Providing illumination facility to the road leading to Sun Temple and Facade illumination at Martand, Mattan Anantnag.

Amount

Supply, installation, testing and comm. of 12.5 Mtr. Long high mast ( polygonal) shaft totally hot dip galvanised ( 85 microns conforming to IS 2629) through single dipping process and suitable for wind velocity of 180 Km/hour as per IS-875 ( part-III) . The one section mast shaft shall have door opening of adequate size at base having ante vandal type locking arrangement and door construction. it should also include acessories for 12.5 Mtr. high mast including head frame for mounting the luminaire, steel wire rope 5 mm dia ( 7x19 construction) with safety factor not less than 5, drum winch, galvanized lantern carriage way suitable for carrying 8 No's flood lights and its control box ( excluding cost of lights and gear box) the mast should be provided with foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. the mast shall have an internal type power tool ( motor) mounted at the base compartment for its raising and lowering operation, complete with its operating mechanism. Bajaj/ crompton/Valmount/Eq. standard make.

Supply installation testing and comm. of Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium non integral IP66 flood light, suitable for high mast application, 300 W with high power LED's as light source (JETA VALOURFL300WLED757MODNBLT G) including control Gear Box (ASSEMBLEDCGBOXVALOUR300WAP) Havell ( JETA Valour)/Crompton/ Philips/Eq. Standard make .

Construction of suitable foundation for high mast considering the safe soil bearing capacity at site as per the design supplied with the mast with all materials ( steel, cement concreting etc.) and labour. cast insitu M 20 mixture n/s of agg. 20mm and min cement content of 300 Kg/m3 incld. cost of excavation , soling ( well compacted, consolidated, handpacked) inclusive of mudmat lean M 7.5 1:4:8 mix with n/s of agg. 40 m3 incld. cost of reinforcement Fe 500,cutting, bendings, straightening and cost of binding wire incld. cost of shuttering, curring, carriage of material ( all laps of reinforcement , ( concrete work & reinforcement detailing as per IS -456 latest and SP-16 & IS-13893)( complete Job.) Errection of mast with the help of suitable equipment. provision of GI pipe earthing for high mast with 2.5 Mt. long 40 mm dia GI pipe including connection of high mast earth terminal with 25x3mm GI flats with all materials and labour.

Providing of earthing using G.I plate earthing ( 2'x2') and G.I strip risers along with associated material as per I.S standards to the high mast.

Supply installation testing and comm. of 7 Mt. octagonal M.S pole designed as per ILE TR7 and BS5649 for structrual design & as per IS 875 ( part III) 1987 for dynamic loading. M.S sheet thickness: 3mm Galvanization thickness 65 microns ( min) Door size:250mmx65mm, along with 4 No. foundation bolts Valmount/ bajaj/crompton/ eq. standard make.

Providing of cement concrete block with dimensions( 2'x2'x4.5') including grouting 4 no foundation bolts, cement concrete to be carried in 1:2:4 mix.( RCC) including cost of M.S reinforcement ( as per approved drawing ) and cost of shuttering.

Supply and installation of 1'' dia 5' long G.I. Earthing electrode including clamps and connecting the electrode to the junction box on the pole through 10 swg GI wire after driving in the electrode up to a depth of 6' in the ground from the base of the pole.

Supply installation testing and comm.of single overhang Bracket made of 48.3 mm OD GI pipe length 5 Mt. philips/ bajaj/crompton/ eq. standard make. (as per approved sample)

Supply installation testing and comm.of double overhang Bracket made of 48.3 mm OD GI pipe length 5 Mt. philips/ bajaj/crompton/ eq. standard make. (as per approved sample)

Supply installation testing and comm. of Street lighting luminaire 120 W LED environmental friendly long life versatile pressure die-cast aluminium IP66 with high power LED as light source Havell ( Endurra Cityliner NEO)/ Philips/ Crompton/ Eq. Standard make.

Supply and fixing of four arm bracket ( square/circular type 2.5'x2.5') for mounting the luminaire on the top of the pole fabricated out of 75 mm diameter M.S. pipe welded and supported with a triangular MS gasset plate 6mm thick , with a provision of cast iron cap.

Supply installation testing and comm. of die cast aluminium IP65 flood light 150 W with high power LED's as light source Street lighting luminaire Philips/ Havell ( JETA NEO)/Crompton/ Eq. Standard make

Providing and fixing of Al.thimble 10 mm sq. to 50 mm sq. including its crimping , taping etc.

Providing of service connection and earthings to luminaire from the junction box in 1.5 mm PVC insulated, multicore copper wire .

S/L , testing and commissioning of PVC alluminium armoured/unarmoured cable 1100 volt grade Al. armoured cable Havell/Eq. standard make

a) 10 sq.mm 4 core(un-armoured)

b) 25 sq.mm 4 core(un-armoured)

c) 50 sq. mm 4 core(armoured)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Carrying out foundation of PCC type, cement concrete to be carried in 1:2:4 mix the length and breadth of the foundation shall be 300 mm more from the respective length and breadth of the servostabilizers( 8'x5'). The hight of the foundation shall be 400 mm I.e 200 mm below and 300 mm above the ground level. the job also includes supply and carriage etc of the requsite material upto the site.

Supply installation testing and comm. Of main control pannel double door( 4'x3'x1'6") sheet steel 16 SWG powder coated phosphatised fitted with following accessories Legrand/Havells make MCB'S , and shall have angle iron stand to be grouted in the cement concrete.

a) 400 amp 4 strip bus 2 No.

c) 160 amp MCCB 35 K 4 pole 1 No.

d)space for 12 way MCB'S

e) Astronomical Timer switch and contactor of required capicity

Supply installation testing and comm. Of main control pannel double door( 3'x2'x1'6") sheet steel 16 SWG powder coated phosphatised fitted with following accessories Legrand/Havells make MCB'S , and shall have angle iron stand to be grouted in the cement concrete.

a) 400 amp 4 strip bus 1 No.

c) 100 amp MCCB 35 K 4 pole 1 No.

d)space for 12 way MCB'S

e) Astronomical Timer switch and contactor of required capicity

Supply and errection of 9.0 mt long(410SP-33) steel tubular poles, sawaged type conforming to IS-2713, (Part-II) ,planting depth 1.5 mt .Pole shall have 2 no bolts welded at a distance of 3 mt. from bottom of pole and suitable holes shall be drilled in pole for service connection and lum. earth wires.

Digging of suitable pole pit to errect pole in it having planting depth of 1.5 mts. & Providing of cement concrete block up to G.L. and Concrete jacketing above G.L. in 1:2:4 cement concrete.

Providing and fixing of channel iron X- arms 8' long to be fabricated out of 100x50x6mm channel iron with provision of holes of suitable size M.S. semi round clamp and nut and bolts. The X-arms shall be used for fixing of pin insulators, link set, DO fuse set, lighting arrestor, take off point, also for supporting of transformer etc. the job also includes two coats of red oxide and one coat of matellic paint.

Providing and fixing of channel iron X- arms 8' long to be fabricated out of 75x40x6mm channel iron with provision of holes of suitable size M.S. semi round clamp and nut and bolts. The X-arms shall be used for fixing of pin insulators, link set, DO fuse set, lighting arrestor, take off point, also for supporting of transformer etc. the job also includes two coats of red oxide and one coat of matellic paint.

Supply , fixing testing and commissioning of 11 KV 400 A Gang operated Switch ( link set) CPRI approved on the channel iron X- arms, and copper link, complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping points of 11KV lines and shall comply with the indian standard specification IS:2544,IS:5340 ( Part-iii) and IS :9921 ( part I -V)with all allied accessories. ( Complete job)

Supply , fixing testing and commissioning of 11 KV D.O.fuse set on the channel iron X- arms.

Supply , fixing testing and commissioning of 11 KV L.A. Set station type on the channel iron X- arms broad base type standard make

S/I , testing and commissioning of an out door type energy efficient ( Level 2) 63 KVA, Al. wound ,3-phase, oil cooled, 50 Hz,11/0.44 KV distribution transformer provided with tap changer, silcagel breather, conservator tank, oil gauge. North suns/Zain make.the job also includes mechanical/ manual carriage upto the site.

Providing of earthing using G.I plate earthing and G.I strip risers along with associated material as per I.S standards for Transformer body,Neutral and L.A set.( Pit to be dug in rocky land)

S/I testing and comm. Of three phase 15 KVA 50HZ oil cooled(Transformer oil is to be provided with stabilizer conforming to IS 335,IEC296)) servo voltage stabilizer(Electricfield / A.E/COSCO/Equivalent make) having an input line voltage ranging from 90V to 270 V ( phase voltage) and balanced output voltage of 220V, +/- 1%. ( Test certificate to be provided by the manufacturer) The unit incorporate

e) Single phase Preventer , time delay of 10 Secs, low cut and high cut.

h) 20 % over load bearing capacity for one hour.

P/F of sheet steel Kiosk suitable to house 15 KVA servo stabilizer fabricated out of 16 SWG M.S sheet having front door with locking arrangements and duly powder coated.

Supply installation testing and comm.of 35 mm Sq. ABC Cable 11KV grade standard make including cable Hook.

Supply fixing testing and commissioning of 11 KV cable kit standard make.

Supply fixing testing and comm.of baklite cable connector 63 amp.

Supply installation testing and commissioning of LED fascade light 300watt ( Skyline 300 Watt warm white) including its accessories viz,M15 female supply cable 1M 3 pin,M 15 extension cable 3 Mt. 3 pin,3 pin plug socket connector IP 67,3 pin T Type plug socket connector IP 67. Havell/ philips make.( complete job)

Supply installation testing and commissioning of DMX controller( UE 7) including address writer,DMX spilleter 8 way,instruction forwader ranger/ compass(AC), Amplifier Driver IP 67 24V 18W (LPH-18-24) 2 pin plug socket JRL IP connector IP 67, IP Box for DMX controller, IP Box for DMX splleter,XRL cable male connector with cable one side open wire, XRL cable-male female connector connected with cable.

TZ Engineering Works

M/S ZAHOOR AHMAD BHAT

MIR TRADERS

ESS ESS ELECTRICALS AND MECH WORKS

BHAT ENGINEERS

SHABIR HUSSAIN LONE

N S ENTERPRISES

ZK Enterprises (Prop Zahoor Ahmad Khan)

M/S SHAKEEL RAJA

ZEESHAN ELECTRICAL AND CONTRACTORS

Escon Electricals

M/S J.MAT ASSOCIATES

LATEEF ELECTRICALS