Supply, Installation, Testing and Commissioning of street light and allied work at the various locations of BHU, Varanasi

Supplying & erection of flange mounted hot dip galvanized octagonal poles of 6 mtrs. height made from 3 mm thick HR Steel plate having bottom dia of 130 mm & top dia. of 70 mm complete with window sleeve type cover arrangement at a height of 0.5 mtrs from the base for cable termination block welded on both ends etc. and galvanized base plate of size 220 mm x 220 mm x 12 mm thick on the existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination. Supply & fixing 6 mm thick laminated mounted sheet inside the window i/c providing mounting arrangement etc. complete as reqd. Supply and fixing 63 amps. terminal block 8 nos. suitable for 1.1 KV grade 4CX 16 sq. mm Armoured cable on DIN channel i/c pdg. and fixing DIN channel of suitable length on the existing laminated sheet.Supply & fixing of 6 amp. SP MCB 'C' characteristics Curve - 1 No., earth stud -1 No., welded at suitable height one nos washers, springs washers & nuts. Provision on suitable height one onoswasherssprinings washers & nuts. Provision on suitable height for fixing of additional bracket Cable supports clamps suitable for 4x10 /4 x 16 sq. mm cable Pole Drawing should be approved by the Engineer In-charge (Make:-Valmont/Bajaj/RR Ispat/Paruthi/Utkarsh/BPP/Transrail) (Drawing & pole should be approved by the Engineer In-charge) Supplying & erection of flange mounted hot dip galvanized octagonal poles of 6 mtrs. height made from 3 mm thick HR Steel plate having bottom dia of 130 mm & top dia. of 70 mm complete with window sleeve type cover arrangement at a height of 0.5 mtrs from the base for cable termination block welded on both ends etc. and galvanized base plate of size 220 mm x 220 mm x 12 mm thick on the existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination. Supply & fixing 6 mm thick laminated mounted sheet inside the window i/c providing mounting arrangement etc. complete as reqd. Supply and fixing 63 amps. terminal block 8 nos. suitable for 1.1 KV grade 4CX 16 sq. mm Armoured cable on DIN channel i/c pdg. and fixing DIN channel of suitable length on the existing laminated sheet.Supply & fixing of 6 amp. SP MCB 'C' characteristics Curve - 1 No., earth stud -1 No., welded at suitable height one nos washers, springs washers & nuts. Provision on suitable height one onoswasherssprinings washers & nuts. Provision on suitable height for fixing of additional bracket Cable supports clamps suitable for 4x10 /4 x 16 sq. mm cable Pole Drawing should be approved by the Engineer In-charge (Make:-Valmont/Bajaj/RR Ispat/Paruthi/Utkarsh/BPP/Transrail) (Drawing & pole should be approved by the Engineer In-charge)

Providing and laying in position (1:2:4) reinforced cement Concrete foundation of size 450 mm (L) X 450mm wide and 1200mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement ring of cold twisted bars of 12 mm dia 1350 mm long (approx) 8 Nos. and reinforcement ring of cold twisted bar of 8mm dia -1800mm (approx) 8 nos. (with 150 mm spacing) as required with positioning of foundation bolts and providing 40 mm dia. (O.D.) DWC, HDPE pipe of 0.3 mtrs. length for cable entry & exit as reqd. (Drawing &Foundation should be approved by the Engineer In-charge)

Supplying and Fixing 4 Nos. 20 mm dia. X 600mm long GI foundation bolt(EN8 grade) with nuts,washer including 2 Nos. template of 2 mm thick size 200mmX200mm with 4 Nos. 24mm dia. holes to match with PCD of Pole base plate as reqd.

Fabrication, supplying & fixing of single/double/triple over hang galvanized arm bracket made out of Suitable dia.& 500 mm to 1500 mm long & top tube with suitable dia. etc. complete as required.(Design as approved by Engineer In-charge).

Supplying and drawing following size of PVC insulated copper conductor multicore cable in the existing poles and bracket from cable termination connector to the fitting i/c providing suitable lugs connections etc. as reqd. (Make-Polycab/L& T/Finolex/Havells/KEI) 3 core 1.5 sq.mm 1.1 KV grade

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output.LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).(Make-Polycab/Crompton/Wipro/Philips/Havells/Lighting Technology/Trilux/Surya/Orient/Regent) 120 Watt

LED Flood Light, powder coated pressure di castaluminium (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).(MakePolycab/Crompton/Wipro/Philips/Havells/Lighting Technology/Trilux/Surya/Orient/Regent) 150 watt

Supplying, fabrication & installation of outdoor type cubical feeder pillar of front area size 1 sq. mtr. (Prox.) depth not less than 40 cm, made out of M.S. sheet 2mm thick (14 SWG) duly compartmentalized having 4 strip busbar of 200 Amp capacity double door with locking arrangement for protection from rain, dust, duly fixed on MS angle iron frame work of size 50mm x 50mm x 6mm (NS) 90 cm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement : 2 sand :4 stone aggrete 20mm) and having Apron upto 45cm above ground from three sides & arrangement for fixing of following accessories mouted inside the cubical panel i/c making connection, inter connection with aluminium thimbles, earthing with two nos. earth struds duly Powder coated complete etc. as reqd. (Drawing of Feeder Pillar should be approved by E-in-C before installation at site) i/c supplying & fixing of following accessorries in the existing cubical panel board/feeder pillar including connection testing etc. as reqd. 63 Amp, 16 KA TPMCCB -1No.(Ics=100% Icu) 6A Double pole C Cure 10 KA MCB - 1 No. Selector switch for auto mannual operation- 1 No. 20 to 32 Amp, TPMCB, 16 KA - 3 No Indication lamps (RYB) with control HRC fuse with fuse fitting- 3 Nos. Power contactor 3 pole -40 Amp-1No. Digital Timer with 230 V AC coil Voltage-1 No Neutral link 4 way 63 A- 1 No. Manual push button switch (Auto-1, Manual-1) Danger Notice plate- 2 Nos.

Supplying, fabrication & installation of outdoor type cubical feeder pillar of front area size 1 sq. mtr. (apox.) depth not less than 40 cm, made out of M.S. sheet 2mm thick (14 SWG) duly compartmentalized having 4 strip busbar of 200 Amp capacity double door with locking arrangement for protection from rain, dust, duly fixed on MS angle iron frame work of size 50mm x 50mm x 6mm (NS) 90 cm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement : 2 sand :4 stone aggrete 20mm) and having Apron upto 45cm above ground from three sides & arrangement for fixing of following accessories mouted inside the cubical panel i/c making connection, inter connection with aluminium thimbles, earthing with two nos. earth struds duly Powder coated complete etc. as reqd. (Drawing of Feeder Pillar should be approved by E-in-C before lation at site) i/c supplying & fixing of following accessorries in the existing cubical panel board/feeder pillar including connection testing etc. as reqd. 100 Amp, 16 KA TPMCCB -1No.(Ics=100% Icu) 6A Double pole C Cure 10 KA MCB - 1 No. Selector switch for auto mannual operation- 1 No. 50 to 63 Amp, TPMCB, 16 KA - 1 No Indication lamps (RYB) with control HRC fuse with fuse fitting- 3 Nos. Power contactor 3 pole -95 Amp-1No. Digital Timer with 230 V AC coil Voltage-1 No Neutral link 4 way 63 A- 1 No. Manual push button switch (Auto-1, Manual-1) Danger Notice plate- 2 Nos.

Supplying and laying of one number XLPE power cable of 1.1 KV grade of 4Cx10 Sq mm UG cable size in the existing RCC/ HUME/ METAL pipe etc. as required.(Make-Polycab/Universal/Grandlay/Gloster/Havells/KEI)