PROVISON OF COVERED SHED FOR 2X40 FEET CONTAINER STEEL FOR STORING OF ECHS POLYCLINICS MEDICINES UNDER SEMO COVER OF MH DEVLALI NEAR BLDG NO T 01 MED STORE AT MH DEVLALI UNDER THE AOR OF GE DEVLALI

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/ loose soil.

M&L for Cement concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass-concrete alll as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM (1:6) complete all as specefied and directed.

M&L for preparation of New or old previously untreated steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in loose / soft soil all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft / loose soils, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specefied and directed.

M & L for Hardcore of broken stone or boulders of gauge n exc. 63 mm,deposited,spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for machine pressed precast concrete chequered cement concrete tiles powder coated coloured ( of approved quality )30cm X 30cm X 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed.

S&F mild steel work (Tubular/ Hollow Section) as in Purline, rafter , Trusses, Post and wind ties as in roof including , flat iron fillets for securing wire mesh etc including all necessary welding, drilling bolting or riverting, etc, and similar work and gate conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

M & L for Cement concrete Type B2 1:2:4 (40 mm graded aggregate) in foundations, filling and mass-concrete complete all as specified and direccted.

S & F powder coated aluminum alloy interlocking snap grid 605mm x 605mm consists of Min Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and as directed.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors over and incl. 15mm thick screed bed in cement mortar (1:6) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in skirting etc.over incl.back coat of Cement mortar (1:4) 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and direccted

M & L for Machine cut kota stone slab 20-25mm thick as in skirting steps riser over and incl. 10mm thick cement screed base laid in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete complete all as specified and directed.

M&L for 75mm thick cement concrete type C2 1:3:6 (40 mm graded stone aggregate) in plinth protection/floors finished fair all as specified and directed.

S&F 30 mm thick flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type on both sides, all as directed.

M&L for decorative laminate type I,of surface finish ,colour and pattern as approved fixed with approved adhesive as per maker's instruction, 0.9mm thick laminate

M & L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M & L for Cement concrte Type C1 1:3:6 ( 20 mm graded aggregate ) as Bed Block for hold fast complete all as specified and directed.

S & F Mild steel as hold fasts Fe.290.Gde-E-165 complete all as specified and directed.

M & L for RCC 1:2:4 Type Bo using 12.5mm grade stone aggregate as in slab supported on walls,beams and coloumns in floors,roofs,Chajjas,landings balconies,canopies,deck slabsand in shelves including formwork complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately).

S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia of wire or securing with clips all as specified and directed.

S & F Butt hinges, medium weight, Brass, and fixed 125 mm length complete all as specified and directed.

S & F extruded Brass handles, fabricated type polished 150 mm complete all as specified and directed.

.S & F extruded Brass handles, fabricated type polished 200 mm complete all as specified and directed.

S & F brass , barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed in repair 200 mm complete all as specified and directed.

S & F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 250mm complete all as specified and directed.

S & F brass , sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 300mm complete all as specified and directed.

S & F floor door stpper of brass , body and tongue with hard drawn steel spring 140mm overaii length of cover plate complete all as specified and directed.

S & F powder coated aluminium sliding window,two track shutters, side hung type with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 5mm thick size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37 all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth ( without using extra cement ) complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth with sagol finish complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper with primer over 1.5mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plstered surfaces and applying two coat of cement base paint on walls, white or tinted all as specified and directed.

M&L for Plain Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in Coping all as specified

M&L for Plain Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in surface channels and drains complete all as specified

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

Material and labour for light point wiring controlled by one switch with stranded copper conductor Cable PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including in PVC conduit of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core sheathed cable continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed.

Material and labour for concealed point wiring with stranded copper conductor Cable PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including in PVC conduit of suitable size In stone wall with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core sheathed cable continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed

(a) One light point controlled by one switch with cable 1.5Sqmm Size

(c) One fan point controlled by one switch with cable 1.5sqmm size

(d) One 5 pin socket outlet 5 Amps on the same board.

(e) One 5 pin socket outlet. 5 Amps on the independent. board

All as per item above but One 15 A socket outlet independent with 4 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.

Supply and fix modular switch one way 6A ,1 module complete all as specified and directed.

Supply and fix modular switch one way 16 Amps 1 module complete all as specified .

Supply and fixing Socket 6A-2/3 pin combined 2 module complete all aspecified and directed.

Supply and Fixing Socket 6A/16A-2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing Modular White cover plate with frame,1 Module

Supply and fixing Modular White cover plate with frame,2 Module

Supply and fixing Modular White cover plate with frame,3 Module

Supply and fixing Modular White cover plate with frame,6 Module

Supply and fixing Modular White cover plate with frame,8 Module

Supply and fixing Modular White cover plate with frame,12 Module

Supply and fixing Modular Metal flush box 3 module

Supply and fixing Modular Metal flush box 6 module

Supply and fixing Modular Metal flush box 8 module

Supply and fixing Modular Metal flush box 12 module

Supply and fixing Modular Fan requlator 120w With 360 degree rotational -2 module all as specified and directed

M&L for cutting chases pinning in making good to facings where required and pointing in cement motor 1:3 to ends or edges of landings steps,cills sunshades,shelves,lintels,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth in stone concrete block or slab walls complete all as specified and directed.

S & F double door sheet metal enclosures factory made DBs 4 way,240 volts,protection class IP-43, SUITABLE FOR FIXING OF MCBs,Isolators etc,confirming as per IEC 61439-3,Suitable for flush Mounting and surface mounting, With Neutral bar,Earthbar and cable ties for cable management,fully shrouded Neutral bars,prefitted masking sheet complete all as specified and as directed.Make:-Legrang,Cat No:5076 10 or equilavent in Siemens/Hanger/ L & T

S & F double door sheet metal enclosures factory made DBs 8 way,240 volts,protection class IP-43, SUITABLE FOR FIXING OF MCBs,Isolators etc,confirming as per IEC 61439-3,Suitable for flush Mounting and surface mounting, With Neutral bar,Earthbar and cable ties for cable management,fully shrouded Neutral bars,prefitted masking sheet complete all as specified and as directed.Make:-Legrang,Cat No:5076 11 or equilavent in Siemens/Hanger/ L & T

S&F MCBs Single Pole of 240 volts 5-32 Amps,10KA Capacity, 'C' Series of Make:-Legrand,Cat No: 4085-87 to 90,92,93,94,95 or eqivalent in Siemens/Hnger / L & T

S&F MCBs Single pole + Neutral 240 Volts,32-63 Amps,10KA Capacity 'C' SERIES OF MAKE:Legrand,Cat No : 4086-17 to 20 or equivalent in siemens/Hanger / L & T

S&F OF Recess mounting 28 LED 5700K Luminaries fixtures diffused sutable for ceiling size 2'x2' feet endura make :- havells cat part no:-PLUTONEO2X2PLR28WLED857S Or equivalent in philips/Wipro/Bajaj

S & F of lamp angle/batten holder Bakelite with 5W LED Bulb complete all as specified and as directed.

S&F Decorative ultra slim linear LED lighting with extruded polycarbonate,environment friendly,energy efficient E-LITE LED PRIDE PLUS 18W LED 6000K Make:-Havells Cat Part num:- LHEXBLP7PN1W018 or equivalent in philips/Wipro/Bajaj

M&L for earthing of poles,system with galvanised steel earth plate electrode of size 600 x 600 x 6mm thick buride vertically in ground not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground leveland conected to GI strip 32x6 mm by means of nuts,bolts and washers and encased in and including 40mm dia GI light grade pipe upto 2.4 mtr height from ground level fixed by MS flat iron clamp 40mm x 5mm with nut,bolt and washers ,GI strip fixed to base along pole and connected to existing system with alternate layer of charcoal dust ,salt packed around plate 150mm thick including watering GI pipe ,light grade 20 mm dia 1.5 mtr long fixed to funnel with wire mesh complete with PCC chamber and RCC chamber cover all as per electrical plate NO3 of SSR Part-1 -2009 including excavation and earth work in any type of starta and testing on completion.(Note:-GI strip and GI pipe beyond 7.5mtr long shall be measured and paid separately.

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S&F PVC Conduit pipe of 20mm size for LAN Cable and making it concealed in the wall all as specified and directed.

S&F Linear & compact 9W LED 6000k mirror Light with decorative grey end caps,Pokycarbonate body and ripped opal diffuser. Make:-Havells Cat Part No:-LHEXARP7PN1W009 or equivalent in Wipro/bajaj.

Supply, Laying , jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed of sizes 10 sqmm 2 core

M&L Dry sand , filling in trenches around under ground cable complete all as specified and directed. (Note :- Punned down thickness shall only be measured)

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

S&F LED Bldg Security light Endura City liner uber having long life versalite pressure die-cast aluminium IP66 roadway luminaries with high power 20W LED as light source with acrylic cover Make:-Havells LHEWEBP7PL6S020 or equivalent in Wipro/Philips/Bajaj.

Supply & fixing/ Install new ceiling fan white colour 1200mm sweep type with complete accessories all as specified and directed by Engr-in-Charge. Make : Havells Model:- Velocity HS

Pole mounting bracket made out of GI pipe of 40mm dia, medium grade ,bent to (60 degree) required shape of length 1.2 mtr with two No's 'of flat iron clamps made out of 50x6mm with nuts, bolts & washers duly painted with aluminium paint over a coat of primer, including taking down old bracket, all as specified and directed.

Note: Amount of sch of credit of Rs. Nil will be deducted from total amount of BOQ.

M/S MANISH CONSTRUCTION CO

J Sams Contructions

M/S SAMEER SUBHASH PATANI

SHYAM CONSTRUCTION

M/S B R BHALERAO

Alpha Construction

M/s. JBSR ENTERPRISES.

M/S GURBAX AND CO