REPAIR AND POLISHING OF WOODEN FURNITURE OF OTM AND MD ACCN UNDER BSO OF GE (NORTH) UDHAMPUR

Amount

SOFA SET 5 SEATER Taking down old unserviceable cushions of seat and back of sofa set 5 seater and supply and fixing approved quality 100 mm thick 40 density foam cushions for seat and 50 mm thick 40 density foam cushioned for back duly covered with velvet/tapestry cloth not less than Rs.450/- per metre for seat and back of sofa set five seat consisting of three pieces viz one three seater and two single seat for seat and back. The size and shape of seat and back shall be as per existing sofa /drg. Make of foam shall be Sleepwell/Kurlon/Featherfoam(top brand/model) complete all as specifed in Drg No FD-258 and directed by Engr -in- Charge.

Applying two coat of french polish on the Sofa Set five seater after preparing the old surface and making smooth surfaces by rubbing with suitable emery paper complete all as speified and as directed by Engineer-in-Charge. FD 258

Supplying and fixing new foam cushions 40 density of size 22 "X 21" x4" inch, Make:- Sleepwell/Kurlon/Featherfoam( Top Brand and Top Model) duly covered with velvet/tapestry cloth not less than Rs.450/- per metre complete all as specified and shown on drg FD-281 and directed by Engr - in -Charge.

Taking down old unserviceable cover of seat and back of sofa set and supplying and fixing new covers with velvet/tapestry cloth not less than Rs.450/- per metre complete all as specified and shown on drg FD-281 and directed Engr - in -Charge.

Applying one coat of french polish on the Sofa Set five seater after preparing the old surface and making smooth surfaces by rubbing with suitable emery paper complete all as speified and as directed by Engineer-in-Charge. FD-281

Applying two coat of french polish on the Sofa Set four seater after preparing the old surface and making smooth surfaces by rubbing with suitable emery paper complete all as speified and as directed by Engineer-in-Charge. FD-281.

CHAIR WRITING Removing of unservicebale front legs from chair writing. S & F of new approved quality seasoned teak wood new gets to match other legs as per existing pattern complete all as per FD 250 drgs/specifiction and as directed by Engr-in-Charge.

All as per item No 7 above but rear legs.FD 250

All as per item No 7 above but front/back/side rails of seat FD 250

All as per item No 7 above but stiffner FD 250

All as per item No 7 above but arms FD 250

Applying one coat of french polish on the chair writing after preparing the old surface and making smooth surfaces by rubbing with suitable emery paper complete all as speified and as directed by Engineer-in-Charge. FD 250

CHAIR DINING Removing of unserviceable front leg from chairs dinning and S & F of new approved quality seasoned teak wood leg including polishing of new legs to match other legs as per existing design, pattern complete all as per drgs FD -279 specification and as directed by Engr-in-Charge.

All as per item No 13 above but rear legs.FD 279

All as per item No 13 above but front/back/side rails of seat FD 279

All as per item No.13 here in before but back rest batten. FD 279

All as per item No.13 here in before but stiffner. FD 279

All as per item No.13 here in before But supply and Fix nylon buffer at bottom of all legs FD-279

Applying one coat of french polish on the chair Dinning after preparing the old surface and making smooth surfaces by rubbing with suitable emery paper complete all as speified and as directed by Engineer-in-Charge. FD 279

CHAIR EASY Removing of unserviceable front leg from chair easy and S & F of new approved quality seasoned teak wood leg including polishing of new leg to match other legs as per existing design, pattern complete all as per drgs/ specification and as directed by Engr-in-Charge. FD 229

All as per item No.20 here in before but rear leg FD 229

All as per item No.20 here in before but front/ back/side rail of seat and back. FD 229

All as per item No.20 here in before but supply and Fix nylon buffer at bottom of all legs FD 230

All as per item No.20 here in before but arm FD 229

Apply two coat French polich on the chair Easy after preparing the old surface and making smooth surfaces by rubbing with suitbale emery paper complete all as specified and as directed by Engr-in-Charge.

CANNING OF CHAIR WOODEN OF ALL TYPES Removing of old unserviceable cane from all type of woodoen chairs, and supply and fixing new approved quality (as approved by the GE) white plastic cane 2mm wide semi round and weaving the same in Godrej pattern. Canning holes shall be covered with 4mm wide semi round white plastic cane complete all as shown on drgs and directed by Engineer-in-Charge. FD 250, 280, 16, 228, 279, 285, 229 (Make : Shah/Premium/Arihant)

TABLE WOODEN VARIOUS SIZES Removing of old unserviceable leg from table 3'x2' with and without drawers and supply and fixing of new table leg as per existing size / shape / pattern, made out of first class well seasoned teak wood including polishing to match the other parts, Complete all as specified and as directed.FD283, 284, 223

All as per item No.27 here in before but for table 3' x 3', complete all as specified.FD291

All as per item No.27 here in before but for table writing, complete all as specified. FD275

All as per item No.27 above but table dinning six persons, complete all as specified. FD273

All as per item No.27 above but table dinning eight persons, complete all as specified. FD 273

All as per item No.27 here in before but for table centre, complete all as specified on Drg

All as per item No.27 here in before but for Teapoy wooden, complete all as specified. FD278

All as per item No.27 here in before but for peg table, complete all as specified.FD277 alongwith nylon buffer provide at bottom of each legs.

Removing of old unserviceable rear/front rail from table 3'x2' with and without drawers and supply and fixing of new table rail approved quality as per existing size/shape/pattern, made out of first class well seasoned teak wood FD 283 284 223

All as per item ser No 35 above but table 3'x3' complete all as specifed FD 291

All as per item ser No 35 above but table dining 6 pers all as specifed FD 273

All as per item ser No 35 above but table dining 8 pers all as specified FD 273

All as per item ser No 35 above but table centre complete all as specified. FD 274

All as per item ser No 35 above but peg table complete all as specified. FD 277

All as per item ser No 35 above but table writing complete all as specified. FD 275

All as per item ser No 35 above teapoy wooden complete all as specified. FD 278

All as per item ser No 35 above but side rails of table 3'x2' complete all as specified. FD 283

All as per item ser No 35 above but side rail of table writing complete all as specified. FD 275

All as per item ser No 35 above but side rail of table dining 6 pers all as specifed FD 273

All as per item ser No 35 above but side rail of table dining 8 pers all as specified FD 273

All as per item ser No 35 above but side rail of table centre complete all as specified. FD 274

All as per item ser No 35 above but side rail of teapoy wooden complete and all as specified FD 278

All as per item ser No 35 above but side rail of peg table complete all as specified. FD 277

All as per item ser No 35 above but side rails of table 3'x3' complete all as specified. FD 291

All as per item ser No 35 above but supply and fix nylon buffer of appropriate size all as specified. FD 291

Note :- In additional to existing drawings FD-291,FD-284,FD- 273,FD-283 & FD-278 04 Nos of corners of size 100mmx100mmx35mm made up of 1st class teak wood shall be provided and fixed between corner of legs and rails for extra strength at no extra cost. All fittings/material shall be as approved by GE/Engr-in-charge.

All as per item ser No 35 above but stiffner of table 3'x2' / writing, complete and all as specified FD 284 FD 275

Replacing of old UNSV table top of 3'x2' providing new table made out of prelaminated MDF board (one side decorative)exterior grade BWR with 4mm teak wood edging of all round of top of table complete all as specifed and as shown on drg FD 283, 284, 223. Make : Archidply/Greenply/Centuryply(top brand/model).

All as per item ser No 53 above but top of table 3'x3' complete and all as specified. FD 291

All as per item ser No 53 above top of table writing complete and all as specified FD 275

All as per item ser No 53 above but table dining 6 pers all as specifed FD 273

All as per item ser No 53 above but table dining 8 pers all as specified FD 273

All as per item ser No 53 above but teapoy wooden complete and all as specified FD 278

All as per item ser No 53 above but top peg table complete all as specified. FD 277

All as per item ser No 53 above but top of table Centre complete all as specified. FD-277

HAT STAND Removing old unserviceable broken looking mirror from Hat stand and Supply and fixing new approved quality 5 to 6mm thick (plus/minus 5 % tolerance) electro copper plated sheet glass mirror of size 440 x 300mm of make Modi / Atul / Saint Gobain, duly fixed with wooden frame made of teak wood and 6mm thick commericial ply wood including applying two coats of French polish after preparation of surface complete all as specified and as shown on drgs and directed. FD 233

Removing of old unserviceable broken brass pegs from hat stand and supply and fixing of new approved quality (as approved by the GE) 120mm long brass pegs complete all as specified and shown on drgs and as directed.FD233

DRESSING TABLE LADIES Removing old unserviceable broken looking mirror from table dressing ladies and S&F new approved quality 5 to 6mm thick(plus/minus 5 % tolerance) electro copper plated sheet glass mirror of size 1220 x 365mm of make Modi / Atul / Saint Gobain, duly fixed to existing wooden frame and 6mm thick commercial ply wood including applying two coats of French polish after preparation of surface complete all as specified and shown on drgs and directed by Engr- in -charge.FD251

Removing old unserviceable broken glass shutter from ladies dressing table and Supply and fixing of new approved quality 5mm thick glass shutter of size 300x290mm of make Modi / Atul / Saint Gobain, complete all as specified and as shown on drgs FD-251 and directed.

Removing of Unsv knob from drawer of Table dressing Ladies and S&F of Brass knobs 35/38MM of superior quality (as approved by GE) FD-251

Apply two coat French polish on the Dressiing Table Ladies after preparing the old surface and making smooth surfaces by rubbing with suitbale emery paper complete all as specified and as directed by Engr-in-Charge. FD-251

DRESSING TABLE GENTS Removing of old unserviceable broken looking mirror from table dressing gents and Supply and fixing new approved quality 5 to 6mm thick (Plus/minus 5% tolerence) electro copper plated sheet glass mirror of size 760x360mm of make Modi / Atul / Saint Gobain, to be fixed in existing wooden frame and 6mm thick commercial ply wood including applying two coats of French polish after preparation of surface complete all as specified and as shown on drgs and directed.FD-230

POLISHING Polishing to table 3'x2', wooden complete all wooden surface exposed in view with two coats of french polish after smoothing the surface with emery paper and filling holes/cracks with putty properly complete all as specified and as directed.FD223, 283, 285

All as per item No.68 here in before but for table dinning eight persons, complete all as specified. FD273

All as per item No.68 here in before but for table dinning six persons, complete all as specified. FD273

All as per item No.68 here in before but for table 3' x 3', complete all as specified. FD291

All as per item No.68 here in before but for table writing, complete all as specified. FD275

All as per item No.68 here in before but for table centre, complete all as specified.FD274

All as per item No.68 here in before but for Teapoy wooden, complete all as specified. FD278

All as per item No.68 here in before but for table dressing gents. FD230

All as per item No.68 here in before but for hat stand FD-233

All as per item No.68 here in before but for peg table FD-277

All as per item No.68 here in before but for Side Board FD-241/1112

All as per item No.68 here in before but for Almirah Mess Utensil FD-93(M)

All as per item No.68 here in before but for Table Bed side FD-276

TRESTLE STORE ROOM Removing of old UNSV broken long battens after taking down from trestle store room wooden and supply and fixing of top battens of size 2440mm x 10cm x 10 cm made of well seasoned shesham wood. The fixing shall be done with standard workmanship. The edges shall be rounded with file/abrasive paper, complete all as specified and as directed by Engr-in-charge

All as per item No.81 here in before but for centre battens (stiffners) of size 2040mmx6cmx10cm FD 86(M)

All as per item No.81 here in before but for shorts battens (stiffners) of size 600mmx6cmx10cm FD 86(M)

All as per item No.81 here in before but for legs of size 405mmx10cmx10cm FD 86(M)

Use creosote oil two coat internally /externally on trestle store room rest all as specified and directed by engr in charge FD 86(M)

BED PLYWOOD TOP (FD-246) Taking out unserviceable ply wood top from bed ply wood and supply and fixing new ply wood top of 12mm thick BWR grade ISI marked(Make of plywood- Century/Greenply/Archidply Kitlply) top brand/model) to cover the bed from head rest to foot rest fully without any joint. Finishing shall be done in accordance with standard workmanship. Rest all as per drgs specified in particular specifications and as directed by Engr-in-Charge. FD-246

Removing broken long rail of bed plywood top and S & F of new long rail made of Ist class teakwood as match with existing long rail of bed.Rest all as specified and directed by Engr-in-charge. FD-246

Removing broken stiffeners of bed plywood top and S & F of new stiffeners made of Ist class teakwood as match with existing stiffeners of bed.Rest all as specified and directed by Engr-in-charge. FD-246

Removing broken headrest of bed plywood top and S & F of new headrest made of Ist class teakwood and as specified in drg as match with existing headrest of bed.Rest all as specified and directed by Engr-in-charge. FD-246

Removing broken Footrest of bed plywood top and S & F of new Footrest made of Ist class teakwood and as specified in drg as match with existing Footrest of bed.Rest all as specified and directed by Engr-in-charge. FD-246

Applying two coat of french polish on the Bed ply top wooden after preparing the old surface and making smooth surfaces by rubbing with suitable emery paper complete all as speified and as directed by Engineer-in-Charge. FD-246

NOTE: In the BOQ, reference to furniture drawings has been mentioned with alphabets "FD" followed by number relevant to the article mentioned, the same signifies this fact only. Incase, reference to furniture drawing is missing or erroneous, the work shall be executed as directed by the Engineer in Charge and no claim of the contractor on account of any misunderstanding on this aspect shall be admissible.

VEE KAY IND (BID ID -3296417)

TULSI RAINA AND SONS (BID ID -3301063)

DEV RAJ MAGOTRA (BID ID -3300763)

shivom builders (BID ID -3295924)

M/S SHARMA TRADERS (BID ID -3296166)

R K BUILDERS (BID ID -3295988)