Renovation of subordinate rest house at Ganguwal.

Amount

Cvil work

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. a) Doors of area 3 sqm and below. [As per CSR-2020 item No.8.26-a]

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. a) Clerestory windows of area 3 sqm and below. [As per CSR-2020 item No.8.26-c]

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth. [As per CSR-2020 item No.11.3-i]

Scrapping (c) cement plaster. [As per CSR-2020 item No.8.31-c]

Racking of joints in lime or cement, mortar and preparing the surface for repointing or re-plastering including disposal of rubbish to the dumping ground within 50m lead (excluding the cost of scraping of plaster and re-plastering). (AOR)

Plastering on underside of ceiling 10 mm thick cement plaster 1:3. [As per CSR-2020 item No.15.43]

12.5 mm thick cement plaster 1:5. [As per CSR-2020 item No.15.10]

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (design is homogenous throughout the tile body ). A) Size 600x600 mm. [As per CSR-2020 item No.14.113-a]

Providing and fixing Anti-skid floor titles 10mm thick 300mm x 300mm (fully vitrified) in flooring, skirting and dado in 12.5 mm thick cement plaster, 1.3 base and jointed with white cement slurry in joints including corners, angles and beading. [As per CSR-2020 item No.14.72]

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi matt/ Glosy/ Highly Gloss finish/ Highlighter /emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shadecomplete. [As per CSR-2020 item No.14.127]

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. [As per CSR-2020 item No.16.65]

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade. [As per CSR-2020 item No.16.10]

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade. [As per CSR-2020 item No.16.13]

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. [As per CSR-2020 item No.16.18]

Nicking cement concrete surface (over 28 days old including preparation and laying slurry. [As per CSR-2020 item No.10.31]

Providing and laying 50 mm thick factory made cement concrete interlocking paver block of M-30 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge is cod15058(2006) ( Also not to used over footoaths). [As per CSR-2020 item No.14.136]

Extra Cost for using darker fast shade for interlocking pavers Tiles of any shape & thickness instead of grey colours. [As per CSR-2020 item No.14.141]

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socket single socketed (working pressure 4 kgf/cm2) conforming to IS : 4985, including fixing with MS clamps U-PVC (working pressure 4kgf/cm2 pipe 110 mm dia. [As per CSR-2020 item No.13.74-a-i]

Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend. [As per CSR-2020 item No.13.75-a]

WATER SUPPLY & SANITARY INSTALLATION

Dismantling Sanitary fixtures such as Eurpoean/ Indian/ Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. Complete in all respect as required by Engineer-in-Charge. Eurpoean/ Indian/ Orissa W.C. [As per CSR-2020 item No.30.88-a]

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. Complete in all respect as required by Engineer-in-Charge. b) PVC / China Ware Cistern. [As per CSR-2020 item No.30.88-b]

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. 15mm internal ailer pipe line. [As per CSR-2020 item No.28.63-a]

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. C Size 75 mm x 50 mm.[As per CSR-2020 item No.30.85-c]

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. A) 15mm i/d. [As per CSR-2020 item No.28.36-a]

Providing & fixing of J-hooks (M.R)

Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. A) 15mm i/d G.I. Union. [As per CSR-2020 item No.28.40-a]

Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type A A (d) 75mm o/d single socket SWR UPVC pipe lines laid complete. [As per CSR-2020 item No.30.74-iii-d]

Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type A. A (b) 110mm o/d single socket SWR UPVC pipe lines laid complete. [As per CSR-2020 item No.30.74-iii-b]

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS – 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. B (v) Elbow 90 Degree (All side socketed). [As per CSR-2020 item No.30.81-iii-b-v]

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS – 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. B (x) Nahani trap without jali 110mmx75mm. [As per CSR-2020 item No.30.81-iii-B-xix]

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. [As per CSR-2020 item No.30.4]

Providing and fixing jet spray with 2'-6" long PVC pipe. With C.P. Brass nut. [As per CSR-2020 item No.30.08-a]

Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. b) C.P. brass 15mm Concealed stop cock with flange. [As per CSR-2020 item No.30.66-b]

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. (iii) Size 630 mm x 450 mm x 830 mm. [As per CSR-2020 item No.30.31-iii]

Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. Brass Accessories: C.P. brass towel rail 600 mm long. [As per CSR-2020 item No.30.58-a]

Providing & Fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect. I) C.P. brass Bib cock long nose/ long body foam flow without flange. [As per CSR-2020 item No.30.65-A-i]

Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge) instead of C.P. brass pillar tap complete in all respect. [As per CSR-2020 item No.30.38]

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. B) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut. [As per CSR-2020 item No.30.72-b]

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer – in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank. (ii)Triple Layer Tanks. [As per CSR-2020 item No.30.97-A-i]

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. [As per CSR-2020 item No.30.20]

Providing and fixing in position automatic brass Ball Cock in tanks. (B) Brass Ball Cock with rod and Plastic Ball (i) 15mm i/d. [As per CSR-2020 item No.30.96-B-i]

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. G.I. tank nipple 15mm i/d. [As per CSR-2020 item No.30.98-a]

Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. [As per CSR-2020 item No.30.64-a]

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. [As per CSR-2020 item No.30.80]

Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. [As per CSR-2020 item No.30.56-A]

Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. brass 15mm stop cock Male and female end. [As per CSR-2020 item No.30.66-a]

Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. c)C.P.brass 15mm Angle valve without flange. [As per CSR-2020 item No.30.66-c]

Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. F) Aluminium khunti with 6 pegs. [As per CSR-2020 item No.30.63-f]

Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. B) 450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal. [As per CSR-2020 item No.29.60-b]

Providing and fixing in position C.I. gully trap cover weighing approximately 7.26 kg and frame for gully trap chamber clear opening size 300mm x 300mm and outside size 330mmx330mm including painting the exposed surface with 3 coats of black bitumastic superior paint of approved manufacture etc. [As per CSR-2020 item No.30.75]

Providing and fixing in position gratings 150mm x 150mm for gully trap. H.C.I. grating including painting with black bitumastic superior paint of approved manufacture three coats. [As per CSR-2020 item No.30.76-a]

Electrical work

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring fan point (Without fan box). [As per CSR-2020 item No.34.05-i-a]

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring light point. [As per CSR-2020 item No.34.05-b-ii]

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring 6 Amp. Plug control comprising wall socket point.[As per CSR-2020 item No.34.05-b-iv]

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring 16/20Amp. power plug control point. [As per CSR-2020 item No.34.05-b-vi]

MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of himbles/lugs:- (ii) MCB Single Pole 6-32amp. (10kA, Curve-C) [As per CSR-2020 item No.34.16-a-ii]

MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of himbles/lugs:- (ii) MCB Single Pole 6-32amp. (10kA, Curve-C) (iii) MCB Single Pole 40amp. (10kA, Curve-C) [As per CSR-2020 item No. 34.16-a-iii]

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc. (iv) SP&N Double Door Distribution Board 16 way each. [As per CSR-2020 item No.34.17-iii]

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4sq.mm (Un-sheathed) [As per CSR-2020 item No.34.09-iv]

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (Un-sheathed) [As per CSR-2020 item No.34.09-iii]

LED street Light 70 W (MR)

AMANDEEP KALIA

ATUL SHARMA GOVT. CONTRACTOR