saddle support. This line item shall NOT be considered in case of no change on the skirt length / sadde height as specified in respective mechanical datasheet for Vessels. Skirt / Saddle support material - SA 516 Gr 70N Unit rate shall include mechanical design + fabrication + Supply

Unit rate for addition / deletion of lip type SRN nozzle with Flange for each size: #2500 ASME B 16.5 and ASME B16.47 Series A (Lip type SR with flange + SS Ring Joint Gasket + Stud Bolting) for 2 ¼ Cr-1Mo- ¼ V + SS 347 weldoverlay materials. Refer MR, For specific grade of the above Cr-Mo-V materials, nozzle projection and other details. SIZE- 2" ID #2500 LIP TYPE SR LWN RTJ

3" ID #2500 LIP TYPE SR LWN RTJ

4" ID #2500 LIP TYPE SR LWN RTJ

5" ID #2500 LIP TYPE SR LWN RTJ

6" ID #2500 LIP TYPE SR LWN RTJ

8" ID #2500 LIP TYPE SR LWN RTJ

10" ID #2500 LIP TYPE SR LWN RTJ

12" ID #2500 LIP TYPE SR LWN RTJ

14" ID #2500 LIP TYPE SR LWN RTJ

16" ID #2500 LIP TYPE SR LWN RTJ

18" ID #2500 LIP TYPE SR LWN RTJ

20" ID #2500 LIP TYPE SR LWN RTJ

22" ID #2500 LIP TYPE SR LWN RTJ

24" ID #2500 LIP TYPE SR LWN RTJ

26" ID #2500 LIP TYPE SR LWN RTJ ( Flanges as per ASME B 16.47 series A )

26" ID #2500 LIP TYPE SR LWN RTJ ( Flanges as per ASME B 16.47 series A )

28" ID #2500 LIP TYPE SR LWN RTJ ( Flanges as per ASME B 16.47 series A )

30" ID #2500 LIP TYPE SR LWN RTJ ( Flanges as per ASME B 16.47 series A )

32" ID #2500 LIP TYPE SR LWN RTJ ( Flanges as per ASME B 16.47 series A )

34" ID #2500 LIP TYPE SR LWN RTJ ( Flanges as per ASME B 16.47 series A )

36" ID #2500 LIP TYPE SR LWN RTJ ( Flanges as per ASME B 16.47 series A )

40" ID #2500 LIP TYPE SR LWN RTJ ( Flanges as per ASME B 16.47 series A )

Unit rate for addition / deletion of lip type SRN nozzle with Flange for each size: #1500 ASME B 16.5 and ASME B16.47 Series A (Lip type SR Nozzle + SS Ring Joint Gasket + Stud Bolting) for Carbon steel + SS 304L weldoverlay materials. Refer MR, For specific grade of the above Carbon steel materials, nozzle projection and other details. SIZE-2" #1500 LIP TYPE SR WN RTJ

3" #1500 LIP TYPE SR WN RTJ

4" #1500 LIP TYPE SR WN RTJ

5" #1500 LIP TYPE SR WN RTJ

6" #1500 LIP TYPE SR WN RTJ

8" #1500 LIP TYPE SR WN RTJ

10" #1500 LIP TYPE SR WN RTJ

12" #1500 LIP TYPE SR WN RTJ

14" #1500 LIP TYPE SR WN RTJ

16" #1500 LIP TYPE SR WN RTJ

18" #1500 LIP TYPE SR WN RTJ

20" #1500 LIP TYPE SR WN RTJ

22" #1500 LIP TYPE SR WN RTJ

24" #1500 LIP TYPE SR WN RTJ

26"#1500 LIP TYPE SR WN RTJ ( Flanges as per ASME B 16.47 series A )

28"#1500 LIP TYPE SR WN RTJ ( Flanges as per ASME B 16.47 series A )

30"#1500 LIP TYPE SR WN RTJ ( Flanges as per ASME B 16.47 series A )

32"#1500 LIP TYPE SR WN RTJ ( Flanges as per ASME B 16.47 series A )

34"#1500 LIP TYPE SR WN RTJ ( Flanges as per ASME B 16.47 series A )

36"#1500 LIP TYPE SR WN RTJ ( Flanges as per ASME B 16.47 series A )

40"#1500 LIP TYPE SR WN RTJ ( Flanges as per ASME B 16.47 series A )

Unit rate per meter for addition / deletion of nozzle pipe. This line item shall NOT be considered in case of no change on the pipe length as specified in respective mechanical datasheet for Vessels. Pipe material - Solid SS 347 (Refer MR, for specific grade of pipe material) Unit rate shall include mechanical design (to suit respective reactor mechanical design conditions) + fabrication + Supply SIZE-2" NB

Unit rate per meter for addition / deletion of nozzle pipe. This line item shall NOT be considered in case of no change on the pipe length as specified in respective mechanical datasheet for Vessels. Pipe material - Solid SS 321 (Refer MR, for specific grade of pipe material) Unit rate shall include mechanical design (to suit respective reactor mechanical design conditions) + fabrication + Supply SIZE-2" NB

Unit rate for addition / deletion of WN Flange for each size: #2500 ASME B 16.5. This line item shall NOT be considered in case of no change on the Flange size as specified in respective mechanical datasheet for Vessels. Flange material - SS 321 (Refer MR, for specific grade of flange material) 2" #2500 WNRTJ

3" #2500 WNRTJ

4" #2500 WNRTJ

5" #2500 WNRTJ

6" #2500 WNRTJ

8" #2500 WNRTJ

10" #2500 WNRTJ

12" #2500 WNRTJ

14" #2500 WNRTJ

16" #2500 WNRTJ

18" #2500 WNRTJ

20" #2500 WNRTJ

22" #2500 WNRTJ

24" #2500 WNRTJ

26" #2500 WNRTJ

28" #2500 WNRTJ

30" #2500 WNRTJ

32" #2500 WNRTJ

Unit rate for addition / deletion for Nozzles with Grayloc clamped connectors (pairs of clamps with Seal Ring + stud bolting) for each size: Grayloc clamped connectors to suit mechanical design condition (as shown on respective mechanical datasheet) for 2 ¼ Cr-1Mo- ¼ V + E-309L/E-347 WO materials. Refer MR, For specific grade of the above Cr-Mo-V materials and other details. SIZE-2" Nozzle with Grayloc Clamped connector

3" Nozzle with Grayloc Clamped connector

4" Nozzle with Grayloc Clamped connector

5" Nozzle with Grayloc Clamped connector

6" Nozzle with Grayloc Clamped connector

8" Nozzle with Grayloc Clamped connector

10" Nozzle with Grayloc Clamped connector

12" Nozzle with Grayloc Clamped connector

14" Nozzle with Grayloc Clamped connector

16" Nozzle with Grayloc Clamped connector

18" Nozzle with Grayloc Clamped connector

20" Nozzle with Grayloc Clamped connector

22" Nozzle with Grayloc Clamped connector

24" Nozzle with Grayloc Clamped connector

26" Nozzle with Grayloc Clamped connector

28" Nozzle with Grayloc Clamped connector

30" Nozzle with Grayloc Clamped connector

32" Nozzle with Grayloc Clamped connector

34" Nozzle with Grayloc Clamped connector

36" Nozzle with Grayloc Clamped connector

40" Nozzle with Grayloc Clamped connector

Unit rate for addition / deletion for SS 347 solid alloy Grayloc mating fitting for each size: Grayloc clamped connectors to suit mechanical design condition (as shown on respective mechanical datasheet) for 2 ¼ Cr-1Mo- ¼ V + E-309L/E-347 WO materials. Refer MR, For specific grade of the above SS 347 materials and other details. SIZE-2" Solid SS alloy Grayloc mating fitting

3" Solid SS alloy Grayloc mating fitting

4" Solid SS alloy Grayloc mating fitting

5" Solid SS alloy Grayloc mating fitting

6" Solid SS alloy Grayloc mating fitting

8" Solid SS alloy Grayloc mating fitting

Unit rate for addition / deletion for 2 ¼ Cr-1Mo- ¼ V + E-309L/E-347 WO materials Grayloc mating fitting for each size: Grayloc clamped connectors to suit mechanical design condition (as shown on respective mechanical datasheet) for 2 ¼ Cr-1Mo- ¼ V + E-309L/E-347 WO materials. Refer MR, For specific grade of the above 2 ¼ Cr-1Mo- ¼ V materials and other details. SIZE-10" Grayloc mating fitting

12" Grayloc mating fitting

14" Grayloc mating fitting

16" Grayloc mating fitting

18" Grayloc mating fitting

20" Grayloc mating fitting

22" Grayloc mating fitting

24" Grayloc mating fitting

26" Grayloc mating fitting

28" Grayloc mating fitting

30" Grayloc mating fitting

32" Grayloc mating fitting

34" Grayloc mating fitting

36" Grayloc mating fitting

40" Grayloc mating fitting

Unit rate per kg for addition / deletion for finished weight of forged 2 ¼ Cr-1Mo- ¼ V + E-309L/E-347 WO materials. This is applicable for all forged nozzles and other forged components.

Unit rate per kg for addition / deletion for finished weight of forged 2 ¼ Cr-1Mo- ¼ V + SS 347 WO materials. This is applicable for all forged nozzles and other forged components.

Unit rate per kg for addition / deletion for finished weight of forged SS 347 materials. This is applicable for all forged nozzles and other forged components such as forged pipe, forged fitting etc.

Unit rate per kg for addition / deletion for finished weight of forged SS 321 materials. This is applicable for all forged nozzles and other forged components such as forged pipe, forged fitting etc.

Unit rate per kg for addition / deletion for finished weight of forged (Carbon steel + SS 304L ) NACE materials. This is applicable for all forged nozzles and other forged components

Unit rate per kg for addition / deletion of supports welded on external surface of Vessels. This line item shall NOT be considered in case of no change on the external supports as specified in MR for Vessels. Support materials - SA 542 Gr D Cl. 4a Unit rate shall include mechanical design + fabrication + Supply

Unit rate per kg for addition / deletion of supports welded on external surface of Vessels. This line item shall NOT be considered in case of no change on the external supports as specified in MR for Vessels. Support materials - SA 516 Gr 60N Unit rate shall include mechanical design + fabrication + Supply

Unit rate per kg for addition / deletion of supports welded on Internal surface of Vessels. This line item shall NOT be considered in case of no change on the internal supports as specified in MR for Vessels. Support materials - SA 240 TP 347 Unit rate shall include mechanical design + fabrication + Supply

Unit rate per kg for addition / deletion of supports welded on Internal surface of Vessels. This line item shall NOT be considered in case of no change on the internal supports as specified in MR for Vessels. Support materials - SA 240 TP 304L + NACE Unit rate shall include mechanical design + fabrication + Supply

Unit rate per kg for addition / deletion of supports welded on external surface of Vessels. This line item shall NOT be considered in case of no change on the external supports as specified in MR for Vessels. Support materials - SA 387 Gr 22 Cl. 2 Unit rate shall include mechanical design + fabrication + Supply

Larsen & Toubro Limited

Larsen & Toubro Limited

Isgec Hitachi Zosen Ltd

US Dollar

European Euro

British Pound

Japanese yen

Singapore Dollar

US Dollar

European Euro

British Pound

Japanese yen

Singapore Dollar