PROVN OF TOILET NEAR BLDG NO. P-3 AND SPL REP TO DRONACHARYA HALL, STREET LIGHT IN AOP AREA, INTERNAL WIRING BLDG NO.P-2 AND 150 HP PUMP AT WALDEVI UNDER GE NASIK ROAD CAMP

Material and labour for earthing complete with galvanised steel plate electrodes of size 600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 32x 6 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 40 mm bore (Medium grade) all as directed including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm diameter MS bar,including funnel, wire mesh and 20 mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all as specified and directed.

Supply, laying, testing and commissionnig of UG LT cables 1100 volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded Copper conductor, ISI marked, heavy duty including cable glands, cable lugs in LT panel/MDB in building etc to suit the cable including material and labour for all jointing/connecting material as required size, cables laid in trenches/ducts/under plinth floors passing through pipes etc, fixed on wall complete of 50 Sqmm Single Core

Note :- Schedule of Credit of Amount Rs 1,63,198.00 shall be deducted from total amount.

M and L for brick work fly ash brick with old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M and L brick work fly ash brick with old size brick straight or curved on plan to any radius in half brick thick walls, built in 1:4 complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

Surface excavation n. exc 30cm deep and averaging 15 cm deep & getting out in soft/loose soil all as specified and as directed.

S&F Damp proof course 20 mm thick in cm (1:2) mix with integral water proofing compound over a coat of blown bitumen of 1.5 kg per sqm blended with clean sand @ 0.05 cum per sqm.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m to n exc 3.00 in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in hard/dense soil complete all as specified and as directed.

M&L rendering 15 mm thick cement mortar on stone surfaces, concrete surfaces or other than fair faces of brick work in cm 1:4 finished even and fair with out using extra cement

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

M and L moorum/red bajri filling in floors or pavings, laid in layers n. exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M and L for hardcore of gauge n.exc 63mm deposited, spread in layers n.exc 15 cm thick,watered and rammed to a true surface complete all as specified and as directed.

M & L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirupps,spacers and binders complete all as specified and as directed.

M and L for Cement concrete type D2 (1:4:8) using 40mm graded stone aggregates as in foundation lean concrete complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar(1:6) on Stone masonry surfaces, concrete surfaces or fair faces of brick work and finishing even and smooth

M&L for preparation of plastered surfaces of walls and applying two coat of oil bound distemper over a coat chalk whitening primer with 3mm thick of wall care putty prepatory to distemper on walls. Make: Asian tractor UNO/Berger bison acrylic distemper/Nerolac beauty. (Note- preparation on wall putty with grit sandpaper (120) for initial sanding and thereafter switching to fine grit sandpaper (180-220) for finishing touch, sanded machine will be applied on internal walls wherever directed by Engineer-in-Charge)

M&L for preparation of newly plastered surfaces of walls and applying two coats of Acrylic weather proof exterior paint over water based primer complete all as specified and directed Make:Berger weather coat long life 10/ Asian apex ultima/Nerolac excel no dust

M and L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in sub base floor finised etc complete all as specified and as directed.

S&F for Factory made single extruded WPC (Wood Polymer composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan Note : Rate of MS hold fast/Fasteners/SS Dash fastener deemed to be included in quoted rates .

S&F 30 mm thick moulded Prelaminated both side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on front side with wood grain texture on front and plain on back side with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) .

insulation boards any thickness including cover fillets and framework complete all as specified & directed.

Supply and fixing in replacement of 35 Watt LED Security light fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with bracket of adequate size complte IP66 protection and impact resistance of IK08.E68 , including coneecting up with 2/3 core flexible coppper conductor cable, compete all as specified and directed by Engr-in-Charge.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed by Engr-in-charge

S&F 100 mm Butt hinges,medium weight cold rolled Stainless steel all as specified & directed. approved by Engineer-in-Charge

S&F stainless steel tower bolt 150 mm long complete all as specified and directed approved by Engineer-in-Charge.

S&F 150 mm stainless steel handels pull type complete all as specified and directed approved by Engineer-in-Charge.

S&F stainless steel sliding door bolt 300mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed

S and F rotational moulded three layers polyethylene water storage tank capacity 1000 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S and F 20mm bore ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

M & L for 75mm thick PCC (1:3:6) type C-2 using 40mm grade stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

S and F 20mm bore Gun-metal gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S and F of 15mm bore steel tube medium grade galvanised, with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S and F of 20mm bore steel tube medium grade galvanised, with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Kirloskar make Horizontal Split Case,Pumpset Assembly in Special construction suitable to Discharge 30,000 GPH at 80 to 100 mtr Head Pumpset Consist of:- 1. Complete pump Assembly 2. 3 ph, 415V,Squarril Cage Induction motor 3. Fabricated base frame/Plate for installation of pump & Motor 4. Flexible Coupling 5 Coupling Guard/Foundation bolts Corrocoat Specification: 1. Coating and thickness internal: corroglass 600 series+Fluiglide system ( Corrocoat EA+ Corrocoat EB base coat & Flugilde E as top coat) total system thickness 1.5 mm DFT 2. The coating material shall be suitable for efficiency improvement and corrosion protection 3.Surface preparation: by abrasive blastingas per Sa2.5/Sa3.0

Supply,installation, testing and commissioning (CPRI Approved) factory fabricated,indoor type,LT panel board made out of 2.00 mm thick CRCA Sheet CRCA Sheet with dust and vermin proof double door with front side openable,including noprene rubber gasket ,suitable for 440 volts 3 phase 4 wire system ,including Danger plate,Earthing Strip point and ventilation louvers at rear side,bottom detachable gland plate complete with suitable size zinc chromium plated nuts,bolts and washers etc and embadded with 50 x 50 x 6 mm mild steel angle iron frame and 600 mm above tne normal ground level complete with PCC foundation in cement concrete 1:3:6 (20mm graded aggregate) and testing after installation including complete all as specified and comprising of 150 HP Soft starter panel with incommer MCCB 400A, TP, Thermal Maganatic 36 KA,RYB, ON off Trip indicator,MFM,RPM meter, contactor and Panel power coated Ral 7032 complete all as specified and comprising of following:- Suitable for 150HP fully automatic star delta starter

M & L for glazed coloured ceramic tiles 600x300x7 mm thick as in verticle surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 cm thick plaster in cm 1:4 complete all as specified and as directed.

Material & Labour for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of new steel surfaces all as specified and directed by Engr-in-charge

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width n exc 10cm all as specified and directed by Engr-in-charge

S&F in repair 15mm dia brass chromium plated two way bib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make : Jaguar Cat Part No: FLR 5041 N or equivalent in kohlar, grohe and Roca .

M & L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors over 15mm thick cement screed bed in cm 1:6 set and jointed in neet cement slurry and pointed in coloured cement to match the surface complete all as specified and as directed.

S & F 15 mm size chromium plated swan neck type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed Make : Cera Cat No F2014104 or equivalent in kohlar, grohe and Roca .

M & L for mild steel TMT bars 10mm dia and over cut to length bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality coinforming to IS complete all as specified and as directed.

M and L cutting existing steel tubing for alterations or addtions (Each cut measured) for 20mm bore of pipe all as specified and as directed.

S and F of 25mm bore steel tube medium grade galvanised, with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S&F 5mm thick mirrors with fixed with stainless steel bolt & nut and fixed to brick/stone masonry walls built in cement mortor etc complete all as directed.

S&F brass chromium plated SS single towel rail 600mm long Cat Part No. CAN-1111SM of Jaquar or or equivalent in kohlar, grohe and Roca.

S & F CP health faucet ABS body suitable for 15mm bore with 1.00m SS braided flexible connection pipe and wall hook complete all as specified and as directed.

S & F stop valves, cast copper alloy 15mm bore, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F 75mm PVC (SWR) vent cowl all as specified and as directed.

S & F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joint and fixing adhessive with all fittings, including all fixed to walls complete all as specified and as directed.

S & F PVC Connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S and F 110mm bore PVC (SWR) junction single-Tee (equal or unequal) with access door complete all as specified and as directed.

Supplying and Fixing acoustic ceiling board of size 600x600X15 mm has excellent noise absorption upto 0.90 NRC as per ISO can be installed on T-24 grid system of 0.6mm thick Main ‘T’ length minimum 3000mm, web minimum 35mm to be placed at 600mm centre to centre and secondary cross ‘T’ of length 600mm web minimum 35mm inter locked, 4mm dia GI Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, Specially designed for Acoustic Vibration management and long life complete all as specified & directed. (Cat No. Armstrong Optra FG pebble G600W060615 or G600W060615MLS)

Supply, fixing, install and testing of 7 mtr height, top outer dia 105 mm, bottom outer dia 215 mm, translucent conical pole glass fibre reinforced with polymer matrix combination of fibre glass and resin making it a strong having a highest technology has filament winding by using CNC method, glass content of 65 to 70 %, specific garvity 1.42g/CC, dieleectric strength 40 KV/mm, tensile strength 225Mpa, water absorption 0.3% flexural strength 269mpa, Izod impact strength of 80 k/Jm², barcol hardness of 45 BHU, Tensile module of 9000Mpa, Surface resistivity of 1.6x1016Ω, tensile modules of elasticity 22918 N/mm² complete including shockproof, maintenance free, Non conductive, light in weight, wind speed sustainability is 150 KM/H, base plate is made in GFRP material with customized LOGO and LED strips (LED strip colour specified by Engineer in Charge) complet all as specified and directed. Note : Rate for LED strips, RCC foundation as per drawing provided by OEM, Excavation, returning filling, 7mtr pole, decorative arm 1 mtr long, junction box, foundation bolts and nuts included in this item rate.

M&L for dismantling of existing kerb stone and Supply and Fixing of LED Kerb stone of size 500 MM x 150 MM x 200 MM made of PE Engineered plastic with LED PCB strip mounted with 2835 SMD and 100 R resistor soldered on PCB with male and female connectors of IP 68 rating for interconnection between two Kerb stones and one power supply of 240V AC, 36V-DC of meanwell make. The Kerb stone should be integrated with M10 inserts in the kerbs leg supports for easily fixing in the ground using M10 anchor fasteners duly drilling in the ground and fixing with required cement mixture /epoxy as per direction of Engineer in charge. Warranty of minium 1 year, having adequate number of connectors and power supply kit for necessary connection including wire and other material as required at site as per manufacturer's instructions including necessary excavation and cement concrete. The rate includes of required components for connection from the main electric supply. The product should be ISO 9001:2015 certificate for quality checks. Seller should have manufacturer's authoriasation. Load bearing capacity should be miniumun 850/Kg Sq inch. Note : Items required for connections to main electric supply from near by electric sources to be included in the quoted rates complete all as specified and directed. Make : Shriyas Electricals and Power Solutions or Signkraft or equivalent.

S&F for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S and F 75mm bore PVC (SWR) junction single-Tee (equal or unequal) with access door complete all as specified and as directed.

S & F CP soap dish complete all as specified and as directed by Engr-in-Charge. Make Jaquar Code No- AKP -35731 P or equivalent in kohlar, grohe and Roca

Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with modular cover plate with frame of adequate required modules for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for the following:- Note :- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

M & L machine cut cudappa stone slab 20-25 mm thick in urinal partition and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota stone slab 10-15mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with gray cement slurry with pigment to match the shade of the slab including rubbing and polishing complete all as specified and d

(d) All as per ser item No. 120.01 here in before but on independent board.

irected.

M&L Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

S&F powder coated of powder coating 50 micron sliding window, three track shutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass of 4mm thick black tinted and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm, size of side rails, top rails , bottom rail 30x10mm and size of three track chowkat frame 90 x 30mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37 complete all as specified and as directed.

S&F for powder coated of powder coating 50 micron aluminium ventilator shutters with frame not less than 0.45Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm, shutters aluminium sections weighing 0.45 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

Supply only liquid water proofing.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated of approved profile steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specfied and as directed.

S & F pre-painted galvalume aluminium zinc coating AZ-150 grade GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specfied and as directed. (Make -JSW Colouron + or Tata)

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F rolled mild steel Joist, channel, angle, flat sections, fixed independently, without connecting plates, or M S tubular sections etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) grade Fe 290( E-165) all as directed by Engr-in-charge

S&F rolled mild steel plain angle cleats and plate for securing purlins to ragfter and similar small articals confirming to Fe-410-0 or Fe -310-0 complete all as specified and directed

S and F bib taps, cast copper alloy 15mm bore, screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. (Cat No. Cera QT F2006151 or equivalent in kohlar, grohe and Roca )

S and F vitreous china water closet squating pan Orissa pattern 580 X 440mm white with integral foot rest and P/S trap complete including lime concrete bedding complete all as specified and as directed. Make : Cera Cat No S3010110) or equivalent in kohlar, grohe and Roca .

Providing precast cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) in manhole cover slab placed complete all as specified and as directed.

S & F Vitreous china wash down water closet (pedestal pattern) of size 520x360x390mm , snow white including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel choromium plated or aluminium hinging device complete fixed. Make : Cera Cat No. S1053101 S trap or equivalent in kohlar, grohe and Roca .

S & F vitreous china counter type oval shape wash basin, snow white, size 560 X 470x190 mm or equivalent including cutting for and pinning in for bracket and 32mm dia CP waste coupling with wall mount stainless steel chrome finish 450mm bottle trap set with waste outlet pipe and connection to drain pipe complete all as specified and as directed. (Cat No. Cera S2030104_13 or equivalent in kohlar, grohe and Roca .

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for incl cutting of reinforced steel complete all as specified and directed

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.

S and F vitreous china water closet squating pan Orissa pattern 580 X 440mm white with integral foot rest and P/S trap complete including lime concrete bedding complete all as specified and as directed. Make : Cera Cat No S3010110) or equivalent in kohlar, grohe and Roca .

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Supply and fixing PVC valveless, syphonic action type, flushing cistern, low level of 10 ltr capacity, SNOW white with inlet, ball valve, float and handle including brackets the exposed surfaces of brakets shall be painted with two coats of synthetic enamel paint over one coat of primer complete all as specified and as directed. Make: Cera Cat No. B1010109

M and L for extra for forming fair finished drain or channel using extra cement up to 30 cm inner girth complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

S & F pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated of approved profile steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws with washer complete all as specified and directed

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed

M&L for Brick works with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specifed and directed

S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors all as specified and directed by Engr-in-charge

M&L rendering 15 mm thick cement mortar on stone surfaces, concrete surfaces or other than fair faces of brick work in cm 1:4 finished even and fair with out using extra cement complete all as specifed and directed

M&L for preparating newly plastered surfaces of walls and applying two coats of Acrylic weather proof exterior paint over water based primer including prepare of surface complete all as specified and directed

M&L for complete removal of existing wall surfaces including preparation (i.e. brooming down on plastered / unplastered surfaces complete) and applying two coat of Acrylic weather proof exterior paint over water based primer(Make: APEX of Asian Paint or equivalent) complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

S & F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors with all fittings complete all as specified and as directed.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. all as specified and directed by Engr-in-charge

M&L for preparating newly plastered surfaces of walls and applying two coats of OBD over one coat of chalk whitning, prepatory to distempering complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer - in - Charge.

M&L for dismantling of existing octagonal pole 7 mtr height including street light fittings, bracket arm and shifting of pole to baundary wall near by post no 8 complete with excavation, RCC foundation of as per drawing (Bajaj Make), anchor bolts, nuts and washers complete all as specified and directed. Note : Rate for RCC foundation as per drawing, Excavation, returning filling, 7mtr pole, bracket, foundation anchor bolts and nuts included in this item rate.

S& F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde E- 250) quality A all as specified and directed by Engr-in-charge

M&L for dismantling of existing steel poles/ struts, any size.

Supply and fixing in replacement of 10 Sqmm, 1100 volts grade, heavy duty, stranded conductor, 2 core cable PVC insulated aluminium conductor served with inner sheathing of PVC sheathed in service connections complete all as specified and directed.

(c) All as per ser item No. 120.01 herein before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.

Supply and fixing in replacement of Energy efficient LED Street / Roadway with PDC housing luminaire, high PF, 60W, energy saving and environmental friendly long life versatile pressure die cast aluminium housing, clear toughned glass, IP 66 protection, 4KV inbuilt surge protection, 240 Volts, 120 lumens/watt, colour temp. 5700K, of Cat Part No ENXT P72L WH PO PC SD MT of make Bajaj or equivalent complete all as specified and directed.

Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 2.5 Sqmm drawn through in and including PVC heavy duty surface casing caping including 2.5 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note for Srl item No 14 & 15 herein before :- (i) Two runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.

Material and labour for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection of size 2 core 10 sqmm to 3.5 core 50 sqmm cable complete all as specified and directed.

Demolition of PCC of any description above/below ground level exceeding 15cm complete all as specified and directed by Engr-in-Charge.

Suuply and fixing in replacement of machine pressed precast interlocking paver block any size and shape of 60 mm thickness M-40 grade confirming to IS: 15658-2006 with grey cement and pigment and vibrated with mechanical vibrator, with 30mm thick crushed sand for cushioning all as directed. Note :- (i) Rate include for dismantling of existing interlocking paver block including PCC work.

M&L for PCC 1:2:4 type C1 using 20mm graded aggregate for paver block including necessary form work and fair finishing of exposed surface of concrete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc. all as specified and directed by Engr-in-charge

Supply and fixing in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including PVC heavy duty concealed conduit including 10 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillers etc but including ashlar facings, dressed stone work and precast concrete articles all as specified and directed by Engr-in-charge

(a) One light point/ fan point controlled by one, one way switch.

(b) One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

wash or cement base paint to match the surface with existing work all as specified and directed by Engr-in-charge

Repairing broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) and cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by white

Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing and caping (ISI marked) of adequate size and its accessories with PVC boxes of adequate size, with modular cover plate with frame of adequate required modules for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for the following:-

(a) One light point and one fan point controlled by one, one way swtich.

S and F 75mm PVC (SWR) coupler complete all as specified and as directed.

OUTGOING (i) MNX 140 (CS94138) -03 Nos (ii) ADD ON Block 2NO=2NC -03 Nos (iii) Relay (90-150) (SS94138OOMO) -01 Nos (iv) Timer S/D (12SDTO)-01 Nos (v) Control Transformer-Control MCB 2P,6A (vi) Internal distrubtion -with suitable size bus bar As Reqd (vii) Copper bus bar of suitable capacity (viii) MS Stand -400 mm

S& F NAVRTAN SPECIALITY CHEMICALS LLP, GIZA BRAND PVC sheet wall panelling of thickness 5mm prelam PVC sheet consisting of panels having size 1220x2440mm stuck on inner frame work of 50mm wide strips of 5mm thick PVC sheet. The strips should have in their centre a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10" between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panel for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places whrere two panels are joined, using solvent complete all as specified & directed.

Supply and fixing switch modular type 6 Amps one way, 1 module, AC 230 Volts, shrouded terminal, ISI marked complete all as specified and directed.

Supply and fixing modular type socket 6 Amps 3 pin round socket with child safety shutter (ISI marke), AC 230 Volts, shrouded terminals, smooth plug removal and insertion complete all as specified and directed.

Supply and fixing switch modular type 16 Amps one way, 1 module, AC 230 Volts, LED based indicator, shrouded terminal, ISI marked complete all as specified and directed.

Supply and fixing modular type socket 6 Amps/ 16 Amp 3 pin socket with child safety shutter (ISI marke), AC 230 Volts, shrouded terminals, smooth plug removal and insertion com

plete all as specified and directed.

Supply and fixing invertor LED bulkhead 10 watt 220 volts AC with IP 65 protection with inbuilt battery back-up complete with drivers, clamps and accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

M&L for safely disconnecting of existing LED panel light fittings 36 watt and kept aside for re-fixing after completion of B/R nature ceiling work complete replacement of 3 core copper conductor wire from ceiling rose to light fittings all as specified and directed by Engineer in Charge.

Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including PVC heavy duty surface casing caping including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

S and F 110 mm PVC (SWR) vent cowl complete all as specified and as directed.

S and F 110 mm PVC (SWR) coupler complete all as specified and as directed.

Supply and fix ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish. Make - Havells /Anchor / Legrand.

S&F in replacement of On Load change over switch of capacity 125 Amp, 4 pole, 415 volts, in sheet steel enclosure with extended handle complete all as specified and directed..

Supply and fixing modular type fan 8 step regulator, 100 watt, AC 230 Volts, 2 module, laser marking complete all as specified and directed. .

Supply and fixing LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed type fittings, IP 20 with epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified. Make- L&T/ ABB/ Legrand/ Schenider.

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty concealed conduit including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Material and labour for in replacement of MS box of size 180x120x30 cm depth, dust proof with front opening hinged door both side, made out of 2mm thick MS sheet cubical type with powder coated painting for mounting of MCCB, DB's, electric meter etc inside the box fixed in wall by necessary cutting of wall of suitable size in concealled and making good the surface, by applying cement work, brick work and matching colour (Oil bond distemper) etc including dismantling of MS box with MCCB DB's and electric meters and refixing the same MCCB, DB's and electric meters in new box carefully including necessary electric connection by suitable size of copper conductor cable of suitable length and testing completed all as directed by Engr-in-Charge.

Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 4 way with 200 Amps rated busbar all as specified and directed.

Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 8 way with 200 Amps rated busbar all as specified and directed.

Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed.

Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed. Make - Hager CP No VYS08D or Legrand/ ABB.

Supply and fixing in replacement 4 Pole MCCB 125 Amp, 50 Hz, 415 V, with adjustable thermal & adjustable magnetic setting, breaking capacity 25 KA. Make - Hager CP No HHA126U or Schnider/ Legrand.

Supply and fix in replacement MCB FP 63 Amp, 415 Volts, 50 Hz with 10 KA Make - Hager of CP No NBN463N or Legrand /ABB.

Supply and fixing in replacement of MCB DP/SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA. Make - Hager CP No NBN232N or Legrand/ ABB.

Supply and fixing in replacement of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA. Make - Hager CP No NBN132N or Legrand/ ABB.

Supply and fixing in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note for Srl item No 12 & 13 :- (i) Four runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.

Supply and fixing of LED 10 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.

Supply and fixing in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 16 Sqmm drawn through in and including PVC heavy duty concealed conduit including 16 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosures with plug socket triple pole and earth enclosure with three pin and earth plug with socket, 415 volts complete with one MCB of 32 Amps (TP) complete all as specified. Make- L&T/ ABB/ Legrand/ Schenider.

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including PVC heavy duty concealed conduit including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting, regulator, sockets, main switches materials to store & making good of disturb surfaces of wall/floors etc as specified & directed.

Supply and fixinf in replacement of LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, IP 20 with battery backup and tri-colour CCT with remote control, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including PVC heavy duty surface casing caping including 10 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Four runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.

Supply and fixing in replacement MCCB 63 Amp TP, 415 volts 16KA. Make - Hager CP No HDA063U or Schnider/ Legrand.

S & F 110mm bore PVC (SWR) bends complete all as specified and as directed.

Supply and fixing in replacement of metal box MS enclosure made out of CRCA sheet 3.00mm thick of size 500mm x 500mm x 300mm depth complete with three phase and neutral aluminium bus bar of capacity 200 Amps and fixing of 3P, 100A MCCB for incoming and MCB SPN 20 Amp - 6 Nos for outgoing mounted on epoxy insulators, fixing arrangement with suitable MS Clamps of size 32 x 6 mm thick all as specified and directed. Note : Rate for MCCB 100 Amp, MCB SPN 20 Amp 6 Nos, Aluminium Busbar 3 pole and 1 neutral of 200 Amp, epoxy insulators and MS clamps of size 32 x 6mm included in this item rate.

Material and labour for in replacement of MS box of size 160x120x30 cm depth, dust proof with front opening hinged door both side, made out of 2mm thick MS sheet cubical type with powder coated painting for mounting of MCCB, DB's, electric meter etc inside the box fixed in wall by necessary cutting of wall of suitable size in concealled and making good the surface, by applying cement work, brick work and matching colour (Oil bond distemper) etc including dismantling of MS box with MCCB DB's and electric meters and refixing the same MCCB, DB's and electric meters in new box carefully including necessary electric connection by suitable size of copper conductor cable of suitable length and testing completed all as directed by Engr-in-Charge.

Supply and fixing in replacement of Mild Steel 3 Meter Decorative Garden Light Poles double bracket for gardens including borage NX series decorative luminaire 60 watt, 3000K with die cast aluminium with UV stabilized clear PC diffuser with decorative crown complete with excavation work and PCC foundation work 1:2:4 of adequate size for installation of mast pole complete all as specified and directed by Engr in Charge.

S & F in replacement of PVC weather proof, hinged door, junction box with 200A Aluminium bus bar, 415V, Neutral link and 1No MCB SP of 6 Amps, necessary fixing arrangement such as clamps, nut, bolts, etc including dismantling old unservieable junction box all as specified and directed. Make : Sintex, Cat No. GSJB 2014 or Hensel.

Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

Supply and fixing Galvanised Steel water tubing, (ISI Marked) medium grade of 25 mm bore with and including all fittings and fixtures such as GI bends, tee, union etc, in trenches/on wall complete and connecting to water supply pipe line and testing all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Gun metal, globe or gate valves, (ISI marked ) suitable for 25mm dia pipe with iron wheel head screwed both end for iron pipe and fixed for (externally threaded) complete all as specified and directed.

M & L for drilling and tapping existing CI/GI pipe line upto 150 mm dia for taking branch connections of 25mm dia pipe including all necessary GI fittings, jointing material, earth work, etc.complete all as specified and directed.

M & L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure.

Supply and fixing 30 Watt LED security light fitting luminaire, 130lumens/watt, power factor more than 0.95, surge protection 4KV, energy saving and environmental friendly long life LED street light made up of PDC housing with IP 66 ingress protection and Impact protection IK 08, complete including fixing arrangement in existing pipe and con

M & L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure.

M & L Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI wire 4.0 mm dia, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 15 mm, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.

Supply and fixing of distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways all as specified & directed.

Supply and fixing of MCB DP/SPN 32 Amps, 430 Volts, 50 Hz with 10 KA.

Supply and fixing of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA. Make - Hager CP No NBN132N or Legrand/ ABB.

necting up with 2/3 core flexible coppper conductor cable and all as specified by Engr-in-Charge.

Supply and fixing exhaust fan 300mm sweep, 1400RPM, single phase, heavy duty including fixing of mounting frame in the round hole cutting in wall and making good the disturbed surfaces, fixing by means of rugged bolts, nuts and washers etc on the round hole cut in wall, including three core copper conductor flexible cord of 1.5 sqmm cross sectional area of required length from ceiling rose to porcelain connector block of exhaust fan suitable on working AC, SP 230 V electric supply including GI louver shutters complete all as specified and as directed.

Taking out unserviceable Centrifugal pump and Induction Motor 150 HP from its foundation by dismantling cables,earthing connection ,nut bolts etc from waldevi pump house and shifting the C/F by using T & P (Vech,Cranes etc) to MES Yard complete all as directed Note :-Quotated rates includes all T & P required for the shifting of Centrifugal pump including induction motor

Taking out unserviceable Starter pnel from its foundation by dismantling cables,earthing connection ,nut bolts etc from waldevi pump house complete all as directed Note :-Quotated rates includes all T & P required for dismantling Starter panel

Supply and Install of 150HP Kirloskar Horizontal Split Case Corrocoated Energy Efficiency pumpset DSM 150x45 with energy efficienct motor, Casing CI ,Impeller-Bronze,Shaft-CS40C8,Shaft Sleeves-Bronze with Special Corrocoating to pump with internals of rotating assly Impeller and insert,top and bottom Casing should be Corrocoated with special coat as per the std of pu

S & F 75mm bore PVC (SWR) bends complete all as specified and as directed.

S & F 75mm bore with access door complete all as specified and as directed.

mp and efficiency & protection against corrosion protection and complete acessories at Waldevi pumping Station with following contions:-

M&L for rendering 15 mm thick (1: 6) on fair faces of brick/stone work or concrete surfaces finished even and smooth without using extra cement

Supply, fixing and laying in replacement of in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable, 3.5 core 50 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, Armoured with galvanised steel wire and overall sheathed including cable gland, lugs, jointing material etc, jointing, connecting, testing and commissioning all as specified and directed.

INCOMING:- (i) Bus bar chamber comparising 4 Nos Aluminium Strip bus bar air insulated and PVC sheathed Capacity 800 Amps with colour coding in separate sheet enclsure (ii) MCCB with thermal based release 4 pole ,400 Amps ,50 Hz 36 KA-01 No (I/C) (iii) Digital multi function panel mounted meter for energy monitoring to display Voltage ,Current,Active power,reactive power,apperent power,power factor,frequency and all other paramater including necessary CTs,PTs and fuses and wiring-01 No (iv) LED type /neon type indicating lamp panel mounted type RYB-03 Nos (v) Single Phase preventer-01 Nos

Supply, fixing and laying in replacement of in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable, 4 core 16 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, Armoured with galvanised steel wire and overall sheathed including cable gland, lugs, jointing material etc, jointing, connecting, testing and commissioning all as specified and directed.

Supply and fix galvanized earth strip 32 mm x 6 mm for earthing from earth plate to equipment complete fixed on pocelain insulator every 1 meter interval all as specified and as directed.

Supply and fixing of 35 Watt LED security light fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with bracket of adequate size complte IP66 protection and impact resistance of IK08.E68 , including coneecting up with 2/3 core flexible coppper conductor cable, compete all as specified and directed by Engr-in-Charge.